Skip to main content

Establishment profile

ATLAS MACHINE AND SUPPLY COMPANY INC

7000 GLOBAL DRIVE, PLEASURE RIDGE PARK, KY, 40258
332710Machine Shops
EIN 610122980

Download as PDF →

OSHA inspections
3
over 23 years
Violations
4
$7,000 in penalties
Penalties
$7,000
$1,750 avg
Violations across 2 federal agencies
Enforcement actions from multiple agencies may indicate systemic compliance issues across functions.

Summary

ATLAS MACHINE AND SUPPLY COMPANY INC has accumulated 4 OSHA violations across 3 inspections over 23 years of recorded history, with $7,000 in total assessed penalties.

The establishment sits in the 59th percentile for violations within its industry-state peer group of 240 employers. Inspection frequency runs at the 79th percentile. The most recent enforcement activity was recorded 1 year ago.

Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ATLAS MACHINE AND SUPPLY COMPANY INC appears in OSHA workplace safety, WHD wage enforcement, EPA environmental compliance, OFLC visa and labor certification (historical), and FMCSA motor carrier registration records only. No matching records were found in MSHA mine safety, NLRB labor relations, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
3
0.1 / yr · last 23 yrs
Violations
4
0.2 / yr
Penalties
$7,000
$1,750 avg / violation
50% serious50% other
Inspection trigger · planned
2 of 3
Inspection trigger · complaint
1 of 3

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 4 distinct standards shown · 4 citations in this view · $7,000 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
338.31(1)(A)11$7,000Feb 2025Feb 2025
29 CFR 1910.0184 E0111Feb 2025Feb 2025
29 CFR 1910.0022 D0111Aug 2009Aug 2009
29 CFR 1910.0215 B0911Feb 2003Feb 2003

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

59th

Above average violations in NAICS 3327 within KY. Peer group: 240 employers. This establishment has 4 OSHA violations; peer median is 2.

Fewer violationsMore violations
Penalty percentile
92nd
peer median: $0
Inspection frequency
79th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
1.7
vs industry
+0.2
TRIR
2.1
vs industry
−0.6

Reported for 217 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
2.7
BLS SOII 2024
Industry avg DART
1.5
BLS SOII 2024
Self-reported TRIR
2.1
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
2
Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ATLAS MACHINE AND SUPPLY COMPANY INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
1 year ago

Most recent federal enforcement activity recorded 1 year ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

Cases
1
Back wages owed
$0

Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.

Wage and hour breakdown by law

Per-statute totals across all closed DOL Wage & Hour cases against this employer. Backwages reflect amounts the agency assessed; civil penalty is the separate fine where applicable. Some acts (Davis-Bacon, SCA, CWHSSA, H-2B, CCPA) don't carry a civil penalty field in DOL's data. 1 statute · 184 violations · $0 in backwages

StatutePeriodCasesViolationsWorkersBackwagesCivil penalty
FMLA (family & medical leave)Jun 20111184

Source: DOL WHD enforcement database, aggregated per statute. Lifetime totals. A case can cite multiple statutes — so the total here may exceed the case count in the table above.

Wage and hour cases

Closed DOL Wage & Hour Division cases (FLSA, FMLA, H-2B, MSPA, and related statutes). Backwages reflect amounts the agency assessed; civil penalty (CMP) is a separate fine levied on top, where the statute provides for one (FLSA / H-1B / H-2A / MSPA / FMLA / EPPA / FLSA Child Labor; other acts have no CMP column in DOL’s data). The Statutes column lists which laws each case cited. 1 case · 184 violations · $0 in backwages

Case periodIndustryStatutesViolationsWorkersBackwagesCivil penalty
Jun 2009 – Jun 2011Machine ShopsFMLA1840

Source: DOL WHD enforcement database. Cases shown reflect those the agency has closed and made public. A violation count is the agency’s tally of cited violations (one violation can affect many workers); the workers column counts distinct employees the agency found to be affected.

Mine safety (MSHA)

No MSHA mine safety violations on file for ATLAS MACHINE AND SUPPLY COMPANY INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ATLAS MACHINE AND SUPPLY COMPANY INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

Total applications
1
Certified
0
Denied
1
Avg wage ratio
1.01x
E-3 Australian

Office of Foreign Labor Certification — labor condition applications for H-1B, H-2A, H-2B visa programs. Wage ratio = offered / prevailing wage. Historical data only: DOL ended OFLC Performance Data Disclosure publication in 2026, so the figures above reflect filings through the last ingested cycle and are not being refreshed. Treat as a historical snapshot, not a current signal.

Environmental compliance (EPA)

EPA inspections
3
Quarters non-compliant
0

EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.

EPA-registered facilities

Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.

FacilityPermitsStatusInspectionsFormal actionsPenaltiesLast inspectedECHO
ATLAS MACHINE & SUPPLY INC
7000 GLOBAL DR · LOUISVILLE, KY, 40258
WaterRCRANo Violation Identified30Oct 2025View →

Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.

