Establishment profile
SIFCO CUSTOM MACHINING
2430 WINNETKA AVE, GOLDEN VALLEY, MN, 55427
336412 — Aircraft Engine and Engine Parts Manufacturing
Summary
SIFCO CUSTOM MACHINING has accumulated 9 OSHA violations across 4 inspections over 22 years of recorded history, with $4,340 in total assessed penalties.
The establishment sits in the 73rd percentile for violations within its industry-state peer group of 42 employers. Inspection frequency runs at the 78th percentile. The most recent enforcement activity was recorded 19 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SIFCO CUSTOM MACHINING appears in OSHA workplace safety and NLRB labor relations records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Peer comparison
Above average violations in NAICS 3364 within MN. Peer group: 42 employers. This establishment has 9 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for SIFCO CUSTOM MACHINING. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SIFCO CUSTOM MACHINING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SIFCO CUSTOM MACHINING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SIFCO CUSTOM MACHINING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
Company-level in MN — for SIFCO CUSTOM MACHINING, not this location alone
National Labor Relations Board — unfair labor practice charges and union representation cases. The NLRB records cases at the company/regional level (no worksite address), so these are matched by company name and state and may span other SIFCO CUSTOM MACHINING locations in the same state.
NLRB cases
National Labor Relations Board cases involving this employer. Includes unfair labor practice (ULP) filings and representation election proceedings. NLRB enforcement is process-driven; no per-case monetary penalty is assessed (remedies are case-by-case backpay orders, posting requirements, election re-runs, etc.). 1 case · 1 ULP
| Case number | Type | Filed | Closed | Status | Region |
|---|---|---|---|---|---|
| 18-CA-019299 | Unfair labor practice | Feb 2010 | Jun 2010 | Closed | Region 18, Minneapolis, Minnesota |
Source: NLRB case files. Rows shown are those the agency has published. Region numbers (1–31) correspond to NLRB's geographic offices.
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SIFCO CUSTOM MACHINING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SIFCO CUSTOM MACHINING. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
SIFCO CUSTOM MACHINING CO 2430 WINNETKA AVE N · GOLDEN VALLEY, MN, 55427 | AirRCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SIFCO CUSTOM MACHINING. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-01-09 | Referral | 5 | 5 | $1,890 | |
| 2006-12-05 | Planned | 2 | 1 | $980 | |
| 2004-06-10 | Complaint | 0 | — | $0 | |
| 2003-09-18 | Complaint | 2 | 2 | $1,470 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in aircraft engine and engine parts manufacturing within MN, ordered by federal enforcement volume:
- BOLDUC AVIATION SPECIALIZED SERVICES INCBLAINE — 1 federal enforcement record
- HORIZON AIRCRAFT ENGINE SERVICES INC DBA BOLDUC AVMINNEAPOLIS — 1 federal enforcement record
- NORTHSTAR AEROSPACEDULUTH — 1 federal enforcement record
- WORLD AEROSPACE CORP.MAPLE GROVE — 1 federal enforcement record
Related searches
- Aircraft Engine and Engine Parts ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Aircraft Engine and in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SIFCO CUSTOM MACHINING from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SIFCO CUSTOM MACHINING's OSHA violation history?
- SIFCO CUSTOM MACHINING has 4 OSHA inspections on record with 9 violations and $4,340 in total penalties.
- How does SIFCO CUSTOM MACHINING's safety record compare to its industry?
- SIFCO CUSTOM MACHINING operates in the aircraft engine and engine parts manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2.