Establishment profile
PENN ENGINEERING & MANUFACTURING CORP.
2400 LOWERY STREET, WINSTON-SALEM, NC, 27103
Operated by Penn Engineering and Manufacturing Corp · 1 of 3 establishments
332721 — Precision Turned Product Manufacturing
EIN 230951065
Summary
PENN ENGINEERING & MANUFACTURING CORP. has accumulated 22 OSHA violations across 4 inspections over 27 years of recorded history, with $4,920 in total assessed penalties.
The establishment sits in the 82nd percentile for violations within its industry-state peer group of 170 employers. Inspection frequency runs at the 88th percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
PENN ENGINEERING & MANUFACTURING CORP. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $4,920 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 2 | 2 | $1,400 | Jul 1999 | Aug 2005 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $770 | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0304 F05 VC1 | 1 | 1 | $500 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $400 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $400 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0151 C | 1 | 1 | $330 | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0219 C02 I | 1 | 1 | $300 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0219 E03 I | 1 | 1 | $300 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $300 | Aug 2005 | Aug 2005 |
| 29 CFR 1910.0095 G07 II | 1 | 1 | $220 | Jul 1999 | Jul 1999 |
| 7F0102 | 1 | 1 | — | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0132 F01 | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0212 B | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0132 D01 | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0120 B01 I | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0095 G08 II | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0038 B02 | 1 | 1 | — | Jul 1999 | Jul 1999 |
| 29 CFR 1910.0038 A02 | 1 | 1 | — | Jul 1999 | Jul 1999 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within NC. Peer group: 170 employers. This establishment has 22 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 229 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PENN ENGINEERING & MANUFACTURING CORP.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for PENN ENGINEERING & MANUFACTURING CORP.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for PENN ENGINEERING & MANUFACTURING CORP.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for PENN ENGINEERING & MANUFACTURING CORP.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for PENN ENGINEERING & MANUFACTURING CORP.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for PENN ENGINEERING & MANUFACTURING CORP.. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2005-10-19 | Monitoring | 0 | — | $0 | |
| 2005-07-13 | Planned | 7 | 6 | $2,500 | |
| 2003-04-15 | Planned | 1 | — | $0 | |
| 1999-05-06 | Planned | 14 | 3 | $2,420 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
PENN ENGINEERING & MANUFACTURING CORP. is one of 3 establishments rolled up under the parent organization Penn Engineering and Manufacturing Corp.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Penn Engineering and Manufacturing Corp across all 3 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in precision turned product manufacturing within NC, ordered by federal enforcement volume:
- PRECISION INDUSTRIES, INC.CONOVER — 1 federal enforcement record
- BUSICK BROTHERS MACHINE, INC.RURAL HALL — 1 federal enforcement record
- CURTIS SCREW CO., INC.CORNELIUS — 1 federal enforcement record
- MACLEAN-FOGG COMPONENT SOLUTIONS, INC. DBA MACLEANCORNELIUS — 1 federal enforcement record
- GARY J. YOUNTS MACHINE COMPANYTHOMASVILLE — 1 federal enforcement record
- BIEDERMANN MANUFACTURING INDUSTRIES INCORPORATEDRALEIGH — 1 federal enforcement record
- PENN ENGINEERING & MANUFACTURING CORP.WINSTON-SALEM — 1 federal enforcement record
- METALCRAFT MANUFACTURING, INC.ARDEN — 1 federal enforcement record
- PENN ENGINEERING & MANUFACTURING CORP.WINSTON-SALEM — 0 federal enforcement records
- TECHNICAL POLYMERS, INCWINSTON-SALEM — 0 federal enforcement records
Other locations under this parent
Other establishments operated by Penn Engineering and Manufacturing Corp, ordered by federal enforcement volume:
- PENN ENGINEERING & MANUFACTURING CORP.WINSTON-SALEM, NC — 1 federal enforcement record
- PENN ENGINEERING & MANUFACTURING CORP.WINSTON-SALEM, NC — 0 federal enforcement records
Related searches
- All Penn Engineering and Manufacturing Corp locationsParent rollup
- Precision Turned Product ManufacturingAll employers in this industry
- Employers in NCState-wide enforcement data
- Precision Turned Product in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on PENN ENGINEERING & MANUFACTURING CORP. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Penn Engineering and Manufacturing Corp, which operates 3 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is PENN ENGINEERING & MANUFACTURING CORP.'s OSHA violation history?
- PENN ENGINEERING & MANUFACTURING CORP. has 4 OSHA inspections on record with 22 violations and $4,920 in total penalties.
- How does PENN ENGINEERING & MANUFACTURING CORP.'s safety record compare to its industry?
- PENN ENGINEERING & MANUFACTURING CORP. operates in the precision turned product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.6. PENN ENGINEERING & MANUFACTURING CORP.'s self-reported DART rate is 4.41 compared to an industry average of 1.6.