Establishment profile
M & S MACHINING, INC.
340 CUTTER HILL CT, LEXINGTON, KY, 40509
332710 — Machine Shops
Summary
M & S MACHINING, INC. has accumulated 5 OSHA violations across 2 inspections over 25 years of recorded history, with $500 in total assessed penalties.
The establishment sits in the 62nd percentile for violations within its industry-state peer group of 240 employers. Inspection frequency runs at the 64th percentile. The most recent enforcement activity was recorded 19 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
M & S MACHINING, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 5 distinct standards shown · 5 citations in this view · $500 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0304 A02 | 1 | 1 | $375 | Sep 2006 | Sep 2006 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $125 | Sep 2000 | Sep 2000 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Sep 2006 | Sep 2006 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Sep 2006 | Sep 2006 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | Sep 2006 | Sep 2006 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3327 within KY. Peer group: 240 employers. This establishment has 5 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for M & S MACHINING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for M & S MACHINING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 19+ years. Most recent activity: 19 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for M & S MACHINING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for M & S MACHINING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for M & S MACHINING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for M & S MACHINING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for M & S MACHINING, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for M & S MACHINING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseSUPPORTcontract · Last action 2010-11-15$24,959
- Department of Homeland SecurityDOVETAIL MOUNTS USED ON THE MH-65 AIRCRAFT.contract · Last action 2016-01-27$22,536
- Department of Homeland SecurityVARIOUS SPARE PARTS UTILIZED ON H65 AIRCRAFTcontract · Last action 2017-03-15$20,829
- Department of Homeland SecuritySPARE PARTS FOR H65 AIRCRAFTcontract · Last action 2015-09-03$14,238
- Department of DefenseCABLES, D-RINGScontract · Last action 2009-02-03$12,651
- Department of Homeland SecurityCABIN SIDE STRIPS ARE USED ON THE MH-65 AIRCRAFT.contract · Last action 2016-08-23$11,528
- Department of Homeland SecurityINBOARD BUSHINGcontract · Last action 2015-08-14$10,923
- Department of Homeland SecurityVARIOUS SPARE PARTS UTILIZED ON H65 AIRCRAFTcontract · Last action 2017-03-23$10,760
- Department of Homeland SecurityVARIOUS SPARE PARTS UTILIZED ON THE H65 AIRCRAFTcontract · Last action 2016-03-07$10,685
- Department of Homeland SecurityTALON BAY ANGLES USED ON THE MH65 AIRCRAFT.contract · Last action 2015-12-28$10,154
- Department of Homeland SecuritySUPPORT CLAMPcontract · Last action 2016-07-13$9,908
- Department of Homeland SecurityINBOARD AND OUTBOARD BUSHINGcontract · Last action 2015-06-23$9,315
- Department of Homeland SecurityANGLE, TALPN BAY TO BE UTILIZED ON THE MH65 AIRCRAFTcontract · Last action 2017-10-24$8,438
- Department of Homeland SecurityANGLE,TALON BAYcontract · Last action 2017-07-19$8,438
- Department of Homeland SecurityPURCHASE OF SPARE PARTS FOR THE H65 AIRCRAFTcontract · Last action 2014-11-18$7,270
- Department of Homeland SecurityIGF::OT::IGF MANUFACTURE OF BUSHINGS FOR THE H-65 AIRCRAFT.contract · Last action 2013-09-12$7,220
- Department of Homeland SecurityHANDLE, LHcontract · Last action 2017-07-18$7,015
- Department of Homeland SecurityGPS DISCONNECT BRKTcontract · Last action 2018-03-27$6,862
- Department of Homeland SecuritySPARE PARTS FOR MH-65 AIRCRAFT.contract · Last action 2016-09-09$5,180
- Department of Homeland SecuritySPARE PARTS FOR MH65 AIRCRAFTcontract · Last action 2016-09-07$4,185
- Department of DefenseCABLEcontract · Last action 2008-03-06$3,675
- Department of Homeland SecurityNYLATRHON SHEETcontract · Last action 2010-12-09$206
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2018-03-27. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-09-08 | Planned | 4 | 1 | $375 | |
| 2000-09-07 | Planned | 1 | 1 | $125 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within KY, ordered by federal enforcement volume:
- VERMONT THREAD GAGE, LLCFRANKLIN — 3 federal enforcement records
- QUALITY MANUFACTURING CO., INC.WINCHESTER — 2 federal enforcement records
- PRECISION MACHINE, INC.PADUCAH — 2 federal enforcement records
- MID-AMERICA MACHINE INCMAYFIELD — 2 federal enforcement records
- PROVIDENCE MACHINE, INC.PROVIDENCE — 2 federal enforcement records
- ATLAS MACHINE AND SUPPLY COMPANY INCPLEASURE RIDGE PARK — 2 federal enforcement records
- TOOLCO INCOWENSBORO — 1 federal enforcement record
- A A MACHINE, INC.BARDSTOWN — 1 federal enforcement record
- ROGERS TOOL AND MANUFACTURING, INC.CLAY CITY — 1 federal enforcement record
- HODGENVILLE MACHINE - TOOL LLCWHITE CITY — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in KYState-wide enforcement data
- Machine Shops in KYIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on M & S MACHINING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is M & S MACHINING, INC.'s OSHA violation history?
- M & S MACHINING, INC. has 2 OSHA inspections on record with 5 violations and $500 in total penalties.
- How does M & S MACHINING, INC.'s safety record compare to its industry?
- M & S MACHINING, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.