Establishment profile
GRAHAM DYEING & FINISHING MILL
240 HAWKINS STREET, BURLINGTON, NC, 27217
Summary
GRAHAM DYEING & FINISHING MILL has accumulated 24 OSHA violations across 2 inspections over 28 years of recorded history, with $3,850 in total assessed penalties.
The establishment sits in the 98th percentile for violations within its industry-state peer group of 56,722 employers. Inspection frequency runs at the 84th percentile. The most recent enforcement activity was recorded 24 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GRAHAM DYEING & FINISHING MILL appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $3,850 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 7F0102 | 2 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $1,050 | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0262 Y01 II | 1 | 1 | $750 | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $525 | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0304 F04 | 1 | 1 | $525 | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $525 | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $375 | Mar 1998 | Mar 1998 |
| 29 CFR 1904.0017 B | 1 | 1 | $100 | Feb 2002 | Feb 2002 |
| 29 CFR 1910.0219 E01 I | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0262 Y01 III | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0303 B02 | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0303 F | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0304 E01 IV | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0305 G02 II | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0023 D01 IV | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0334 A02 I | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0038 A01 | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0023 D01 III | 1 | 1 | — | Mar 1998 | Mar 1998 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | Mar 1998 | Mar 1998 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 56,722 employers. This establishment has 24 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GRAHAM DYEING & FINISHING MILL. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GRAHAM DYEING & FINISHING MILL. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 24+ years. Most recent activity: 24 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GRAHAM DYEING & FINISHING MILL. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GRAHAM DYEING & FINISHING MILL. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GRAHAM DYEING & FINISHING MILL. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GRAHAM DYEING & FINISHING MILL. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GRAHAM DYEING & FINISHING MILL. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GRAHAM DYEING & FINISHING MILL. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2002-01-22 | Other | 1 | — | $100 | |
| 1998-01-13 | Planned | 23 | 9 | $3,750 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in NCState-wide enforcement data
About this data
This profile aggregates federal enforcement records on GRAHAM DYEING & FINISHING MILL from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GRAHAM DYEING & FINISHING MILL's OSHA violation history?
- GRAHAM DYEING & FINISHING MILL has 2 OSHA inspections on record with 24 violations and $3,850 in total penalties.