Establishment profile
PARKER MACHINE CO. INC
28 SULLIVAN PARKWAY, FORT EDWARD, NY, 12828
332999 — All Other Miscellaneous Fabricated Metal Product Manufacturing
Summary
PARKER MACHINE CO. INC has accumulated 6 OSHA violations across 2 inspections over 21 years of recorded history, with $1,200 in total assessed penalties.
The establishment sits in the 57th percentile for violations within its industry-state peer group of 298 employers. Inspection frequency runs at the 49th percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
PARKER MACHINE CO. INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 6 distinct standards shown · 6 citations in this view · $1,200 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 B | 1 | 1 | $300 | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $300 | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $300 | Feb 2005 | Feb 2005 |
| 29 CFR 1910.0242 B | 1 | 1 | $300 | Feb 2005 | Feb 2005 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Mar 2009 | Mar 2009 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | — | Feb 2005 | Feb 2005 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3329 within NY. Peer group: 298 employers. This establishment has 6 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for PARKER MACHINE CO. INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for PARKER MACHINE CO. INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for PARKER MACHINE CO. INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for PARKER MACHINE CO. INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for PARKER MACHINE CO. INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for PARKER MACHINE CO. INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for PARKER MACHINE CO. INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for PARKER MACHINE CO. INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseFSC: 3455 NAME: INSERT, PART NUMBER: WTV-40660-T033contract · Last action 2008-04-17$22,555
- Department of Defense200 EA - CARBIDE INSERTS; 1080 EA - CARBIDE INSERTScontract · Last action 2014-08-28$16,184
- Department of Defense18 EACH - CARBIDE INSERT, 13 EACH - CARBIDE BALL MILL, 470 EACH - CARBIDE INSERT, 105 EACH - CARBIDE INSERTcontract · Last action 2019-09-10$14,494
- Department of DefenseVARIOUS ADAPTERS AND INSERTS, VARIOUS QUANTITIES.contract · Last action 2019-02-06$14,056
- Department of Defense14 VARIOUS TOOLING ITEMS - DIFFERENT QUANTITIES OF EACH ITEM.contract · Last action 2020-04-08$11,807
- Department of DefenseVARIOUS KENNAMETAL TOOLING FOR USE IN THE PRODUCTION SHOPS AT THE WATERVLIET ARSENAL.contract · Last action 2019-08-07$11,733
- Department of Defense1,000 EA - GROOVE INSERTcontract · Last action 2014-11-03$11,450
- Department of Defense2 EACH--KENNAMETAL BORING BAR, 26 EACH--KENNAMETAL BORRING BAR, 2 EACH TOOL HOLDER, 2 EACH--CUTTING TOOL HOLDER, 60 EACH--CARBIDE INSERTcontract · Last action 2012-01-04$11,064
- Department of Defense48 EA - CARBIDE DRILLcontract · Last action 2013-01-12$11,059
- Department of Defense400 EACH--CARBIDE INSERT, 3 EACH--MILLcontract · Last action 2021-12-13$11,049
- Department of DefenseFSC: 3455 NAME: INSERT PART NUMBER: QTY 300 EACHcontract · Last action 2010-09-07$10,845
- Department of DefenseINSERTS - 220 EA; INSERTS - 10 EA; INSERTS - 60 EA; CHUCKS - 2 EA; TAPS - 6 EA; BORING BARS - 3 EA; CARTRIDGES - 6 EA; INSERTS - 70 EA; INSERTS - 55 EA; SHIM SEATS - 10 EA.contract · Last action 2018-07-12$10,229
- Department of DefenseMILL, END, CARBIDE, 1. 25 DIAMETER, 5. 500 LOC, 8. 500 OAL, . 03 CORNER RADIUS, 6 FLUTE, EDP 6114127, KENNAMETAL HARVI III KENNAMETAL UJDE125ON6HBB MID:VR/Acontract · Last action 2025-08-25$10,000
