Establishment profile
OMNI TOOL, INC.
2710 BOULDER PARK CT., WINSTON-SALEM, NC, 27101
333511 — Industrial Mold Manufacturing
Summary
OMNI TOOL, INC. has accumulated 34 OSHA violations across 4 inspections over 23 years of recorded history, with $1,950 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 126 employers. Inspection frequency runs at the 82nd percentile. The most recent enforcement activity was recorded 19 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
OMNI TOOL, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $1,950 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0179 J03 | 2 | 2 | — | Feb 2003 | Jul 2006 |
| 29 CFR 1910.1200 H01 I | 2 | 2 | — | Feb 2003 | Jul 2006 |
| 29 CFR 1910.1200 E01 | 2 | 2 | — | Feb 2003 | Jul 2006 |
| 29 CFR 1910.0157 C01 | 2 | 2 | — | Feb 2003 | Jul 2006 |
| 29 CFR 1910.0132 D02 | 2 | 2 | — | Feb 2003 | Jul 2006 |
| 29 CFR 1910.0133 A02 | 1 | 1 | $500 | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0179 J02 IV | 1 | 1 | $250 | Jul 2006 | Jul 2006 |
| 29 CFR 9501.2901 | 1 | 1 | $250 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0179 K01 I | 1 | 1 | $250 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $175 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $125 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $100 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0212 B | 1 | 1 | $100 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $100 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $100 | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0022 A03 | 1 | 1 | — | Feb 2007 | Feb 2007 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0132 F04 | 1 | 1 | — | Jul 2006 | Jul 2006 |
| 29 CFR 1910.0157 E02 | 1 | 1 | — | Feb 2003 | Feb 2003 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Feb 2003 | Feb 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within NC. Peer group: 126 employers. This establishment has 34 OSHA violations; peer median is 9.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for OMNI TOOL, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for OMNI TOOL, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for OMNI TOOL, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for OMNI TOOL, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for OMNI TOOL, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for OMNI TOOL, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for OMNI TOOL, INC.. Verify directly with Environmental Protection Agency →
Federal contracts
This location
Federal contract dollars to this establishment. Primary NAICS: 423840 - INDUSTRIAL SUPPLIES MERCHANT WHOLESALERS. Last action: 2009-06-10. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-01-31 | Complaint | 1 | — | $0 | |
| 2006-06-07 | Planned | 9 | 5 | $750 | |
| 2003-01-22 | Planned | 21 | 12 | $1,200 | |
| 2003-01-22 | Planned | 3 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in industrial mold manufacturing within NC, ordered by federal enforcement volume:
- CONCRETE MACHINERY COMPANY, INC.HICKORY — 1 federal enforcement record
- HASCO AMERICA, INC.ARDEN — 1 federal enforcement record
- EMERALD TOOL AND MOLD INCKERNERSVILLE — 1 federal enforcement record
- SELECT MOLD SERVICES INC.FAYETTEVILLE — 1 federal enforcement record
- NORTHEAST TOOL AND MFG. COMPANYMATTHEWS — 1 federal enforcement record
- A & M TOOL INC.HORSE SHOE — 1 federal enforcement record
- AMERITECH DIE & MOLD, INC.MOORESVILLE — 1 federal enforcement record
- CUSTOM MACHINE & TOOLING, INC.GRAHAM — 1 federal enforcement record
- WAYNE WIRE DIE COMPANYCOLUMBUS — 1 federal enforcement record
- ATLAS MOLD, INC.ARDEN — 1 federal enforcement record
Related searches
- Industrial Mold ManufacturingAll employers in this industry
- Employers in NCState-wide enforcement data
- Industrial Mold Manufacturing in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on OMNI TOOL, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is OMNI TOOL, INC.'s OSHA violation history?
- OMNI TOOL, INC. has 4 OSHA inspections on record with 34 violations and $1,950 in total penalties.
- How does OMNI TOOL, INC.'s safety record compare to its industry?
- OMNI TOOL, INC. operates in the industrial mold manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1.