Establishment profile
GILT EDGE FLOUR MILLS
1090 W 1200 N, RICHMOND, UT, 84333
311211 — Flour Milling
Summary
GILT EDGE FLOUR MILLS has accumulated 37 OSHA violations across 7 inspections over 40 years of recorded history, with $7,050 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 18 employers. Inspection frequency runs at the 94th percentile. The most recent enforcement activity was recorded 18 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GILT EDGE FLOUR MILLS appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
86% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 25 citations in this view · $7,050 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 C01 | 3 | 3 | $2,600 | Mar 1999 | Nov 2007 |
| 29 CFR 1910.0219 E03 I | 2 | 2 | $1,375 | May 1994 | Mar 1999 |
| 29 CFR 1910.0095 B01 | 2 | 2 | $975 | Mar 1999 | Jan 2006 |
| 29 CFR 1910.0023 C01 | 2 | 2 | $500 | May 1994 | Mar 1999 |
| 29 CFR 1910.0025 D02 XII | 1 | 1 | $500 | May 1994 | May 1994 |
| 29 CFR 1910.0219 C05 | 1 | 1 | $500 | May 1994 | May 1994 |
| 29 CFR 1000.5 C02 | 1 | 1 | $200 | Jan 2006 | Jan 2006 |
| 29 CFR 1000.5 C06 | 1 | 1 | $200 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0215 A01 | 1 | 1 | $100 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0219 C02 I | 1 | 1 | $100 | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0147 C04 II | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0147 C07 IIIB | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 1910.0095 C01 | 1 | 1 | — | Mar 1999 | Mar 1999 |
| 29 CFR 1910.0134 C01 | 1 | 1 | — | Mar 1999 | Mar 1999 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | May 1994 | May 1994 |
| 29 CFR 1010.0040401 | 1 | 1 | — | May 1994 | May 1994 |
| 29 CFR 1910.0023 A09 | 1 | 1 | — | May 1994 | May 1994 |
| 29 CFR 1910.0024 F | 1 | 1 | — | May 1994 | May 1994 |
| 29 CFR 1910.0027 C06 | 1 | 1 | — | May 1994 | May 1994 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3112 within UT. Peer group: 18 employers. This establishment has 37 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GILT EDGE FLOUR MILLS. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GILT EDGE FLOUR MILLS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GILT EDGE FLOUR MILLS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GILT EDGE FLOUR MILLS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GILT EDGE FLOUR MILLS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GILT EDGE FLOUR MILLS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GILT EDGE FLOUR MILLS. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GILT EDGE FLOUR MILLS. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2007-11-13 | Accident | 1 | — | $2,000 | |
| 2005-11-30 | Accident | 5 | 3 | $1,000 | |
| 2005-11-30 | Planned | 4 | 4 | $300 | |
| 1999-02-17 | Planned | 6 | 3 | $1,750 | |
| 1994-06-21 | Follow-up | 0 | — | $0 | |
| 1994-05-18 | Planned | 15 | 5 | $2,000 | |
| 1985-07-11 | Planned | 6 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in flour milling within UT, ordered by federal enforcement volume:
- GRAIN CRAFT, INC.OGDEN — 2 federal enforcement records
- LEHI ROLLER MILLS LLCLEHI — 2 federal enforcement records
- CEREAL FOODS PROCESSORSSALT LAKE CITY — 1 federal enforcement record
- BIG J MILLING & ELEVATOR COBRIGHAM CITY — 1 federal enforcement record
- CEREAL FOOD PROCESSORS INCOGDEN — 1 federal enforcement record
- CENTRAL MILLING HOLDINGS INCRICHMOND — 1 federal enforcement record
Related searches
- Flour MillingAll employers in this industry
- Employers in UTState-wide enforcement data
- Flour Milling in UTIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GILT EDGE FLOUR MILLS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GILT EDGE FLOUR MILLS's OSHA violation history?
- GILT EDGE FLOUR MILLS has 7 OSHA inspections on record with 37 violations and $7,050 in total penalties.
- How does GILT EDGE FLOUR MILLS's safety record compare to its industry?
- GILT EDGE FLOUR MILLS operates in the flour milling industry. The industry average Total Recordable Incident Rate (TRIR) is 3.1.