- Department of Defense1 EA - SLEEVE, HYDRAULIC CHUCK; 2 EA - ADAPTER, END MILL; 9 EA - HOLDER, INSERT, RIGHT HAND; 15 EA - DRILL, SOLID CARBIDE; 36 EA - DRILL, CARBIDE PILOT 3XD; 224 EA - INSERT, CARBIDEcontract · Last action 2018-11-05$9,999
- Department of Defense30 EACH - DRILL, SOLID CARBIDE, 8.4 MILLIMETER DIAMETER, 10 MILLIMETER SHANK DIAMETER, 40 MILLIMETER LENGTH OF SHANK LS, 122 MILLIMETER OVERALL LENGTH, 80 MILLIMETER LENGTH OF FLUTE L3, L4, LENGTH OF CUT IS 68 MILLIMETER. 232 EACH - MILL, END BALL, 3/32 INCH DIAMETER, 1/8 INCH SHANK DIAMETER, .139 INCH LENGTH OF CUT, 1.500 INCH OVERALL LENGTH. HARVEY PART # 24593-C3.contract · Last action 2016-09-01$9,932
- Department of DefenseFSC: 3455 200 EACH - THREADED INSERTS PER DRAWING # 11578879T162Ccontract · Last action 2010-05-28$9,732
- Department of Defense1 EA - INSERT HODER; 2 EA - INSERT HOLDER; 19 EA - DRILL; 210 EA - CARBIDE INSERTScontract · Last action 2019-02-20$9,613
- Department of Defense23 EA - END MILL 2 EA - BORING BAR 41 EA - CARBIDE DRILL 75 EA - CARBIDE INSERT 20 EA - BORING BAR 12 EA - BORING BARcontract · Last action 2020-05-12$9,560
- Department of Defense1,927 EA - INSERTScontract · Last action 2016-02-11$9,539
- Department of Defense15 EA - DRILLcontract · Last action 2015-10-08$9,371
- Department of Defense2 EACH--HOLDER, 2 EACH--HOLDER, 12 EACH--MILL, 185 EACH--INSERT, 10 EACH--INSERT, 2 EACH-- BORING BARcontract · Last action 2022-04-11$9,120
- Department of DefenseTOOLINGcontract · Last action 2024-03-20$8,654
- Department of Defense7 PURCHASE REQUESTS - VARIOUS TOOLINGcontract · Last action 2024-12-06$8,583
- Department of Defense5 EACH--GROOVE HOLDER, 240 EACH-- CARBIDE INSERT, 20 EACH--CARBIDE INSERT, 75 EACH--CARBIDE INSERT, 120 EACH--CARBIDE INSERTcontract · Last action 2018-09-27$8,367
- Department of Defense1 EA - HOLDER, INSERT, 8 EA - HOLDER, INSERT, 120 EA - INSERT, 200 EA - INSERT, CARBIDEcontract · Last action 2020-02-03$8,340
- Department of Defense466 EACH--NSERT, CUTTING TOOL GRADE KC950contract · Last action 2011-02-07$8,225
- Department of Defense12 EACH--JOBBER DRILL, 2 EACH--BORE BAR, 2 EACH--COLLET, 298 EACH--INSERT, 3 EACH--CHUCKcontract · Last action 2023-02-21$8,195
- Department of Defense427 EACH--INSERT, CARBIDE CNMG643 GR KC950contract · Last action 2012-09-19$8,113
- Department of Defense24 EACH - DRILL, 4.5 MILLIMETER, SOLID CARBIDE, 165 MILLIMETER OVERALL LENGTH, 110 MILLIMETER FLUTE LENGTH, SPIRAL FLUTE, 2 FLUTES, COOLANT THROUGH, 5 MILLIMETER SHANK DIAMETER, STRAIGHT SHANK, TIAIN COATING. 6 EACH - TAP, HAND, STI, 1/2-20 INCH THREAD SIZE, H3 THREAD LIMIT, UNF THREAD STANDARD, 3B CLASS OF FIT, 3-3/8 INCH OVERALL LENGTH, 1-21/32 INCH THREAD LENGTH, .367 INCH SHANK DIAMETER, .275 INCH SQUARE SIZE, BRIGHT FINISH, HIGH SPEED STEEL, HELI-COIL.contract · Last action 2014-06-06$8,102
- Department of Defense50 LB PAIL EXTRUDE HONEcontract · Last action 2009-08-20$8,063
- Department of Defense120 EA - MILLING INSERT; 120 EA - CARBIDE INSERT; 160 EA - SCREW ON INSERT; 4 EA - BORING HEAD BORINGcontract · Last action 2014-08-27$7,995
- Department of Defense400 EACH--INSERT CARBIDE SNMG643MNcontract · Last action 2013-09-18$7,740
- Department of Defense315 EACH--INSERT, CARBIDE PART NUMBER: 1601091, 12 EACH--MILL, END, 9 EACH--MILL, END,contract · Last action 2019-03-22$7,712
- Department of DefenseFSC: 3455 NAME: INSERT PART NUMBER:contract · Last action 2007-12-04$7,560
- Department of Defense240 EACH--INSERT, CARBIDE, 6 EACH--BLADEcontract · Last action 2021-09-09$7,547
- Department of Defense230 EACH--INSERT, KENNAMETAL, 10 EACH--DRILL 3/4 IN DIA, 200 EACH CREMET INSERT, KENNAMETAL, 260 EACH--CARBIDE BURR, KENNAMETALcontract · Last action 2012-07-10$7,394
- Department of Defense130 EA - CARBIDE INSERTS&220 EA - CARBIDE INSERTScontract · Last action 2013-03-08$7,157
