Establishment profile
SANDMEYER STEEL COMPANY
ONE SANDMEYER LANE PHILADELPHIA, PHILADELPHIA, PA, 19116
238320 — Painting and Wall Covering Contractors
EIN 231527381
Summary
SANDMEYER STEEL COMPANY has accumulated 12 OSHA violations across 4 inspections over 29 years of recorded history, with $5,100 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 1,900 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
SANDMEYER STEEL COMPANY appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 12 citations in this view · $5,100 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,100 | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | $825 | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0151 C | 1 | 1 | $825 | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0133 A03 | 1 | 1 | $700 | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0213 H04 | 1 | 1 | $688 | Feb 1997 | Feb 1997 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $550 | Feb 1997 | Feb 1997 |
| 29 CFR 1910.0136 A | 1 | 1 | $412 | Feb 1997 | Feb 1997 |
| 29 CFR 1910.0134 K06 | 1 | 1 | — | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0037 Q02 | 1 | 1 | — | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0157 G01 | 1 | 1 | — | Jul 2002 | Jul 2002 |
| 29 CFR 1910.0179 J02 | 1 | 1 | — | Feb 1997 | Feb 1997 |
| 29 CFR 1910.0147 C04 IIB | 1 | 1 | — | Feb 1997 | Feb 1997 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 2383 within PA. Peer group: 1,900 employers. This establishment has 12 OSHA violations; peer median is 1.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 109 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SANDMEYER STEEL COMPANY. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| May 19, 2012 | Fence,Lost Control,Motor Vehicle,Painter,Struck ByFatality | 1 | — | 1 |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for SANDMEYER STEEL COMPANY. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for SANDMEYER STEEL COMPANY. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for SANDMEYER STEEL COMPANY. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SANDMEYER STEEL COMPANY. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for SANDMEYER STEEL COMPANY. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
SANDMEYER STEEL CO 1 SANDMEYER LN. · PHILADELPHIA, PA, 19116 | RCRATRI | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SANDMEYER STEEL COMPANY. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- National Aeronautics and Space AdministrationPOLISHED INVAR PLATEScontract · Last action 2014-08-29$19,169
- Department of Homeland SecuritySST, PLATE, DISC, 1 3/4" THICK X 13" DIAMETER, TYPE 316L, SOLID, 71.47#, CUT FROM 316L STAINLESS STEEL PLATE. NOTE TO IM - THIS IS A PRIME VENDOR ITEM- METALS USA OR USE SANDMEYER STEEL CO. TEL. 1-800-523-3663A012 ALL SHIPMENTS AND DELIVERIES OF METAL PLATES MADE TO THE USCG YARD SHALL BE DELIVERED ON FLAT BED OR OPEN TOP TRAILERS; ANY SHIPMENT OF SINGLE OR MULTIPLES METAL PLATES SHALL REQUIRE SOME TYPE OF DUNNAGE. FOR ANY AND ALL TYPES OF METAL PLATES SUCH AS ALUMINUM, BRASS, BRONZE, COPPER, STEEL, STAINLESS STEEL, MONEL, ETC. FOR SMALL AND/ OR LARGE METAL PLATES OVERALL SIZES, 1 FT X 1 FT WIDE MINIMUM UP TO 8 FT X 29 FT LENGTH MAXIMUM. METAL PLATES THICKNESS OF SIZES 1/4" THICK MINIMUM TO 6" AND OVER SHALL REQUIRE DUNNAGE BETWEEN THE PLATES. ALL DELIVERIES OF METAL PLATES 1/4" THICK TO 6" AND OVER FOR SMALL AND/ OR LARGE PLATES SIZES SHALL HAVE SEPARATION OR SPACE BETWEEN THE METAL PLATES AS TO FACILITATE OFF LOADING AT DESTINATION. NOTE: ALUMINUM PLATE SHALL BE INTERLEAVED WITH PAPER BETWEEN EACH PLATE FOR SHIPMENT. THE PAPER SHALL BE OF A GRADE/WEIGHT THAT CORRESPONDS ACCORDINGLY WITH THE THICKNESS/WEIGHT OF MATERIAL BEING SHIPPED. MARKING: EACH PLATE SHALL BE LABELED (STICKER TYPE) WITH COAST GUARD STOCK NO. MATERIAL SPEC.AND GRADE, AND COAST GUARD PURCHASE ORDER NO. SST, PLATE, DISC, 1 3/4" THICK X 13" DIAMETER, TYPE 316L, SOLID, 71.47#, CUT FROM 316L STAINLESS STEEL PLATE. NOTE TO IM - THIS IS A PRIME VENDOR ITEM- METALS USA OR USE SANDMEYER STEEL CO. TEL. 1-800-523-3663A012 ALL SHIPMENTS AND DELIVERIES OF METAL PLATES MADE TO THE USCG YARD SHALL BE DELIVERED ON FLAT BED OR OPEN TOP TRAILERS; ANY SHIPMENT OF SINGLE OR MULTIPLES METAL PLATES SHALL REQUIRE SOME TYPE OF DUNNAGE. FOR ANY AND ALL TYPES OF METAL PLATES SUCH AS ALUMINUM, BRASS, BRONZE, COPPER, STEEL, STAINLESS STEEL, MONEL, ETC. FOR SMALL AND/ OR