Establishment profile
ROBERT BOSCH TOOL CORPORATION
140 CORUM ROAD, EXCELSIOR SPRINGS, MO, 64024
326220 — Rubber and Plastics Hoses and Belting Manufacturing
Summary
ROBERT BOSCH TOOL CORPORATION has accumulated 15 OSHA violations across 5 inspections over 15 years of recorded history, with $25,435 in total assessed penalties.
The establishment sits in the 94th percentile for violations within its industry-state peer group of 49 employers. Inspection frequency runs at the 85th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ROBERT BOSCH TOOL CORPORATION appears in OSHA workplace safety, CPSC product recalls, and NHTSA vehicle recalls records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, or CMS nursing home enforcement.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 15 citations in this view · $25,435 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $4,410 | Dec 2010 | Dec 2010 |
| 29 CFR 1910.0151 C | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0178 P01 | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0219 C02 I | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0132 A | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0305 A01 I | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0305 J01 I | 1 | 1 | $2,380 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | $1,785 | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0303 F02 | 1 | 1 | $100 | Sep 2012 | Sep 2012 |
| 29 CFR 1910.0303 B07 IV | 1 | 1 | $100 | Sep 2012 | Sep 2012 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | — | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0219 C03 | 1 | 1 | — | Apr 2011 | Apr 2011 |
| 29 CFR 1910.0219 C04 I | 1 | 1 | — | Apr 2011 | Apr 2011 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3262 within MO. Peer group: 49 employers. This establishment has 15 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for ROBERT BOSCH TOOL CORPORATION. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ROBERT BOSCH TOOL CORPORATION. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ROBERT BOSCH TOOL CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ROBERT BOSCH TOOL CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ROBERT BOSCH TOOL CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ROBERT BOSCH TOOL CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ROBERT BOSCH TOOL CORPORATION. Verify directly with Environmental Protection Agency →
CPSC product recalls
Top hazard: The grinder can overheat while in use, causing the brush covers to melt and expose the end of the brush holder, posing a risk of burns to the consumer.. Most recent recall: 2016-05-11. Source: Consumer Product Safety Commission, matched on company name.
CPSC recall roster
Every CPSC consumer-product recall associated with this manufacturer, most-recent first. Hazards reflect CPSC’s classification (laceration, fire, fall, choking, lead exposure, etc.). Each row links to the agency’s authoritative recall page for the full remedy / contact / recall-number detail. 2 recalls shown · 2 distinct hazard categories.
| Recall | Date | Hazards | Units | CPSC |
|---|---|---|---|---|
Robert Bosch Tool Recalls Grinders Due to Risk of Burns #16158 | May 2016 | The grinder can overheat while in use, causing the brush covers to melt and expose the end of the brush holder, posing a risk of burns to the consumer. | — | View → |
Robert Bosch Tool Recalls Dremel Rotary Tool Due to Burn Hazard #15227 | Aug 2015 | The tool's circuit board can overheat and melt the tool's enclosure. If the tool is being held while overheating, it could present a risk of burn. Additionally, some tools may lose their speed control changing to high speed in use, turn on by themselves, or may not turn off, posing a personal injury hazard. | — | View → |
Source: Consumer Product Safety Commission. Recall details (specific products, sale dates, remedy instructions) live on the cpsc.gov record linked from each row.
NHTSA vehicle & equipment recalls
Most-recalled component: FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP. Most recent campaign: 2021-12-16. Source: National Highway Traffic Safety Administration, matched on manufacturer name.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-07-22 | Planned | 0 | — | $0 | |
| 2012-07-25 | Complaint | 2 | — | $200 | |
| 2011-03-09 | Planned | 8 | 8 | $14,280 | |
| 2011-03-09 | Planned | 4 | 4 | $6,545 | |
| 2010-10-27 | Complaint | 1 | 1 | $4,410 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in rubber and plastics hoses and belting manufacturing within MO, ordered by federal enforcement volume:
- TIMKENSPRINGFIELD — 3 federal enforcement records
- GILMOUR GROUPEXCELSIOR SPRINGS — 2 federal enforcement records
- CATERPILLAR INC.POMONA — 2 federal enforcement records
- CARLISLE POWER TRANSMISSION PRODUCTS, INC.SPRINGFIELD — 2 federal enforcement records
- TIMKEN BELTSSPRINGFIELD — 1 federal enforcement record
- PARKER HANNIFIN CORPKENNETT — 1 federal enforcement record
- CARLISLE TRANSPORTATION PRODUCTS, INC.SPRINGFIELD — 1 federal enforcement record
- GATES CORPORATIONCOLUMBIA — 1 federal enforcement record
- PARKER HANNIFIN CORPORATIONKENNETT — 1 federal enforcement record
- BUCKHORN RUBBER PRODUCTS, INC.HANNIBAL — 1 federal enforcement record
Related searches
- Rubber and Plastics Hoses and Belting ManufacturingAll employers in this industry
- Employers in MOState-wide enforcement data
- Rubber and Plastics in MOIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ROBERT BOSCH TOOL CORPORATION from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ROBERT BOSCH TOOL CORPORATION's OSHA violation history?
- ROBERT BOSCH TOOL CORPORATION has 5 OSHA inspections on record with 15 violations and $25,435 in total penalties.
- How does ROBERT BOSCH TOOL CORPORATION's safety record compare to its industry?
- ROBERT BOSCH TOOL CORPORATION operates in the rubber and plastics hoses and belting manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6.