Establishment profile
RALOID TOOL COMPANY INC
1 FARM TO MARKET RD, MECHANICVILLE, NY, 12118
Summary
RALOID TOOL COMPANY INC has accumulated 3 OSHA violations across 2 inspections over 17 years of recorded history, with $300 in total assessed penalties.
The establishment sits in the 40th percentile for violations within its industry-state peer group of 73 employers. Inspection frequency runs at the 57th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
RALOID TOOL COMPANY INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 3 distinct standards shown · 3 citations in this view · $300 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0242 B | 1 | 1 | $300 | Sep 2008 | Sep 2008 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Jan 2014 | Jan 2014 |
| 29 CFR 1910.1200 F05 I | 1 | 1 | — | Jan 2014 | Jan 2014 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3332 within NY. Peer group: 73 employers. This establishment has 3 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for RALOID TOOL COMPANY INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for RALOID TOOL COMPANY INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for RALOID TOOL COMPANY INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for RALOID TOOL COMPANY INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for RALOID TOOL COMPANY INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for RALOID TOOL COMPANY INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for RALOID TOOL COMPANY INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for RALOID TOOL COMPANY INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseSPRING PACK PER DRAWINGcontract · Last action 2023-04-04$1,015,142
- Department of DefenseFORGING, CTR SEC, FIXED/CROSSHEAD BODYcontract · Last action 2019-12-13$846,700
- Department of DefenseFORGING, FRT SEC, CROSSHEAD BODYcontract · Last action 2025-02-07$717,707
- Department of Defense250 EACH - ADL RAMP ASSEMBLY KITcontract · Last action 2023-05-30$471,500
- Department of DefenseFORGING, FOLLOWER FOR JMTC. SEE QUANTITIES INSIDE OF PURCHASE ORDERcontract · Last action 2021-12-22$455,030
- Department of DefenseFSC: 1025 NAME: BODY, STEEL FO PART NUMBER: 9377366Fcontract · Last action 2023-11-30$353,114
- Department of DefenseFORGING, CTR SEC, FIXED/CROSSHEAD BODYcontract · Last action 2018-05-03$328,782
- Department of DefenseROLLED RING FORGINGcontract · Last action 2023-04-05$314,240
- Department of Defense265 EACH - CRANK FORGINGS PER DRAWING # 8768783DFcontract · Last action 2025-10-02$304,750
- Department of Defense54 EACH - BUMPER ASSEMBLY PART NUMBER: 11583811contract · Last action 2024-06-12$249,426
- Department of Defense175 EACH - ADL RAMP ASSEMBLY KIT, PER DRAWING # 12528550, REV, NEW FOR THE 120MM M256contract · Last action 2021-11-09$248,596
- Department of Defense30 EACH - NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, PER DRAWING 12901534, REVISION INITIAL RELEASE. SIZE: 3 3/4" +1/8" OD X 8 FOOT + 1" LONG.contract · Last action 2017-07-25$161,228
- Department of DefenseVARIOUS COMPONENTS FOR XM35 CANNONcontract · Last action 2024-09-19$160,314
- Department of DefenseADL RAMP ASSEMBLY KITScontract · Last action 2022-11-28$159,075
- Department of Defense70 EA STEEL TUBING, 33 EA CRANKSHAFT, 33 EA KEY, 16 EA SPRINGcontract · Last action 2023-10-26$156,642
- Department of Defense33 EA CRANKSHAFT, 33 EA KEY YOKE, 27 EA SPRING, 80 EA STEEL TUBINGcontract · Last action 2023-10-26$152,440
- Department of Defense60 FT ALUMINUM ALLOY BAR; 100 FT STEEL ALLOY BAR.contract · Last action 2019-03-22$142,627
- Department of Defense200 FEET - BAR, ROUND, ALUMINUM, 6061-T6511 PER ASTM B221 OR ASTM B241/B241M OR 6061 T6 PER SAE AMS4150 OR ASTM B210, 13.25 (+/- .150) INCH OUTSIDE DIAMETER (TURNED) X 8.25 (+/- .150) INCH INSIDE DIAMETER (TREPANNED) X 7.75 (+ .125) INCH LENGTH (CUT), FOR 155MM M284 CANNON, LIGHTWEIGHT BORE EVACUATOR ASSEMBLY.contract · Last action 2016-09-23$130,080
- Department of Defense30 EACH - BUMPER ASSEMBL PART NUMBER: 11583811contract · Last action 2023-06-28$128,970
- Department of DefenseADL PIN MODULEcontract · Last action 2017-01-30$126,870
- Department of DefenseADL PIN MODULEcontract · Last action 2018-04-19$122,625
- Department of Defense33 EACH - BUMPER ASSY PER DRAWING # 11583811contract · Last action 2023-01-10$111,837
- Department of Defense20 EACH AND 14 EACH, CUSTOM 465 STAINLESS STEEL, SOLUTION ANNEALED AND SUB-ZERO COOLED, HOLLOW BAR, PER SAE AMS 5936, 7.500 + .062 INCH OUTSIDE DIAMETER, 5.500 +.062 INCH INSIDE DIAMETER, 9.00 + .500 INCH LENGTH, PART# 8767139RScontract · Last action 2020-04-22$111,010
