Skip to main content

Establishment profile

MID-SOUTH MILLING CO., INC.

213 CENTRAL, KANSAS CITY, KS, 66118
Operated by Mid South Milling Co., Inc
311613Rendering and Meat Byproduct Processing

Download as PDF →

OSHA inspections
2
over 41 years
Violations
17
$3,600 in penalties
Penalties
$3,600
$212 avg

Summary

MID-SOUTH MILLING CO., INC. has accumulated 17 OSHA violations across 2 inspections over 41 years of recorded history, with $3,600 in total assessed penalties.

The establishment sits in the 83rd percentile for violations within its industry-state peer group of 87 employers. Inspection frequency runs at the 36th percentile. The most recent enforcement activity was recorded 19 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

MID-SOUTH MILLING CO., INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
2
0.0 / yr · last 41 yrs
Violations
17
0.4 / yr
Penalties
$3,600
$212 avg / violation
47% serious53% other
Inspection trigger · complaint
1 of 2
Inspection trigger · planned
1 of 2

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 17 distinct standards shown · 17 citations in this view · $3,600 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0147 C0111$900Apr 2007Apr 2007
29 CFR 1910.1200 E0111$675Apr 2007Apr 2007
29 CFR 1910.0305 J02 II11$675Apr 2007Apr 2007
29 CFR 1910.0178 L01 I11$675Apr 2007Apr 2007
29 CFR 1910.0037 B0211$675Apr 2007Apr 2007
29 CFR 1910.0147 C04 I11Apr 2007Apr 2007
29 CFR 1910.1200 H0111Apr 2007Apr 2007
29 CFR 1910.0157 B0211Apr 2007Apr 2007
29 CFR 1910.0157 E0211Apr 2007Apr 2007
29 CFR 1910.0147 C07 I11Apr 2007Apr 2007
29 CFR 1910.0212 A0111Dec 1984Dec 1984
29 CFR 1910.0023 C0111Dec 1984Dec 1984
29 CFR 1910.0213 H0111Dec 1984Dec 1984
29 CFR 1910.0213 H0311Dec 1984Dec 1984
29 CFR 1910.0213 H0411Dec 1984Dec 1984
29 CFR 1910.0243 C0311Dec 1984Dec 1984
29 CFR 1910.0304 F0411Dec 1984Dec 1984

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

83rd

Worse on violations than most other employers in NAICS 3116 within KS. Peer group: 87 employers. This establishment has 17 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
51st
peer median: $3,438
Inspection frequency
36th
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
38.7
vs industry
+36.2
TRIR
49.8
vs industry
+46.0

Reported for 30 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.8
BLS SOII 2024
Industry avg DART
2.5
BLS SOII 2024
Self-reported TRIR
49.8
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MID-SOUTH MILLING CO., INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
19 years ago

No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for MID-SOUTH MILLING CO., INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for MID-SOUTH MILLING CO., INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for MID-SOUTH MILLING CO., INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MID-SOUTH MILLING CO., INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for MID-SOUTH MILLING CO., INC.. Verify directly with Environmental Protection Agency

Inspection history

DateTriggerViolationsSeriousPenalty
2007-02-13Planned108$3,600
1984-11-28Complaint7$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

MID-SOUTH MILLING CO., INC. is one of 1 establishments rolled up under the parent organization Mid South Milling Co., Inc.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Mid South Milling Co., Inc across all 1 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in rendering and meat byproduct processing within KS, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on MID-SOUTH MILLING CO., INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Mid South Milling Co., Inc.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is MID-SOUTH MILLING CO., INC.'s OSHA violation history?
MID-SOUTH MILLING CO., INC. has 2 OSHA inspections on record with 17 violations and $3,600 in total penalties.
How does MID-SOUTH MILLING CO., INC.'s safety record compare to its industry?
MID-SOUTH MILLING CO., INC. operates in the rendering and meat byproduct processing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.8. MID-SOUTH MILLING CO., INC.'s self-reported DART rate is 38.74 compared to an industry average of 2.5.