Motor carrier safety (FMCSA)

DOT number
367290
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ATLAS MACHINE AND SUPPLY COMPANY INC. Verify directly with UVA Corporate Prosecution Registry

Federal contracts

This location

Obligated (5-yr)
$1.3M
Obligated (all-time)
$1.7M
Awards
27
Top agency
Department of Defense
$1.7M
Top agencies by obligation (this location)
Department of Defense$1.7M
Department of Veterans Affairs$3K
Largest awards
  • Department of Defense
    THE CONTRACTOR SHALL PROVIDE ALL LABOR, EQUIPMENT, AND MATERIALS TO PERFORM ALL OPERATIONS NECESSARY TO FURNISH NEW SHEAVES FOR BOTH UPSTREAM AND DOWNSTREAM EMERGENCY GATESOF THE AUXILIARY LOCK CHAMBER AT CANNELTON LOCK AND DAM.
    contract · Last action 2025-12-23
    $571,428
  • Department of Defense
    BULKHEAD HARDWARE AND PARTS
    contract · Last action 2023-09-21
    $200,873
  • Department of Defense
    MARKLAND MACHINERY COMPONENTS - SUPPLY
    contract · Last action 2025-09-12
    $137,375
  • Department of Defense
    PINTLE SOCKET CASTING
    contract · Last action 2009-01-14
    $114,592
  • Department of Defense
    PINTLE BALL REFURBISH FOR JT MYERS L&D SEED TO
    contract · Last action 2023-05-05
    $100,353
  • Department of Defense
    SHEAVE PINS FOR CANNELTON
    contract · Last action 2024-02-26
    $97,730
  • Department of Defense
    REFURBISH MARKLAND PINTLE BALL
    contract · Last action 2024-06-03
    $86,044
  • Department of Defense
    CAESAR CREEK DEBRIS SCREENS
    contract · Last action 2024-01-03
    $82,669
  • Department of Defense
    SUPPLY OF TWO (2) REBUILT HYDRAULIC CYLINDERS FOR MARKLAND L&D
    contract · Last action 2012-01-05
    $82,018
  • Department of Defense
    GATE CYLINDER
    contract · Last action 2010-01-29
    $76,644
  • Department of Defense
    MILL&STRAIGHTEN QUOIN BLOCKS - LRS
    contract · Last action 2011-11-09
    $46,475
  • Department of Defense
    MARKLAND QUOIN BLOCKS - AWARD TO MILL AND STRAIGHTEN QUOIN BLOCKS AT MARKLAND LOCKS AND DAM, WARSAW, KY
    contract · Last action 2012-06-06
    $23,525
  • Department of Defense
    PINTLE CASTING REPAIRS AT THE LOUISVILLE REPAIR STATION, KY
    contract · Last action 2010-02-03
    $22,122
  • Department of Defense
    PAD EYES
    contract · Last action 2009-10-15
    $20,318
  • Department of Defense
    STRAIGHTEN AND MILL QUOIN BLOCKS - LRS
    contract · Last action 2011-10-05
    $20,266
  • Department of Defense
    COMPRESSOR FOR NEWBURGH LOCKS AND DAM --TO PURCHASE AND INSTALL A NEW AIR COMPRESSOR FOR THE SECOND FLOOR OF THE OPERATIONS BLDG AT NEWBURGH L&D, NEWBURGH, IN
    contract · Last action 2012-09-18
    $17,572
  • Department of Defense
    IGF::OT::IGF ON-SITE PRECISION MACHINING SERVICES TO REMOVE CORROSION AND MAKE REPAIRS TO HARRY S. TRUMAN POWER PLANT TURBINE UNIT #6 MAIN SHAFT FLANGE, USED FOR POWER GENERATION.
    contract · Last action 2013-03-15
    $17,040
  • Department of Defense
    REHAB MOORING BITS
    contract · Last action 2009-09-01
    $7,340
  • Department of Defense
    4508355768!VALVE,SOL
    contract · Last action 2008-08-14
    $5,806
  • Department of Defense
    BARNES SUBMERSIBLE PUMP
    contract · Last action 2009-01-15
    $5,119
  • Department of Veterans Affairs
    SMALL PURCHASE DATA
    contract · Last action 2008-08-27
    $2,490
  • Department of Veterans Affairs
    ALL MATERIAL AND LABOR TO WELD PLATE TO I-BEAM AND
    contract · Last action 2007-11-07
    $716
  • Department of Defense
    OPERATIONS MACHINE/FABRICATION MULTIPLE AWARD TASK ORDER CONTRACT
    contract · Last action 2025-06-03
    $0
  • Department of Defense
    REFURBISH SECTOR GEAR ASSEMBLIES
    contract · Last action 2025-05-12
    $0
  • Department of Defense
    STEEL FABRICATION MATOC
    contract · Last action 2012-10-11
    $0
  • Department of Defense
    PIPE CLAMP PLATE
    contract · Last action 2008-05-27
    $0
  • Department of Defense
    FENDER SUPPORT ANGLES
    contract · Last action 2008-01-31
    $-63

Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2025-12-23. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.

Inspection history

DateTriggerViolationsSeriousPenalty
2024-09-05Complaint22$7,000
2009-07-10Planned1$0
2002-12-04Planned1$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in machine shops within KY, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ATLAS MACHINE AND SUPPLY COMPANY INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ATLAS MACHINE AND SUPPLY COMPANY INC's OSHA violation history?
ATLAS MACHINE AND SUPPLY COMPANY INC has 3 OSHA inspections on record with 4 violations and $7,000 in total penalties.
How does ATLAS MACHINE AND SUPPLY COMPANY INC's safety record compare to its industry?
ATLAS MACHINE AND SUPPLY COMPANY INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. ATLAS MACHINE AND SUPPLY COMPANY INC's self-reported DART rate is 1.68 compared to an industry average of 1.5.