- Department of Defense5 EACH--PIN, 2 EACH--HOLDER, 2 EACH--HOLDER, 2 EACH--HOLDER, 40 EACH--INSERT, 4 EACH--TOOL HOLDER, 2 EACH--MILL, 5 EACH--MILLcontract · Last action 2024-02-20$7,146
- Department of DefenseFSC: 5350; 150 POUNDS OF EXTRUDE HONE MEDIA 905G. MSDS REQUIRED.contract · Last action 2011-07-21$7,115
- Department of Defense210 EACH - CARBIDE INSERT, STYLE: CNMG-643, KENNAMETAL GRADE: KC-850, HONE .002/.003. 120 EACH - INSERT, CARBIDE, CNMG 643RN, 80 DEGREE INCLUDED ANGLE, .750 INCH INSCRIBED CIRCLE, .250 INCH THICK, .047 INCH RADIUS, DIAMOND SHAPE, NEUTRAL RAKE, GRADE KC9110.contract · Last action 2015-01-12$7,113
- Department of Defense180 EACH - INSERT MILLING, 80 EACH - INSERT, 2 EACH - BORE BAR, 2 EACH - BORING BAR, 1 EACH - ADAPTER, 30 EACH - INSERTcontract · Last action 2018-09-04$6,740
- Department of DefenseFSC: 3455 NAME: INSERT PART NUMBER: 345500X960002 - 490 EAcontract · Last action 2010-01-25$6,738
- Department of Defense700 EACH--INSERT, CARBID PART NUMBER: 1601091contract · Last action 2023-04-26$6,695
- Department of Defense11 PURCHASE REQUESTS - VARIOUS TOOLINGcontract · Last action 2024-02-20$6,453
- Department of DefenseINSERTS AND MILL SCREWScontract · Last action 2009-11-05$6,422
- Department of Defense6 PRS VARIOUS TOOLING FOR THE PRODUCTION SHOPS AT THE WVAcontract · Last action 2019-03-25$6,420
- Department of Defense10 EACH--MILL, 205 EACH--INSERT, 10 EACH--INSERTcontract · Last action 2019-02-06$6,418
- Department of Defense605 EACH--INSERT, CNMG43contract · Last action 2018-10-15$6,353
- Department of Defense5 EA - TAP, HAND, 1 EA - HOLDER INSERT, 1 EA - HOLDER, 1 EA - HOLDER, CARBIDE INSERT, 4 EA - HOLDER, INSERT, 1 EA - MILL, FACE, 2 EA - BAR, BORE, CARBIDE, 4 EA - CHUCK, HYDRAULIC, 3 EA - DRILL, CARBIDEcontract · Last action 2020-01-17$6,237
- Department of Defense1 EACH--ADAPTER, 4 EACH--ADAPTER, 4 EACH--ADAPTER, 20 EACH--INSERT, 40 EACH--MILL, 1 EACH--HOLDER, 10 EACH--SCREWcontract · Last action 2020-10-21$6,202
Federal contract dollars to this establishment. Primary NAICS: 333515 - CUTTING TOOL AND MACHINE TOOL ACCESSORY MANUFACTURING. Last action: 2026-01-22. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2009-03-06 | Planned | 3 | 3 | $600 | |
| 2005-01-26 | Planned | 3 | 2 | $600 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other miscellaneous fabricated metal product manufacturing within NY, ordered by federal enforcement volume:
- CAMERON MANUFACTURING & DESIGN INCHORSEHEADS — 4 federal enforcement records
- MGA RESEARCH CORPORATIONAKRON — 2 federal enforcement records
- WENDT CORPORATIONTONAWANDA — 2 federal enforcement records
- ZAK INCORPORATEDGREEN ISLAND — 2 federal enforcement records
- CORNING, INC.CORNING — 2 federal enforcement records
- CHIEF FIRE PREVENTION AND MECHANICAL CORP.MOUNT VERNON — 2 federal enforcement records
- WATERMARK DESIGNS, LLCBROOKLYN — 2 federal enforcement records
- EMPIRE SAFE CO. INC.BRONX — 2 federal enforcement records
- AMENDOLA INDUSTRIES, INC.AMITYVILLE — 2 federal enforcement records
- EMPIRE ERECTORS AND ELECTRICAL COMPANY INC.NEW YORK — 2 federal enforcement records
Related searches
- All Other Miscellaneous Fabricated Metal Product ManufacturingAll employers in this industry
- Employers in NYState-wide enforcement data
- All Other Miscellaneous in NYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on PARKER MACHINE CO. INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is PARKER MACHINE CO. INC's OSHA violation history?
- PARKER MACHINE CO. INC has 2 OSHA inspections on record with 6 violations and $1,200 in total penalties.
- How does PARKER MACHINE CO. INC's safety record compare to its industry?
- PARKER MACHINE CO. INC operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6.