Skip to main content

Establishment profile

JENINGA BROTHERS METAL FORMING, INC.

1061 PROCTER DRIVE, ELKHORN, WI, 53121
332618Other Fabricated Wire Product Manufacturing

Download as PDF →

OSHA inspections
3
over 17 years
Violations
9
$3,000 in penalties
Penalties
$3,000
$333 avg
Accident investigations on record
3 National Emphasis Program inspections · 1 OSHA follow-up

Summary

JENINGA BROTHERS METAL FORMING, INC. has accumulated 9 OSHA violations across 3 inspections over 17 years of recorded history, with $3,000 in total assessed penalties.

The establishment sits in the 57th percentile for violations within its industry-state peer group of 45 employers. Inspection frequency runs at the 55th percentile. The most recent enforcement activity was recorded 17 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

JENINGA BROTHERS METAL FORMING, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
3
0.2 / yr · last 17 yrs
Violations
9
0.5 / yr
Penalties
$3,000
$333 avg / violation
78% serious22% other
Inspection trigger · referral
1 of 3
Inspection trigger · planned
1 of 3

33% of inspections at this establishment produced violations,

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 9 distinct standards shown · 9 citations in this view · $3,000 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1910.0147 C04 I11$2,000Oct 2008Oct 2008
29 CFR 1910.0217 C03 IB11$500Oct 2008Oct 2008
29 CFR 1910.0335 A01 I11$250Oct 2008Oct 2008
29 CFR 1910.0212 A0111$250Oct 2008Oct 2008
29 CFR 1910.0147 D0211Oct 2008Oct 2008
29 CFR 1910.0147 D0311Oct 2008Oct 2008
29 CFR 1910.0305 B0111Oct 2008Oct 2008
29 CFR 1910.0305 G02 III11Oct 2008Oct 2008
29 CFR 1910.0147 D04 I11Oct 2008Oct 2008

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

57th

Above average violations in NAICS 3326 within WI. Peer group: 45 employers. This establishment has 9 OSHA violations; peer median is 7.

Fewer violationsMore violations
Penalty percentile
36th
peer median: $6,005
Inspection frequency
55th
peer median: 2

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with OSHA Injury Tracking Application

Industry benchmark

Industry avg TRIR
3.2
BLS SOII 2024
Industry avg DART
1.8
BLS SOII 2024
Self-reported TRIR
Not in OSHA ITA

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
1
Referral
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
17 years ago

No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for JENINGA BROTHERS METAL FORMING, INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2009-01-08Follow-up0$0
2008-08-11Referral97$3,000
2008-07-29Planned0$0

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in other fabricated wire product manufacturing within WI, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on JENINGA BROTHERS METAL FORMING, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is JENINGA BROTHERS METAL FORMING, INC.'s OSHA violation history?
JENINGA BROTHERS METAL FORMING, INC. has 3 OSHA inspections on record with 9 violations and $3,000 in total penalties.
How does JENINGA BROTHERS METAL FORMING, INC.'s safety record compare to its industry?
JENINGA BROTHERS METAL FORMING, INC. operates in the other fabricated wire product manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.2.