Skip to main content

Establishment profile

KEN'S WELDING, INC

118 SOUTH HIGH SCHOOL AVE, COLUMBIA, MS, 39429
811310Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Download as PDF →

OSHA inspections
1
over 14 years
Violations
10
$3,600 in penalties
Penalties
$3,600
$360 avg
Accident investigations on record
1 National Emphasis Program inspections

Summary

KEN'S WELDING, INC has accumulated 10 OSHA violations across 1 inspection over 14 years of recorded history, with $3,600 in total assessed penalties.

The establishment sits in the 97th percentile for violations within its industry-state peer group of 36 employers. The most recent enforcement activity was recorded 14 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

KEN'S WELDING, INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
1
0.1 / yr · last 14 yrs
Violations
10
0.7 / yr
Penalties
$3,600
$360 avg / violation
90% serious10% other
Inspection trigger · planned
1 of 1

100% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $3,600 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
5A000111$400Oct 2011Oct 2011
29 CFR 1910.0212 A0511$400Oct 2011Oct 2011
29 CFR 1910.0219 D0111$400Oct 2011Oct 2011
29 CFR 1910.0243 C0111$400Oct 2011Oct 2011
29 CFR 1910.0253 B04 III11$400Oct 2011Oct 2011
29 CFR 1910.0303 F0111$400Oct 2011Oct 2011
29 CFR 1910.0303 G02 I11$400Oct 2011Oct 2011
29 CFR 1910.0305 B0211$400Oct 2011Oct 2011
29 CFR 1910.0141 D02 II11$400Oct 2011Oct 2011
29 CFR 1910.1200 E0111Oct 2011Oct 2011

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

97th

Worse on violations than nearly every other employer in NAICS 8113 within MS. Peer group: 36 employers. This establishment has 10 OSHA violations; peer median is 1.

Fewer violationsMore violations
Penalty percentile
71st
peer median: $188
Inspection frequency
0th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for KEN'S WELDING, INC. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
2.4
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for KEN'S WELDING, INC. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
14 years ago

No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for KEN'S WELDING, INC. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for KEN'S WELDING, INC. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for KEN'S WELDING, INC. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for KEN'S WELDING, INC. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for KEN'S WELDING, INC. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for KEN'S WELDING, INC. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2011-08-31Planned109$3,600

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance within MS, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on KEN'S WELDING, INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is KEN'S WELDING, INC's OSHA violation history?
KEN'S WELDING, INC has 1 OSHA inspection on record with 10 violations and $3,600 in total penalties.
How does KEN'S WELDING, INC's safety record compare to its industry?
KEN'S WELDING, INC operates in the commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance industry. The industry average Total Recordable Incident Rate (TRIR) is 2.4.