Establishment profile
HORIZONTAL MACHINING & MANUFACTURING, INC.
640 ARIZONA AVENUE NW, HURON, SD, 57350
333515 — Cutting Tool and Machine Tool Accessory Manufacturing
Summary
HORIZONTAL MACHINING & MANUFACTURING, INC. has accumulated 16 OSHA violations across 3 inspections over 18 years of recorded history, with $13,525 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 11 employers. Inspection frequency runs at the 80th percentile. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HORIZONTAL MACHINING & MANUFACTURING, INC. appears in OSHA workplace safety, EPA environmental compliance, and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 16 citations in this view · $13,525 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 3 | 3 | $4,950 | Mar 2008 | May 2018 |
| 5A0001 | 1 | 1 | $4,900 | Apr 2014 | Apr 2014 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $2,100 | Apr 2014 | Apr 2014 |
| 29 CFR 1910.0095 I02 IIA | 1 | 1 | $350 | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0106 E06 II | 1 | 1 | $350 | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0132 F01 | 1 | 1 | $350 | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $263 | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0134 F01 | 1 | 1 | $263 | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0303 G01 | 1 | 1 | — | Apr 2014 | Apr 2014 |
| 29 CFR 1910.1200 F05 | 1 | 1 | — | Apr 2014 | Apr 2014 |
| 29 CFR 1910.0133 A05 | 1 | 1 | — | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0303 B07 IV | 1 | 1 | — | Mar 2008 | Mar 2008 |
| 29 CFR 1910.0146 C02 | 1 | 1 | — | Mar 2008 | Mar 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within SD. Peer group: 11 employers. This establishment has 16 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for HORIZONTAL MACHINING & MANUFACTURING, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · May 2025
Most frequent event: Struck by running powered equipment irregular movement, kick back
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| May 15, 2025 | Struck by running powered equipment irregular movement, kick back | Thigh(s) | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HORIZONTAL MACHINING & MANUFACTURING, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HORIZONTAL MACHINING & MANUFACTURING, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HORIZONTAL MACHINING & MANUFACTURING, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for HORIZONTAL MACHINING & MANUFACTURING, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
EPA Enforcement and Compliance History — Clean Air Act, Clean Water Act, RCRA, Safe Drinking Water Act. Status: No Violation Identified.
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
HORIZONTAL MACHINING & MANUFACTURING, INC 640 ARIZONA NW · HURON, SD, 57350 | RCRA | No Violation Identified | 1 | 0 | — | Jun 2025 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-03-29 | Planned | 1 | — | $4,600 | |
| 2013-12-17 | Planned | 5 | 4 | $7,000 | |
| 2008-03-04 | Planned | 10 | 9 | $1,925 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in cutting tool and machine tool accessory manufacturing within SD, ordered by federal enforcement volume:
- ALVORD-POLK, INC.LAKE PRESTON — 1 federal enforcement record
Related searches
- Cutting Tool and Machine Tool Accessory ManufacturingAll employers in this industry
- Employers in SDState-wide enforcement data
- Cutting Tool and in SDIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on HORIZONTAL MACHINING & MANUFACTURING, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is HORIZONTAL MACHINING & MANUFACTURING, INC.'s OSHA violation history?
- HORIZONTAL MACHINING & MANUFACTURING, INC. has 3 OSHA inspections on record with 16 violations and $13,525 in total penalties.
- How does HORIZONTAL MACHINING & MANUFACTURING, INC.'s safety record compare to its industry?
- HORIZONTAL MACHINING & MANUFACTURING, INC. operates in the cutting tool and machine tool accessory manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 1.2.