Establishment profile
HART TOOL & MANUFACTURING CORPORATION
5280 HIGHWAY 9, INMAN, SC, 29349
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
HART TOOL & MANUFACTURING CORPORATION has accumulated 24 OSHA violations across 8 inspections over 41 years of recorded history, with $1,575 in total assessed penalties.
The establishment sits in the 95th percentile for violations within its industry-state peer group of 147 employers. Inspection frequency runs at the 97th percentile. The most recent enforcement activity was recorded 20 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
HART TOOL & MANUFACTURING CORPORATION appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
63% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $1,575 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.1200 H | 2 | 2 | — | Jun 1988 | Jan 1991 |
| 29 CFR 1910.1200 E01 I | 2 | 2 | — | Jun 1988 | Jan 1991 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $525 | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $300 | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0037 Q01 | 1 | 1 | $300 | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0023 A10 | 1 | 1 | $225 | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0036 B04 | 1 | 1 | $225 | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0157 E01 | 1 | 1 | — | Jul 2003 | Jul 2003 |
| 29 CFR 1910.0037 K01 | 1 | 1 | — | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0157 C04 | 1 | 1 | — | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0305 B01 | 1 | 1 | — | Dec 2001 | Dec 2001 |
| 29 CFR 1910.0095 I03 | 1 | 1 | — | Oct 1995 | Oct 1995 |
| 29 CFR 1910.0095 D01 | 1 | 1 | — | Oct 1995 | Oct 1995 |
| 29 CFR 1910.0095 I02 | 1 | 1 | — | Oct 1995 | Oct 1995 |
| 29 CFR 1910.0095 L01 | 1 | 1 | — | Oct 1995 | Oct 1995 |
| 29 CFR 1910.0095 I04 | 1 | 1 | — | Oct 1995 | Oct 1995 |
| 29 CFR 1910.0095 G01 | 1 | 1 | — | Oct 1995 | Oct 1995 |
| 29 CFR 1910.0141 A03 I | 1 | 1 | — | Jan 1991 | Jan 1991 |
| 29 CFR 1910.0141 D02 IV | 1 | 1 | — | Jan 1991 | Jan 1991 |
| 29 CFR 1910.0141 D02 III | 1 | 1 | — | Jan 1991 | Jan 1991 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within SC. Peer group: 147 employers. This establishment has 24 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for HART TOOL & MANUFACTURING CORPORATION. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for HART TOOL & MANUFACTURING CORPORATION. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 20+ years. Most recent activity: 20 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for HART TOOL & MANUFACTURING CORPORATION. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for HART TOOL & MANUFACTURING CORPORATION. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for HART TOOL & MANUFACTURING CORPORATION. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for HART TOOL & MANUFACTURING CORPORATION. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for HART TOOL & MANUFACTURING CORPORATION. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for HART TOOL & MANUFACTURING CORPORATION. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2006-01-11 | Planned | 0 | — | $0 | |
| 2003-07-10 | Planned | 1 | — | $0 | |
| 2001-11-14 | Planned | 8 | 6 | $1,575 | |
| 1997-10-08 | Planned | 0 | — | $0 | |
| 1995-08-29 | Planned | 6 | 1 | $0 | |
| 1990-11-02 | Planned | 5 | — | $0 | |
| 1988-03-31 | Planned | 4 | — | $0 | |
| 1985-04-10 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within SC, ordered by federal enforcement volume:
- BLUE RIDGE TOOL & MACHINE CO., INC.EASLEY — 2 federal enforcement records
- WHITMAN MOLD, INC.COPE — 2 federal enforcement records
- ZELTWAGNER LPNORTH CHARLESTON — 1 federal enforcement record
- USA CARBIDE TOOLING, INC.SPARTANBURG — 1 federal enforcement record
- MIDLANDS TOOLING SYSTEMLUGOFF — 1 federal enforcement record
- JACO MACHINE & TOOL, INC.SPARTANBURG — 1 federal enforcement record
- SUPREME TOOL & DIE, INC.GREER — 1 federal enforcement record
- SENECA MACHINING, INC.SENECA — 1 federal enforcement record
- DRT POWER SYSTEMS - HOVISSIMPSONVILLE — 1 federal enforcement record
- UNITED TOOL AND MOLD, INC.EASLEY — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in SCState-wide enforcement data
- Special Die and in SCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on HART TOOL & MANUFACTURING CORPORATION from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is HART TOOL & MANUFACTURING CORPORATION's OSHA violation history?
- HART TOOL & MANUFACTURING CORPORATION has 8 OSHA inspections on record with 24 violations and $1,575 in total penalties.
- How does HART TOOL & MANUFACTURING CORPORATION's safety record compare to its industry?
- HART TOOL & MANUFACTURING CORPORATION operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.