Establishment profile
MARQUETTE TOOL & DIE CO.
3185 S KINGSHIGHWAY, ST. LOUIS, MO, 63139
Summary
MARQUETTE TOOL & DIE CO. has accumulated 37 OSHA violations across 7 inspections over 49 years of recorded history, with $13,383 in total assessed penalties.
The establishment sits in the 94th percentile for violations within its industry-state peer group of 50 employers. Inspection frequency runs at the 82nd percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
MARQUETTE TOOL & DIE CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $13,383 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $1,210 | Apr 1994 | Dec 2011 |
| 29 CFR 1910.0305 B01 | 2 | 2 | $908 | Apr 1994 | Feb 2004 |
| 29 CFR 1910.0145 F05 | 1 | 1 | $1,750 | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0132 D02 | 1 | 1 | $1,400 | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0217 C05 I | 1 | 1 | $1,075 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0217 B07 VD | 1 | 1 | $1,075 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $860 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0147 D | 1 | 1 | $860 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0217 B07 VA | 1 | 1 | $645 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $645 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0305 A01 I | 1 | 1 | $645 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0242 B | 1 | 1 | $645 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0334 A02 I | 1 | 1 | $645 | Apr 1994 | Apr 1994 |
| 29 CFR 1910.0134 B01 | 1 | 1 | $315 | Nov 1984 | Nov 1984 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $263 | Feb 2004 | Feb 2004 |
| 29 CFR 1910.0304 A02 | 1 | 1 | $263 | Feb 2004 | Feb 2004 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $180 | Feb 1977 | Feb 1977 |
| 29 CFR 1910.0147 C06 II | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0212 B | 1 | 1 | — | Dec 2011 | Dec 2011 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Dec 2011 | Dec 2011 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3321 within MO. Peer group: 50 employers. This establishment has 37 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 25 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for MARQUETTE TOOL & DIE CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for MARQUETTE TOOL & DIE CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for MARQUETTE TOOL & DIE CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for MARQUETTE TOOL & DIE CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for MARQUETTE TOOL & DIE CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for MARQUETTE TOOL & DIE CO.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
MARQUETTE TOOL & DIE 3185 S KINGSHIGHWAY BLVD · ST. LOUIS, MO, 63139 | AirRCRA | No Violation Identified | 0 | 0 | — | Mar 2021 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for MARQUETTE TOOL & DIE CO.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense8500490913!SEAL SECURITY METALcontract · Last action 2013-12-02$13,500
- Department of DefenseMETAL SECURITY SEAL FABRICATION COMPLETEcontract · Last action 2014-05-29$6,750
- Department of Defense8500765849!SEAL SECURITY METALcontract · Last action 2014-03-28$6,750
- Department of Defense8502675921!SEAL SECURITY METALcontract · Last action 2015-11-12$6,600
- Department of Defense8501282654!SEAL SECURITY METALcontract · Last action 2014-08-24$4,500
- Department of Defense8503422702!SEAL SECURITY METALcontract · Last action 2016-07-12$1,650
- Department of Defense8503230579!SEAL SECURITY METALcontract · Last action 2016-05-18$1,650
- Department of Defense8501614447!SEAL SECURITY METALcontract · Last action 2014-12-04$1,020
- Department of Defense8504847206!SEAL SECURITY METALcontract · Last action 2017-10-16$660
- Department of Defense8502136165!SEAL SECURITY METALcontract · Last action 2015-06-03$510
- Department of Defense8501862064!SEAL SECURITY METALcontract · Last action 2015-03-02$510
- Department of Defense8502479422!SEAL SECURITY METALcontract · Last action 2015-09-04$340
- Department of Defense4610006632!SEAL SECURITY METALcontract · Last action 2016-10-25$0
Federal contract dollars to this establishment. Primary NAICS: 332510 - HARDWARE MANUFACTURING. Last action: 2017-10-16. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-12-05 | Planned | 10 | 7 | $3,150 | |
| 2004-02-03 | Planned | 4 | 4 | $1,138 | |
| 2003-04-15 | Programmed Other | 0 | — | $0 | |
| 1994-03-31 | Planned | 13 | 11 | $8,600 | |
| 1984-09-06 | Complaint | 9 | 9 | $315 | |
| 1977-03-21 | Follow-up | 0 | — | $0 | |
| 1977-01-25 | Complaint | 1 | 1 | $180 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within MO, ordered by federal enforcement volume:
- LANDMARK MANUFACTURING CORPORATIONGALLATIN — 2 federal enforcement records
- MILBANK MANUFACTURINGCONCORDIA — 2 federal enforcement records
- MITEK INDUSTRIES, INC.COLUMBIA — 1 federal enforcement record
- DIAMOND MANUFACTURING INCKANSAS CITY — 1 federal enforcement record
- JEFFERSON METAL STAMPINGS, INC.ST. LOUIS — 1 federal enforcement record
- HAAKE MANUFACTURING COMPANYDE SOTO — 1 federal enforcement record
- W. F. NORMAN CORP.NEVADA — 1 federal enforcement record
- WATERLOO INDUSTRIES INCSEDALIA — 1 federal enforcement record
- IRONFORMLEBANON — 1 federal enforcement record
- HOFMANN TOOL COST. PETERS — 1 federal enforcement record
Related searches
- NAICS 332All employers in this industry
- Employers in MOState-wide enforcement data
- Industry in MOIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on MARQUETTE TOOL & DIE CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is MARQUETTE TOOL & DIE CO.'s OSHA violation history?
- MARQUETTE TOOL & DIE CO. has 7 OSHA inspections on record with 37 violations and $13,382.5 in total penalties.