Establishment profile
MYCO CORP. - PLASTIC INJECTION MOLDING
416 EAST MAIN STREET, JUNCTION CITY, OH, 43748
326199 — All Other Plastics Product Manufacturing
Summary
MYCO CORP. - PLASTIC INJECTION MOLDING has accumulated 35 OSHA violations across 3 inspections over 32 years of recorded history, with $9,431 in total assessed penalties.
The establishment sits in the 96th percentile for violations within its industry-state peer group of 779 employers. Inspection frequency runs at the 64th percentile. The most recent enforcement activity was recorded 23 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MYCO CORP. - PLASTIC INJECTION MOLDING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $9,431 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1200 E01 | 2 | 2 | $2,515 | Sep 1994 | Apr 2003 |
| 29 CFR 1910.0023 C01 | 2 | 2 | $574 | Sep 1994 | May 2003 |
| 29 CFR 1910.0157 C01 | 2 | 2 | $341 | Apr 2003 | May 2003 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | $1,625 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,125 | May 2003 | May 2003 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $394 | May 2003 | May 2003 |
| 29 CFR 1910.0022 A02 | 1 | 1 | $341 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0132 A | 1 | 1 | $341 | Apr 2003 | Apr 2003 |
| 29 CFR 1910.0253 B02 II | 1 | 1 | $315 | May 2003 | May 2003 |
| 29 CFR 1910.0305 G02 II | 1 | 1 | $240 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.1200 H | 1 | 1 | $240 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0038 A05 III | 1 | 1 | $240 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0157 G02 | 1 | 1 | $240 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.1200 G01 | 1 | 1 | $240 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $240 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0305 B02 | 1 | 1 | $240 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0024 H | 1 | 1 | $180 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | — | May 2003 | May 2003 |
| 29 CFR 1910.0303 G01 II | 1 | 1 | — | May 2003 | May 2003 |
| 29 CFR 1910.0147 C05 IID | 1 | 1 | — | May 2003 | May 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3261 within OH. Peer group: 779 employers. This establishment has 35 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for MYCO CORP. - PLASTIC INJECTION MOLDING. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MYCO CORP. - PLASTIC INJECTION MOLDING. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 23+ years. Most recent activity: 23 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MYCO CORP. - PLASTIC INJECTION MOLDING. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MYCO CORP. - PLASTIC INJECTION MOLDING. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MYCO CORP. - PLASTIC INJECTION MOLDING. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MYCO CORP. - PLASTIC INJECTION MOLDING. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MYCO CORP. - PLASTIC INJECTION MOLDING. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2003-04-18 | Planned | 15 | 10 | $2,228 | |
| 2003-04-08 | Complaint | 6 | 6 | $4,924 | |
| 1994-08-24 | Complaint | 14 | 10 | $2,280 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in all other plastics product manufacturing within OH, ordered by federal enforcement volume:
- CONTINENTAL STRUCTURAL PLASTICS, LLC.CAREY — 3 federal enforcement records
- LEAR CORPORATIONHURON — 3 federal enforcement records
- LAFARGE NORTH AMERICACLEVELAND — 3 federal enforcement records
- TEIJIN AUTOMOTIVE TECHNOLOGIES, INCNORTH BALTIMORE — 3 federal enforcement records
- OKAMOTO SANDUSKY MANUFACTURING, LLCSANDUSKY — 3 federal enforcement records
- ORBIS CORPORATIONMENTOR — 2 federal enforcement records
- CORE SYSTEMS INC.PAINESVILLE — 2 federal enforcement records
- CONSOLIDATED CONTAINER COMPANYWARREN — 2 federal enforcement records
- REVERE PLASTICS SYSTEMS, LLCCLYDE — 2 federal enforcement records
- RohrerWadsworth — 2 federal enforcement records
Related searches
- All Other Plastics Product ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- All Other Plastics in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MYCO CORP. - PLASTIC INJECTION MOLDING from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MYCO CORP. - PLASTIC INJECTION MOLDING's OSHA violation history?
- MYCO CORP. - PLASTIC INJECTION MOLDING has 3 OSHA inspections on record with 35 violations and $9,431.25 in total penalties.
- How does MYCO CORP. - PLASTIC INJECTION MOLDING's safety record compare to its industry?
- MYCO CORP. - PLASTIC INJECTION MOLDING operates in the all other plastics product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.