Skip to main content

Establishment profile

SONO-TEK CORPORATION

2012 ROUTE 9W, MILTON, NY, 12547
332999All Other Miscellaneous Fabricated Metal Product Manufacturing
EIN 141568099

Download as PDF →

OSHA inspections
2
over 34 years
Violations
6
$2,300 in penalties
Penalties
$2,300
$383 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

SONO-TEK CORPORATION has accumulated 6 OSHA violations across 2 inspections over 34 years of recorded history, with $2,300 in total assessed penalties.

The establishment sits in the 57th percentile for violations within its industry-state peer group of 295 employers. Inspection frequency runs at the 50th percentile. The most recent enforcement activity was recorded 19 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

SONO-TEK CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.1 / yr · last 34 yrs
Violations
6
0.2 / yr
Penalties
$2,300
$383 avg / violation
83% serious17% other
Inspection trigger · planned
2 of 2

100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 6 distinct standards shown · 6 citations in this view · $2,300 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.1200 E0111$600Aug 1991Aug 1991
29 CFR 1910.1200 H11$600Aug 1991Aug 1991
29 CFR 1910.0305 B0111$450Aug 1991Aug 1991
29 CFR 1910.1200 G0811$450Aug 1991Aug 1991
29 CFR 1910.0212 A0111$200Aug 2006Aug 2006
29 CFR 1910.0303 F11Aug 1991Aug 1991

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

57th

Above average violations in NAICS 3329 within NY. Peer group: 295 employers. This establishment has 6 OSHA violations; peer median is 5.

Fewer violationsMore violations
Penalty percentile
50th
peer median: $2,275
Inspection frequency
50th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
2.0
vs industry
+0.6
TRIR
2.0
vs industry
−0.6

Reported for 70 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.6
BLS SOII 2024
Industry avg DART
1.4
BLS SOII 2024
Self-reported TRIR
2.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for SONO-TEK CORPORATION. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
19 years ago

No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for SONO-TEK CORPORATION. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for SONO-TEK CORPORATION. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for SONO-TEK CORPORATION. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for SONO-TEK CORPORATION. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for SONO-TEK CORPORATION. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 2 facilities.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
SONO-TEK CORP
2012 RTE 9W #3 · MILTON, NY, 12547
RCRANo Violation Identified00Apr 2006View →
SONO-TEK CORP
2012 US RTE 9W BLDG 3 · MILTON, NY, 12547
AirNo Violation Identified00View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for SONO-TEK CORPORATION. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$474K
Obligated (all-time)
$1.1M
Awards
23
Top agency
Department of Defense
$515K
Top agencies by obligation (this location)
Department of Defense$515K
Department of Health and Human Services$194K
Department of Energy$176K
National Aeronautics and Space Administration$155K
Department of Agriculture$14K
Largest awards
  • Department of Defense
    NOVOCOAT 800 ULTRASONIC COATING SYSTEM WITH FINE SELECTION SPRAYING NOZZLE HIGH FLOW RATE/CONTINUOUS LIQUID DEPOSITION SYSTEM, HEAT PLATE, CONVEYOR, IMPACT SPRAY HEADS, AND ADDITIONAL NOZZLE
    contract · Last action 2025-04-30
    $304,910
  • Department of Health and Human Services
    EXACTACOAT COATING SYSTEM
    contract · Last action 2023-09-25
    $106,870
  • Department of Energy
    EXACTACOAT ULTRASONIC COATING SYSTEM
    contract · Last action 2017-04-07
    $100,612
  • Department of Energy
    ULTRASONIC SPRAY COATING SYSTEM
    contract · Last action 2014-09-04
    $75,200
  • Department of Defense
    ULTRASONIC GENERATOR
    contract · Last action 2010-05-25
    $74,373
  • National Aeronautics and Space Administration
    1 ULTRASONIC SPRAY COATING SYSTEM
    contract · Last action 2025-08-19
    $62,500
  • Department of Health and Human Services
    TAS::75 0600::TAS 1 MEDICOAT BENCHTOP STENT COATING SYSTEM, SONO-TEK CORPORATION QUOTE NUMBER STKQ7274
    contract · Last action 2010-09-13
    $59,665
  • National Aeronautics and Space Administration
    ULTRASONIC SELECTIVE SPRAYING SYSTEM, INCLUDING TUBING,INTERCONNECTS, SONIC SYRINGE, NOZZLES, INSTALLATION AND TRAINING
    contract · Last action 2015-09-18
    $40,800
  • Department of Defense
    NOZZLE
    contract · Last action 2020-09-24
    $40,262
  • National Aeronautics and Space Administration
    IGF::OT::IGF NOZZLE
    contract · Last action 2014-05-27
    $28,765
  • Department of Defense
    PN: 06-05108, BROAD BAND ULTRASONIC
    contract · Last action 2008-06-02
    $28,340
  • National Aeronautics and Space Administration
    SONOFLUX RETROFIT SYSTEM
    contract · Last action 2008-09-05
    $22,900
  • Department of Defense
    NOZZLES, PUMPS ACCESSORIES
    contract · Last action 2008-04-21
    $19,980
  • Department of Defense
    NOZZLE&COMPOENENTS
    contract · Last action 2014-10-23
    $15,055
  • Department of Defense
    TO PROVIDE FUNDING FOR PURCHASE SONO-TEK
    contract · Last action 2012-01-13
    $11,130
  • Department of Health and Human Services
    ULTRASONIC ATOMIZING SPRAY SYSTEM/"UASS"
    contract · Last action 2013-08-26
    $11,115
  • Department of Health and Human Services
    ULTRASONIC SAMPLING UNIT
    contract · Last action 2012-08-29
    $10,630
  • Department of Agriculture
    ULTRASONIC ATOMIZING NOZZLE
    contract · Last action 2011-02-25
    $10,570
  • Department of Defense
    PART NUMBER: 06-05108, BROAD BAND ULTRAS
    contract · Last action 2011-04-26
    $6,941
  • Department of Defense
    ULTRASONIC ATOMIZING NOZZLE, BROAD BAND ULTRASONIC GENERATOR AND COAXIAL CABLE.
    contract · Last action 2010-12-23
    $6,845
  • Department of Defense
    PART NUMBER: 06-05108.
    contract · Last action 2010-09-01
    $6,845
  • Department of Health and Human Services
    ULTRASONIC ATOMIZING NOZZLE FOR NIOSH RESEARCH
    contract · Last action 2012-09-05
    $5,785
  • Department of Agriculture
    BROAD BAND ULTRASONIC GENERATOR
    contract · Last action 2010-02-02
    $3,640

Federal contract dollars to this establishment. Primary NAICS: 339999 - ALL OTHER MISCELLANEOUS MANUFACTURING. Last action: 2025-08-19. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2006-07-19Planned11$200
1991-07-19Planned54$2,100

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in all other miscellaneous fabricated metal product manufacturing within NY, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on SONO-TEK CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is SONO-TEK CORPORATION's OSHA violation history?
SONO-TEK CORPORATION has 2 OSHA inspections on record with 6 violations and $2,300 in total penalties.
How does SONO-TEK CORPORATION's safety record compare to its industry?
SONO-TEK CORPORATION operates in the all other miscellaneous fabricated metal product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.6. SONO-TEK CORPORATION's self-reported DART rate is 2 compared to an industry average of 1.4.
SONO-TEK CORPORATION — OSHA Violations & Safety Record | FastDOL