- Department of DefenseVARIOUS M35 MACHINED PARTScontract · Last action 2024-07-25$108,452
- Department of Defense60 EACH - ALUMINUM ALLOY BAR ROUND 30 EACH - ALLUMINUM ALLOY BAR ROUNDcontract · Last action 2018-12-28$107,274
- Department of DefenseSTL,BRO,4.5" DIA., 4140H, ASTM-322contract · Last action 2025-04-16$106,662
- Department of DefenseSTEEL ALLOY, BAR SQUARE, 4340 IN ACCORDANCE WITH AMS6414, AMS6415 OR AMS6484, ANNEALED OR NORMALIZED, 9 INCH SQUARE, LENGTHS 10 FOOT MINIMUM, 12 FOOT MAXIMUM, 1-3/16 INCH RADIUS ACCEPTABLE, WITH MATERIAL CERTS. QTY = 144 FT.contract · Last action 2015-08-10$104,292
- Department of Defense5 EACH - MANDREL ROTARY FORGEcontract · Last action 2025-04-01$99,470
- Department of DefenseCOLLAR (FORGING) PER DWG #11578376DF REV J, QTY = 200 EACH PLUS OPTION FOR AN ADDITIONAL 200 EACH MAX.contract · Last action 2018-09-11$96,800
- Department of DefenseBOLTED CONNECTION HARDWAREcontract · Last action 2024-06-05$96,760
- Department of DefenseFSC: 9510 NAME: CUSTOM 465 STA PART NUMBER: 8767139RScontract · Last action 2022-06-10$93,933
- Department of Defense15 EA SHAFT, CRANK USED DURING CANNON PRODUCTION AT THE WVAcontract · Last action 2022-05-17$91,158
- Department of DefenseFSC: 1015 NAME: PLUG PART NUMBER: 11580045contract · Last action 2010-02-05$90,236
- Department of DefenseGAS PORT,BOLT NSN: 1005-01-512-6424 MFR CAGE: 19200 MFR PART NUMBER: 13001601contract · Last action 2018-07-27$89,856
- Department of DefenseFSC: 1025 NAME: SPINDLE, ROUGH PART NUMBER: 11581551contract · Last action 2008-10-27$88,270
- Department of DefenseADL PIN MODULE ASSEMBLIES - DRAWING 12528560-1, 152 EACH TOTAL DRAWING 12528560-2, 160 EACH TOTAL DRAWING 12528560-3, 156 EACH TOTAL.contract · Last action 2021-02-19$83,304
- Department of Defense300 EACH--STRAIGHT,SHAFTcontract · Last action 2017-04-26$83,100
- Department of Defense20 EACH - CUSTOM 465 STAINLESS STEELcontract · Last action 2022-12-12$82,960
- Department of DefenseFSC: 9510 NAME: CUSTOM 465 STA PART NUMBER: 8767139RScontract · Last action 2021-07-12$82,300
- Department of Defense110 EACH--ELECTRONIC COMPONENT PER 12528530, 80 EACH--ELECTRONIC COMPONENT PER 12528530contract · Last action 2021-12-20$81,890
- Department of DefenseRISERcontract · Last action 2019-08-23$75,488
- Department of DefenseSTEEL FORGING DIE BLOCKcontract · Last action 2022-09-28$74,904
- Department of DefenseFRONT FOOT FORGING-M119 RECUPERATOR-contract · Last action 2024-11-21$71,748
- Department of Defense475 EACH - STEEL AISI PLAIN CARBON ALLOYcontract · Last action 2013-10-15$70,704
- Department of DefenseFSC: 1015 NAME: STRIP PART NUMBER: 11580293-1contract · Last action 2023-12-08$65,736
- Department of Defense80 EA SPRING, 45 EA SLEEVE. 45 EA WASHER. 45 EA SLEEVE 62 EA WASHER, 50 EA WASHER, 55 EA CONDUCTOR, AT THE WATERVLIET ARSENAL, WATERVLIET NEW YORK.contract · Last action 2024-11-07$64,110
- Department of DefenseSTRIP, VEE 11580294contract · Last action 2022-11-16$63,900
- Department of DefenseFSC: 4710 NAME: STEEL TUBE 105 PART NUMBER: 8449329Ccontract · Last action 2017-01-20$62,424
- Department of DefenseFSC: 4710 NAME: 8449329C STEEL PART NUMBER: 8449329Ccontract · Last action 2018-04-10$62,250
- Department of Defense80 EACH - SHOCK ABSORBERcontract · Last action 2018-03-29$60,400
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2026-01-16. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-09-18 | Planned | 2 | — | $0 | |
| 2008-09-17 | Planned | 1 | 1 | $300 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within NY, ordered by federal enforcement volume:
- HONEYWELL INTERNATIONAL CORP.SYOSSET — 2 federal enforcement records
- EATON CORPORATIONHORSEHEADS — 2 federal enforcement records
- PFAUDLER, INC.ROCHESTER — 2 federal enforcement records
- UNIVERSAL INSTRUMENTS CORPORATIONCONKLIN — 2 federal enforcement records
- JET SEW CORPORATIONBARNEVELD — 1 federal enforcement record
- TENNYSON MACHINE COMPANY INC.MOUNT VERNON — 1 federal enforcement record
- DEROSA FABRICATIONS, INC.BOHEMIA — 1 federal enforcement record
- GUYSON CORPORATION OF USASARATOGA SPGS — 1 federal enforcement record
- BARS PRECISION INC.VICTOR — 1 federal enforcement record
- UNIVERSAL INSTRUMENT CORPORATIONCONKLIN — 0 federal enforcement records
Related searches
- NAICS 333All employers in this industry
- Employers in NYState-wide enforcement data
- Industry in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on RALOID TOOL COMPANY INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is RALOID TOOL COMPANY INC's OSHA violation history?
- RALOID TOOL COMPANY INC has 2 OSHA inspections on record with 3 violations and $300 in total penalties.