Establishment profile
JH SEMP AND SONS MACHINING, INC.
790 N. 9TH AVE., BRIGHTON, CO, 80603
Operated by JH Semp and Sons Machining Inc · 1 of 2 establishments
332710 — Machine Shops
EIN 841116971
Summary
JH SEMP AND SONS MACHINING, INC. has accumulated 15 OSHA violations across 2 inspections over 16 years of recorded history, with $6,769 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 105 employers. Inspection frequency runs at the 65th percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
JH SEMP AND SONS MACHINING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 15 citations in this view · $6,769 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $1,805 | May 2010 | Feb 2013 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,750 | May 2010 | May 2010 |
| 29 CFR 1910.0179 J02 IV | 1 | 1 | $700 | May 2010 | May 2010 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $663 | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0303 B01 | 1 | 1 | $663 | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0242 B | 1 | 1 | $663 | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0038 A01 | 1 | 1 | $525 | May 2010 | May 2010 |
| 29 CFR 1910.1200 F05 | 1 | 1 | — | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0110 F02 II | 1 | 1 | — | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0303 G01 | 1 | 1 | — | Feb 2013 | Feb 2013 |
| 29 CFR 1910.0179 J02 III | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.0147 F02 I | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.0132 D01 | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.0179 J03 | 1 | 1 | — | May 2010 | May 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within CO. Peer group: 105 employers. This establishment has 15 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 11 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for JH SEMP AND SONS MACHINING, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for JH SEMP AND SONS MACHINING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for JH SEMP AND SONS MACHINING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for JH SEMP AND SONS MACHINING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for JH SEMP AND SONS MACHINING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for JH SEMP AND SONS MACHINING, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for JH SEMP AND SONS MACHINING, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2012-08-23 | Complaint | 7 | 2 | $3,094 | |
| 2010-05-03 | Complaint | 8 | 7 | $3,675 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
JH SEMP AND SONS MACHINING, INC. is one of 2 establishments rolled up under the parent organization JH Semp and Sons Machining Inc.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of JH Semp and Sons Machining Inc across all 2 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in machine shops within CO, ordered by federal enforcement volume:
- MICRO METALS, INC.COLORADO SPRINGS — 3 federal enforcement records
- DENVER MACHINE SHOP, INC.HENDERSON — 2 federal enforcement records
- SUPERIOR METAL PRODUCTS, INC.LOUVIERS — 1 federal enforcement record
- NORTHWEST MACHINE WORKS INCGRAND JUNCTION — 1 federal enforcement record
- G2K CORP. D/B/A/ GBCLAKEWOOD — 1 federal enforcement record
- G2K CORP. D/B/A/ GBCLAKEWOOD — 1 federal enforcement record
- PRIMUS METALS INC.LAKEWOOD — 1 federal enforcement record
- STEEN MACHINING, INC.WESTMINSTER — 1 federal enforcement record
- BRATEK ENGINEERING & MANUFACTURINGDENVER — 1 federal enforcement record
- STACY MACHINE & TOOLING, INC.BROOMFIELD — 1 federal enforcement record
Related searches
- All JH Semp and Sons Machining Inc locationsParent rollup
- Machine ShopsAll employers in this industry
- Employers in COState-wide enforcement data
- Machine Shops in COIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on JH SEMP AND SONS MACHINING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup JH Semp and Sons Machining Inc, which operates 2 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is JH SEMP AND SONS MACHINING, INC.'s OSHA violation history?
- JH SEMP AND SONS MACHINING, INC. has 2 OSHA inspections on record with 15 violations and $6,769 in total penalties.
- How does JH SEMP AND SONS MACHINING, INC.'s safety record compare to its industry?
- JH SEMP AND SONS MACHINING, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. JH SEMP AND SONS MACHINING, INC.'s self-reported DART rate is 0 compared to an industry average of 1.5.