LARGE METAL PLATES OVERALL SIZES, 1 FT X 1 FT WIDE MINIMUM UP TO 8 FT X 29 FT LENGTH MAXIMUM. METAL PLATES THICKNESS OF SIZES 1/4" THICK MINIMUM TO 6" AND OVER SHALL REQUIRE DUNNAGE BETWEEN THE PLATES. ALL DELIVERIES OF METAL PLATES 1/4" THICK TO 6" AND OVER FOR SMALL AND/ OR LARGE PLATES SIZES SHALL HAVE SEPARATION OR SPACE BETWEEN THE METAL PLATES AS TO FACILITATE OFF LOADING AT DESTINATION. NOTE: ALUMINUM PLATE SHALL BE INTERLEAVED WITH PAPER BETWEEN EACH PLATE FOR SHIPMENT. THE PAPER SHALL BE OF A GRADE/WEIGHT THAT CORRESPONDS ACCORDINGLY WITH THE THICKNESS/WEIGHT OF MATERIAL BEING SHIPPED. MARKING: EACH PLATE SHALL BE LABELED (STICKER TYPE) WITH COAST GUARD STOCK NO. MATERIAL SPEC.AND GRADE, AND COAST GUARD PURCHASE ORDER NO. SST, PLATE, DISC, 1 3/4" THICK X 13" DIAMETER, TYPE 316L, SOLID, 71.47#, CUT FROM 316L STAINLESS STEEL PLATE. NOTE TO IM - THIS IS A PRIME VENDOR ITEM- METALS USA OR USE SANDMEYER STEEL CO. TEL. 1-800-523-3663A012 ALL SHIPMENTS AND DELIVERIES OF METAL PLATES MADE TO THE USCG YARD SHALL BE DELIVERED ON FLAT BED OR OPEN TOP TRAILERS; ANY SHIPMENT OF SINGLE OR MULTIPLES METAL PLATES SHALL REQUIRE SOME TYPE OF DUNNAGE. FOR ANY AND ALL TYPES OF METAL PLATES SUCH AS ALUMINUM, BRASS, BRONZE, COPPER, STEEL, STAINLESS STEEL, MONEL, ETC. FOR SMALL AND/ OR LARGE METAL PLATES OVERALL SIZES, 1 FT X 1 FT WIDE MINIMUM UP TO 8 FT X 29 FT LENGTH MAXIMUM. METAL PLATES THICKNESS OF SIZES 1/4" THICK MINIMUM TO 6" AND OVER SHALL REQUIRE DUNNAGE BETWEEN THE PLATES. ALL DELIVERIES OF METAL PLATES 1/4" THICK TO 6" AND OVER FOR SMALL AND/ OR LARGE PLATES SIZES SHALL HAVE SEPARATION OR SPACE BETWEEN THE METAL PLATES AS TO FACILITATE OFF LOADING AT DESTINATION. NOTE: ALUMINUM PLATE SHALL BE INTERLEAVED WITH PAPER BETWEEN EACH PLATE FOR SHIPMENT. THE PAPER SHALL BE OF A GRADE/WEIGHT THAT CORRESPONDS ACCORDINGLY WITH THE THICKNESS/WEIGHT OF MATERIAL BEING SHIPPED. MARKING: EACH PLATE SHALL BE LABELED (STICKER TYPE) WITH COAST GUARD STOCK NO. MATERIAL SPEC.AND GRADE, AND COAST GUARD PURCHASE ORDER NO.contract · Last action 2009-04-07$3,036
- Department of DefenseN421588106B256/PLATE,1/2"contract · Last action 2018-04-17$1,137
- Department of DefenseN421587319B217/PLATE 1/4contract · Last action 2017-11-30$898
- Department of DefenseN421585033B402/ PLATE 1-1/8"contract · Last action 2015-12-31$775
Federal contract dollars to this establishment. Primary NAICS: 332999 - ALL OTHER MISCELLANEOUS FABRICATED METAL PRODUCT MANUFACTURING. Last action: 2018-04-17. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-05-19 | Fatality/Catastrophe | 0 | — | $0 | |
| 2010-10-08 | Planned | 1 | — | $0 | |
| 2002-06-11 | Planned | 6 | 2 | $3,450 | |
| 1997-02-04 | Planned | 5 | 3 | $1,650 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in painting and wall covering contractors within PA, ordered by federal enforcement volume:
- AVALOTIS CORPORATIONPHILADELPHIA — 3 federal enforcement records
- AVALOTIS CORPORATIONPITTSBURGH — 3 federal enforcement records
- AVALOTIS CORPORATIONPHILADELPHIA — 3 federal enforcement records
- AVALOTIS CORPORATIONPHILADELPHIA — 3 federal enforcement records
- C.W. BEAL, INCERIE — 2 federal enforcement records
- SPECTRUM PAINTING, INC.GLENN MILLS — 2 federal enforcement records
- SPECTRUM PAINTING INC.UPPER ST CLAIR — 2 federal enforcement records
- Buttonwood Company, Inc.Jeffersonville — 2 federal enforcement records
- D & M PAINTING CO.WASHINGTON — 2 federal enforcement records
- Vercusky PaintingWest Hazleton — 2 federal enforcement records
Related searches
- Painting and Wall Covering ContractorsAll employers in this industry
- Employers in PAState-wide enforcement data
- Painting and Wall in PAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on SANDMEYER STEEL COMPANY from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is SANDMEYER STEEL COMPANY's OSHA violation history?
- SANDMEYER STEEL COMPANY has 4 OSHA inspections on record with 12 violations and $5,100 in total penalties.
- How does SANDMEYER STEEL COMPANY's safety record compare to its industry?
- SANDMEYER STEEL COMPANY operates in the painting and wall covering contractors industry. The industry average Total Recordable Incident Rate (TRIR) is 1.6. SANDMEYER STEEL COMPANY's self-reported DART rate is 0 compared to an industry average of 1.1.
- Has SANDMEYER STEEL COMPANY had any workplace fatalities?
- Yes. Federal records show 1 fatality investigation involving SANDMEYER STEEL COMPANY.