Establishment profile
SIG SAUER, INC
72 PEASE BOULEVARD, NEWINGTON, NH, 03801
332994 — Small Arms, Ordnance, and Ordnance Accessories Manufacturing
EIN 020528156
Summary
SIG SAUER, INC has accumulated 0 OSHA violations across 2 inspections over 7 years of recorded history.
The most recent federal enforcement activity was recorded 4 years ago.
Federal records were found in 5 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SIG SAUER, INC appears in OSHA workplace safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, and CPSC product recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, SAM.gov federal debarment, CMS nursing home enforcement, or NHTSA vehicle recalls.
OSHA workplace safety
Peer comparison
Fewer violations than most other employers in NAICS 3329 within NH. Peer group: 44 employers. This establishment has 0 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 1,030 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SIG SAUER, INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 4+ years. Most recent activity: 4 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SIG SAUER, INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SIG SAUER, INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SIG SAUER, INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
Office of Foreign Labor Certification — labor condition applications for H-1B, H-2A, H-2B visa programs. Wage ratio = offered / prevailing wage. Historical data only: DOL ended OFLC Performance Data Disclosure publication in 2026, so the figures above reflect filings through the last ingested cycle and are not being refreshed. Treat as a historical snapshot, not a current signal.
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
SIG SAUER INC 72 PEASE BLVD · NEWINGTON, NH, 03801 | AirWaterRCRATRI | No Violation Identified | 1 | 0 | — | Jun 2025 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
CPSC product recalls
Top hazard: The recalled firearm sights contain a button cell battery that violates the mandatory federal regulations for consumer products containing button cell batteries because the button cell batteries can be easily accessed, posing an ingestion hazard. The products include a button cell battery which is not in child-resistant packaging as required by Reese's Law. In addition, the products do not bear the required warnings. When button cell batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death, posing an ingestion hazard to children.. Most recent recall: 2025-01-08. Source: Consumer Product Safety Commission, matched on company name.
CPSC recall roster
Every CPSC consumer-product recall associated with this manufacturer, most-recent first. Hazards reflect CPSC’s classification (laceration, fire, fall, choking, lead exposure, etc.). Each row links to the agency’s authoritative recall page for the full remedy / contact / recall-number detail. 1 recall shown · 1 distinct hazard categories.
| Recall | Date | Hazards | Units | CPSC |
|---|---|---|---|---|
SIG SAUER Recalls ROMEO5 Red Dot Firearm Sights Due to Ingestion Hazard; Violations of Reese's Law Federal Safety Regulations for Consumer Products with Button Cell Batteries and Child Resistant Button Cell Battery Packaging #25087 | Jan 2025 | The recalled firearm sights contain a button cell battery that violates the mandatory federal regulations for consumer products containing button cell batteries because the button cell batteries can be easily accessed, posing an ingestion hazard. The products include a button cell battery which is not in child-resistant packaging as required by Reese's Law. In addition, the products do not bear the required warnings. When button cell batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns and death, posing an ingestion hazard to children. | — | View → |
Source: Consumer Product Safety Commission. Recall details (specific products, sale dates, remedy instructions) live on the cpsc.gov record linked from each row.
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 332994 - SMALL ARMS, ORDNANCE, AND ORDNANCE ACCESSORIES MANUFACTURING. Last action: 2026-07-01. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2022-04-25 | Complaint | 0 | — | $0 | |
| 2019-04-17 | Complaint | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in small arms, ordnance, and ordnance accessories manufacturing within NH, ordered by federal enforcement volume:
- STURM, RUGER & COMPANY, INC.NEWPORT — 2 federal enforcement records
- GREEN MOUNTAIN RIFLE BARREL CO., INC.CONWAY — 1 federal enforcement record
- SIGARMS, INC.EXETER — 1 federal enforcement record
- Sig Sauer, IncROCHESTER — 0 federal enforcement records
Related searches
- Small Arms, Ordnance, and Ordnance Accessories ManufacturingAll employers in this industry
- Employers in NHState-wide enforcement data
- Small Arms, Ordnance, in NHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SIG SAUER, INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SIG SAUER, INC's OSHA violation history?
- SIG SAUER, INC has 2 OSHA inspections on record with 0 violations and $0 in total penalties.
- How does SIG SAUER, INC's safety record compare to its industry?
- SIG SAUER, INC operates in the small arms, ordnance, and ordnance accessories manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.9. SIG SAUER, INC's self-reported DART rate is 0.7 compared to an industry average of 1.1.