Establishment profile
ROSENBOOM MACHINE & TOOL INC.
1032 MAPLE ST., BOWLING GREEN, OH, 43402
332919 — Other Metal Valve and Pipe Fitting Manufacturing
Summary
ROSENBOOM MACHINE & TOOL INC. has accumulated 4 OSHA violations across 4 inspections over 11 years of recorded history, with $17,072 in total assessed penalties.
The establishment sits in the 40th percentile for violations within its industry-state peer group of 489 employers. Inspection frequency runs at the 78th percentile. The most recent enforcement activity was recorded 3 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ROSENBOOM MACHINE & TOOL INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 4 citations in this view · $17,072 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $9,572 | Jan 2015 | Sep 2020 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $4,200 | Jul 2015 | Jul 2015 |
| 29 CFR 1910.0147 D03 | 1 | 1 | $3,300 | Jul 2015 | Jul 2015 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3329 within OH. Peer group: 489 employers. This establishment has 4 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 169 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jun 2015 – Aug 2025 · 2 in last 5 years
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 18, 2025 | Injured by object held or wielded by person | Wrist(s) and arm(s) n.e.c. | Hospitalized | |
| Sep 4, 2020 | Caught in running equipment or machinery, n.e.c. | Finger(s), fingernail(s), unspecified | Amputation | |
| Nov 6, 2018 | Compressed or pinched by shifting objects or equipment | Finger(s), fingernail(s), unspecified | Amputation | |
| Jun 15, 2015 | Caught in running equipment or machinery during regular operation | Fingertip(s) | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Sep 4, 2020 | Amputated,Amputation,Caught Between,Clamp,Finger,High Pressure,Partial Amputation,Pinch Point,Pinched,Ram,Robotics,Training,Welder | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
Most recent federal enforcement activity recorded 3 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ROSENBOOM MACHINE & TOOL INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ROSENBOOM MACHINE & TOOL INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ROSENBOOM MACHINE & TOOL INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ROSENBOOM MACHINE & TOOL INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ROSENBOOM MACHINE & TOOL INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ROSENBOOM MACHINE & TOOL INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2026-02-24 | Referral | 0 | — | $0 | |
| 2020-09-10 | Referral | 1 | 1 | $6,072 | |
| 2015-06-18 | Referral | 2 | 2 | $7,500 | |
| 2014-11-24 | Complaint | 1 | 1 | $3,500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in other metal valve and pipe fitting manufacturing within OH, ordered by federal enforcement volume:
- AKRON BRASS COWOOSTER — 3 federal enforcement records
- ACTION COUPLING & EQUIPMENT, INC.HOLMESVILLE — 2 federal enforcement records
- CLARK RELIANCE LLCSTRONGSVILLE — 2 federal enforcement records
- SHAN-ROD, INC.BERLIN HEIGHTS — 1 federal enforcement record
- CLEVELAND SCREW PRODUCTSCLEVELAND — 1 federal enforcement record
- MONARCH WATER SYSTEMS, INC.XENIA — 1 federal enforcement record
- SEMINOLE TUBULAR PRODUCTS COCAMBRIDGE — 1 federal enforcement record
- ALLIED FITTING LPFAIRFIELD — 1 federal enforcement record
- PARKER HANNIFIN CORPORATION, TUBE FITTINGS DIV.COLUMBUS — 1 federal enforcement record
Related searches
- Other Metal Valve and Pipe Fitting ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Other Metal Valve in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ROSENBOOM MACHINE & TOOL INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ROSENBOOM MACHINE & TOOL INC.'s OSHA violation history?
- ROSENBOOM MACHINE & TOOL INC. has 4 OSHA inspections on record with 4 violations and $17,072 in total penalties.
- How does ROSENBOOM MACHINE & TOOL INC.'s safety record compare to its industry?
- ROSENBOOM MACHINE & TOOL INC. operates in the other metal valve and pipe fitting manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.5. ROSENBOOM MACHINE & TOOL INC.'s self-reported DART rate is 4.1 compared to an industry average of 2.7.