Establishment profile
PASCO MACHINE CO INC
518 W COLUMBIA ST, PASCO, WA, 99301
332710 — Machine Shops
EIN 910357860
Summary
PASCO MACHINE CO INC has accumulated 13 OSHA violations across 3 inspections over 8 years of recorded history, with $9,000 in total assessed penalties.
The establishment sits in the 79th percentile for violations within its industry-state peer group of 418 employers. Inspection frequency runs at the 69th percentile. The most recent enforcement activity was recorded 2 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
PASCO MACHINE CO INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Above average violations in NAICS 3327 within WA. Peer group: 418 employers. This establishment has 13 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 44 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PASCO MACHINE CO INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 2+ years. Most recent activity: 2 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for PASCO MACHINE CO INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for PASCO MACHINE CO INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for PASCO MACHINE CO INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for PASCO MACHINE CO INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for PASCO MACHINE CO INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for PASCO MACHINE CO INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseGALVANIZED STEEL GRATE COVER PANELS PER TECH SPECS FOR ICE HARBOR LOCK AND DAM.contract · Last action 2019-04-22$21,884
- Department of DefenseDIFFUSER HARDWARE FOR ICE HARBOR LOCK&DAM PROJECTcontract · Last action 2011-09-09$8,484
- Department of the InteriorRETHREADING VALVE STEMScontract · Last action 2009-09-22$8,127
- Department of DefenseUHMW (BLACK) PER ATTACHED DRAWING --- PRcontract · Last action 2008-09-18$8,032
- Department of DefenseREBUILT FLOWAY PUMPcontract · Last action 2013-04-26$7,765
- Department of DefenseSOUTH SHORE FISH LADDER DIFFUSER STEM AND HARDWAREcontract · Last action 2010-09-13$6,983
- Department of DefenseTHE PURPOSE OF THIS AWARD IS FOR THE CONTRACTOR TO PICKUP, REPAIR, AND DELIVER ONE PEABODY FLOWAY PUMP, MODEL 27FKL, TO LOWER MONUMENTAL LOCK AND DAM, IN KAHLOTUS, WA.contract · Last action 2013-08-23$6,847
- Department of DefenseFABRICATE ROLLER CARRIAGE ASSEMBLIES PERcontract · Last action 2018-01-16$5,160
- Department of DefenseTHIS IS A REQUEST FOR QUOTE FOR THE PURCHASE EIGHT (8) MANUFACTURED BRAKE PAD BACKING PLATES FOR THE U.S. ARMY CORPS OF ENGINEERS, WALLA WALLA DISTRICT, AT MCNARY LOCK AND DAM, UMATILLA, OR, PER THE TECHNICAL SPECIFICATIONS.contract · Last action 2016-01-26$4,845
- Department of DefenseIGF::OT::IGF REBUILD PEERLESS 20HH VERTICAL TURBINE PUMPcontract · Last action 2018-02-05$3,692
- Department of DefenseMANUFACTURE AND INSTALL BEARING RETAINERcontract · Last action 2011-01-07$3,642
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2019-04-22. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2024-05-17 | Referral | 7 | 2 | $1,800 | |
| 2022-10-13 | Planned | 0 | — | $0 | |
| 2017-08-03 | Planned | 6 | 5 | $7,200 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within WA, ordered by federal enforcement volume:
- WESTERN MACHINE WORKSTACOMA — 2 federal enforcement records
- THREE SIGMA MFG INCKENT — 2 federal enforcement records
- PACIFIC SHEET METAL INCMUKILTEO — 2 federal enforcement records
- TOOL GAUGE & MACHINE WORKS INCTACOMA — 2 federal enforcement records
- MEGA MACHINE SHOP INCTUMWATER — 2 federal enforcement records
- BAYVIEW COMPOSITES LLCMOUNT VERNON — 2 federal enforcement records
- SWEENY INDUSTRIES LLCPUYALLUP — 2 federal enforcement records
- AMERICAN ALLOY LLCSPOKANE VALLEY — 2 federal enforcement records
- IRONGATE MACHINE INCBELLINGHAM — 2 federal enforcement records
- ALPHA IRON LLCVANCOUVER — 2 federal enforcement records
Related searches
- Machine ShopsAll employers in this industry
- Employers in WAState-wide enforcement data
- Machine Shops in WAIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on PASCO MACHINE CO INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is PASCO MACHINE CO INC's OSHA violation history?
- PASCO MACHINE CO INC has 3 OSHA inspections on record with 13 violations and $9,000 in total penalties.
- How does PASCO MACHINE CO INC's safety record compare to its industry?
- PASCO MACHINE CO INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. PASCO MACHINE CO INC's self-reported DART rate is 2.39 compared to an industry average of 1.5.