Establishment profile
NIANTIC TOOL, INC.
32 INDUSTRIAL PARK ROAD, EAST LYME, CT, 06333
332710 — Machine Shops
Summary
NIANTIC TOOL, INC. has accumulated 17 OSHA violations across 1 inspection over 20 years of recorded history, with $1,613 in total assessed penalties.
The establishment sits in the 82nd percentile for violations within its industry-state peer group of 197 employers. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
NIANTIC TOOL, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification, FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Peer comparison
Worse on violations than most other employers in NAICS 3327 within CT. Peer group: 197 employers. This establishment has 17 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for NIANTIC TOOL, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for NIANTIC TOOL, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for NIANTIC TOOL, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for NIANTIC TOOL, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for NIANTIC TOOL, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC)
No H-1B, H-2A, or H-2B labor condition applications on file for NIANTIC TOOL, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for NIANTIC TOOL, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for NIANTIC TOOL, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense4508720835!PARTS KITcontract · Last action 2008-09-23$167,580
- Department of DefenseOA-9070B ACOUSTIC SENSOR REPAIR PARTS IGF;OT;IGFcontract · Last action 2014-08-29$53,424
- Department of DefenseEND PLATES AND HOUSINGS (9070B)contract · Last action 2017-06-26$35,672
- Department of DefenseBULKHEAD FOR SLIP RINGcontract · Last action 2017-01-31$29,555
- Department of DefenseDAWG SENSOR HOUSING 9070contract · Last action 2015-11-09$28,528
- Department of DefenseOK-542 UNIT 1 AND 2 RESTORATION IGF::OT::IGFcontract · Last action 2015-02-24$28,500
- Department of DefenseTRS-1 INTERFACE SUPPORT STRUCTURE (ISS)contract · Last action 2014-07-09$27,919
- Department of Defense4511110010!PARTS KIT,VALVEcontract · Last action 2009-06-15$27,810
- Department of DefenseMOUNT, PIZEOELECTRIC DISCcontract · Last action 2010-12-14$26,700
- Department of DefenseELECTROMAGNETIC SENSOR HOUSING AND SUPPORT COILS (9070B)contract · Last action 2017-04-26$24,936
- Department of DefenseHOUSING, SLIP RINGcontract · Last action 2013-09-12$22,380
- Department of DefenseTHIS REQUIREMENT IS FOR TEN (10) END PLATES AND THREE (3) HOUSINGS BUILT-TO PRINT IN SUPPORT OF THE ELECTROMAGNETIC SENSORS FOR USE ON THE SSN 688 AND SSN 774.contract · Last action 2017-04-05$19,652
- Department of DefenseSERVICE DRIVE DRUM HUBcontract · Last action 2016-11-29$19,525
- Department of DefenseCONTACT SOCKETcontract · Last action 2010-07-23$19,072
- Department of Defense90 DEGREE SOCKET WELD ELBOWcontract · Last action 2017-09-26$18,193
- Department of DefenseDECALcontract · Last action 2008-02-05$17,820
- Department of DefenseISOLATOR BLOCKS, TRcontract · Last action 2008-11-06$16,205
- Department of DefenseOK-410 PROTECTIVE SCREENScontract · Last action 2016-05-03$15,475
- Department of Defense4524645445!OTHER GROCERY AND RELATED PRODcontract · Last action 2013-06-03$13,194
- Department of DefenseBEARING, JOURNALcontract · Last action 2010-05-24$12,515
- Department of DefenseBEARING,SLEEVEcontract · Last action 2017-07-18$11,616
- Department of DefenseHOUSING, TRANSDUCERcontract · Last action 2009-06-23$11,450
- Department of DefenseHOLD DOWN BARcontract · Last action 2015-06-18$10,890
- Department of DefenseBEARINGcontract · Last action 2014-05-14$10,597
- Department of DefenseW02298 542 IDLER DRUM MOUNTING HUB.contract · Last action 2016-11-21$9,596
- Department of DefenseHOLD DOWN BARcontract · Last action 2011-03-17$9,335
