Skip to main content

Establishment profile

MTD Products Inc.

305 Mansfield Avenue, SHELBY, OH, 44875
Operated by STANLEY BLACK & DECKER, INC · 1 of 181 establishments
333112Lawn and Garden Tractor and Home Lawn and Garden Equipment Manufacturing

Download as PDF →

OSHA inspections
0
Violations
0
Penalties
$0
Context
No OSHA inspections on record. This does not mean the employer is violation-free — OSHA inspects a small fraction of workplaces annually.

Summary

MTD Products Inc. has no OSHA inspection history on file. Federal records covering wage, environmental, labor relations, and other agencies are noted below where present.

The most recent federal enforcement activity was recorded 0 days ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MTD Products Inc. appears in CPSC product recalls record only. No matching records were found in OSHA workplace safety, WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

No OSHA inspections, citations, or accidents on file for MTD Products Inc.. Verify directly with Occupational Safety and Health Administration

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
2.4
vs industry
+1.2
TRIR
3.9
vs industry
+2.1

Reported for 375 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
1.8
BLS SOII 2024
Industry avg DART
1.2
BLS SOII 2024
Self-reported TRIR
3.9
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

OSHA severe injury reports

Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Nov 2023

Reports
1
Hospitalizations
1
Amputations
0
Eye losses
0

Most frequent event: Fall on same level due to tripping over an object

Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).

Severe injury reports — events

Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.

DateEventBody partOutcome
Nov 15, 2023Fall on same level due to tripping over an objectHip(s)Hospitalized

Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
0 days ago

Most recent federal enforcement activity recorded 0 days ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for MTD Products Inc.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for MTD Products Inc.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for MTD Products Inc.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MTD Products Inc.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MTD Products Inc.. Verify directly with Environmental Protection Agency

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
MTD PRODUCTS, INC.
305 MANSFIELD AVE. · SHELBY, OH, 44875
AirNo Violation Identified00Apr 2016View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

CPSC product recalls

Total recalls
5
Last 5 years
2
Last 12 months
0
Units recalled
0

Top hazard: The blade spindle shaft can break during lawn mowing and the broken blade pieces can become projectiles. This poses a risk of an impact injury to bystanders or damage to property.. Most recent recall: 2022-06-23. Source: Consumer Product Safety Commission, matched on company name.

CPSC recall roster

Every CPSC consumer-product recall associated with this manufacturer, most-recent first. Hazards reflect CPSC’s classification (laceration, fire, fall, choking, lead exposure, etc.). Each row links to the agency’s authoritative recall page for the full remedy / contact / recall-number detail. 5 recalls shown · 5 distinct hazard categories.

RecallDateHazardsUnitsCPSC
MTD Products Recalls Troy-Bilt Spacesavr Walk-Behind Self-Propelled Lawn Mowers Due to Fire Hazard
#22169
Jun 2022The mower can leak fuel when it is stored in the upright (vertical) storage position, posing a fire hazard.View →
MTD Recalls Craftsman and Troy-Bilt Riding Lawn Mowers Due to Crash Hazard
#22119
Apr 2022The riding mowers can fail to come to a complete stop and continue to move at a speed of about one mile per hour when the clutch/brake pedal is fully depressed, posing a low speed crash hazard.View →
SureFit Recalls Riding Lawn Mower Blade Spindle Shafts Due to Impact Hazard (Recall Alert)
#18713
Jan 2018The blade spindle shaft can break during lawn mowing and the broken blade pieces can become projectiles. This poses a risk of an impact injury to bystanders or damage to property.View →
MTD Products Recalls Cub Cadet Commercial Lawn Mowers Due to Risk of Fire (Recall Alert)
#13733
Apr 2013Fuel can leak from the vent valve grommet on top of the fuel tank during operation, posing a risk of fire.View →
MTD Recalls TrimmerPlus Edger Attachments Due to Laceration Hazard
#11252
Jun 2011The steel shaft that drives the edger blade can break during use causing the edger blade to detach. If the blade detaches, it can hit the user or bystanders, posing a laceration hazard.View →

Source: Consumer Product Safety Commission. Recall details (specific products, sale dates, remedy instructions) live on the cpsc.gov record linked from each row.

Federal contracts

No federal contracts are recorded to this specific location.

Company-wide — STANLEY BLACK & DECKER, INC. (across 106 entities)
Obligated (5-yr)
$17.8M
Obligated (all-time)
$256.2M
Awards (all-time)
21,172

Consolidated across all USAspending recipient entities under this corporate parent — not attributable to this single location.

Federal contract activity for the parent corporation. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

In the news

Part of a larger organization

MTD Products Inc. is one of 181 establishments rolled up under the parent organization STANLEY BLACK & DECKER, INC.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of STANLEY BLACK & DECKER, INC across all 181 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in lawn and garden tractor and home lawn and garden equipment manufacturing within OH, ordered by federal enforcement volume:

Other locations under this parent

Other establishments operated by STANLEY BLACK & DECKER, INC, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on MTD Products Inc. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup STANLEY BLACK & DECKER, INC, which operates 181 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is MTD Products Inc.'s OSHA violation history?
MTD Products Inc. has no OSHA inspections on record.
How does MTD Products Inc.'s safety record compare to its industry?
MTD Products Inc. operates in the lawn and garden tractor and home lawn and garden equipment manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.8. MTD Products Inc.'s self-reported DART rate is 2.37 compared to an industry average of 1.2.