Establishment profile
RAPID PRODUCTION TOOLING INC.
265 BUNYAN AVE., BERTHOUD, CO, 80513
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
RAPID PRODUCTION TOOLING INC. has accumulated 15 OSHA violations across 2 inspections over 17 years of recorded history, with $5,769 in total assessed penalties.
The establishment sits in the 86th percentile for violations within its industry-state peer group of 30 employers. Inspection frequency runs at the 55th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
RAPID PRODUCTION TOOLING INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 15 distinct standards shown · 15 citations in this view · $5,769 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,323 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $1,323 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | $1,323 | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0213 H01 | 1 | 1 | $750 | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $600 | Mar 2009 | Mar 2009 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $450 | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0151 C | 1 | 1 | — | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0110 F02 II | 1 | 1 | — | Jan 2014 | Jan 2014 |
| 29 CFR 1910.0303 G01 I | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0178 A06 | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0147 F02 II | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0213 H04 | 1 | 1 | — | Mar 2009 | Mar 2009 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within CO. Peer group: 30 employers. This establishment has 15 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 37 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for RAPID PRODUCTION TOOLING INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for RAPID PRODUCTION TOOLING INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for RAPID PRODUCTION TOOLING INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for RAPID PRODUCTION TOOLING INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for RAPID PRODUCTION TOOLING INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for RAPID PRODUCTION TOOLING INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for RAPID PRODUCTION TOOLING INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-07-18 | Planned | 6 | 2 | $3,969 | |
| 2009-03-02 | Planned | 9 | 5 | $1,800 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within CO, ordered by federal enforcement volume:
- TBC MFG. INCFOUNTAIN — 1 federal enforcement record
- FAUSTSON TOOL CORP.ARVADA — 1 federal enforcement record
- SAINT-GOBAIN ADVANCED CERAMICSCOLORADO SPRINGS — 1 federal enforcement record
- IHLY INDUSTRIES, INC.ENGLEWOOD — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in COState-wide enforcement data
- Special Die and in COIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on RAPID PRODUCTION TOOLING INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is RAPID PRODUCTION TOOLING INC.'s OSHA violation history?
- RAPID PRODUCTION TOOLING INC. has 2 OSHA inspections on record with 15 violations and $5,769 in total penalties.
- How does RAPID PRODUCTION TOOLING INC.'s safety record compare to its industry?
- RAPID PRODUCTION TOOLING INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. RAPID PRODUCTION TOOLING INC.'s self-reported DART rate is 3.42 compared to an industry average of 1.4.