- Department of DefenseOK-542 ROLLERScontract · Last action 2015-02-18$8,817
- Department of DefenseHOLD DOWN BARcontract · Last action 2014-11-21$8,595
- Department of DefenseSUPPORT, MOTOR TRANSPORT, OA-9070 MOTORcontract · Last action 2013-06-05$8,435
- Department of DefenseCOMPENSATOR CAPS AND BULLETS TO SUPPORT SUBMARINE THIN-LINE TOWED ARRAY HANDLING SYSTEMcontract · Last action 2017-04-27$8,120
- Department of Defense8500534243!SPROCKET WHEELcontract · Last action 2013-12-17$7,944
- Department of DefensePIPE 3/8" NPS SCHEDULE 80. IGF::OT::IGFcontract · Last action 2013-09-30$7,623
- Department of DefenseINLET GUIDE BRACKETcontract · Last action 2017-05-18$6,960
- Department of DefenseMANUFACTURE POLE CAPScontract · Last action 2016-02-23$6,837
- Department of DefenseMFTA CABLE RETAINERcontract · Last action 2015-02-20$6,636
- Department of DefenseRECOVER DRIVE DRUM 53X-01-101contract · Last action 2024-09-24$6,630
- Department of DefenseIGF::OT::IGF HOLD DOWN BARcontract · Last action 2016-05-13$6,362
- Department of DefenseROD, LIFTINGcontract · Last action 2009-12-15$6,304
- Department of DefenseCOUPLING INSERT-IAW DRAWING 53X-01-124contract · Last action 2010-09-08$5,904
- Department of DefenseHOUSING FOR OPTICAL SENSORcontract · Last action 2013-01-17$5,729
- Department of Defense8500263972!VALVE GOVERNOR PILOcontract · Last action 2013-06-26$5,250
- Department of DefenseHARDWARE, COMMERCIALcontract · Last action 2012-05-08$4,947
- Department of DefenseBEARING RETAINERcontract · Last action 2010-05-11$4,924
- Department of DefenseBEARING, JOURNALcontract · Last action 2015-03-17$4,842
- Department of Defense8500486383!SPROCKET WHEELcontract · Last action 2013-11-21$4,697
- Department of DefenseMOUNT, PIEZOELECcontract · Last action 2010-03-17$4,580
- Department of DefensePINCH ROLLER ASSEMBLY BAR STOPScontract · Last action 2017-05-04$4,352
- Department of DefenseBEARING, JOURNALcontract · Last action 2009-05-28$3,790
- Department of DefenseSERVICE MOTOR, FACE VALVE, AND ROTOR. IGF::OT::IGFcontract · Last action 2015-06-30$3,736
- Department of DefenseHOUSING, SLIP RINGcontract · Last action 2015-07-17$3,725
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2024-09-24. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2005-10-12 | Planned | 17 | 17 | $1,613 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within CT, ordered by federal enforcement volume:
- ESTEEM MANUFACTURING COMPANY, INC.SOUTH WINDSOR — 2 federal enforcement records
- PARASON MACHINE, INC.DEEP RIVER — 2 federal enforcement records
- INDUSTRIAL SAWS, INC.TORRINGTON — 2 federal enforcement records
- FORREST MACHINE, INC.ROCKY HILL — 1 federal enforcement record
- CANDLEWOOD TOOL AND MACHINE SHOP, INC.GAYLORDSVILLE — 1 federal enforcement record
- GREER MANUFACTURING, INC.PROSPECT — 1 federal enforcement record
- R.M. MACHINE, INC.TORRINGTON — 1 federal enforcement record
- METALPRO, INC.OLD SAYBROOK — 1 federal enforcement record
- BARTLEY MFG. COMPANY, INC.WATERBURY — 1 federal enforcement record
- REED AND STEFANOW MACHINE AND TOOL COMPANY, INC.BRISTOL — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in CTState-wide enforcement data
- Machine Shops in CTIndustry × state cross-filter
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →About this data
This profile aggregates federal enforcement records on NIANTIC TOOL, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Frequently asked
- What is NIANTIC TOOL, INC.'s OSHA violation history?
- NIANTIC TOOL, INC. has 1 OSHA inspection on record with 17 violations and $1,612.5 in total penalties.
- How does NIANTIC TOOL, INC.'s safety record compare to its industry?
- NIANTIC TOOL, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.