Establishment profile
FAULL & SON TOOL & DIE CO.
515 HOLFORD ST., NILES, OH, 44446
332510 — Hardware Manufacturing
Summary
FAULL & SON TOOL & DIE CO. has accumulated 25 OSHA violations across 2 inspections over 36 years of recorded history, with $2,010 in total assessed penalties.
The establishment sits in the 88th percentile for violations within its industry-state peer group of 41 employers. Inspection frequency runs at the 38th percentile. The most recent enforcement activity was recorded 17 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
FAULL & SON TOOL & DIE CO. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 23 citations in this view · $2,010 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0217 E01 I | 3 | 2 | — | Oct 1989 | Oct 2008 |
| 29 CFR 1910.0217 C01 I | 2 | 2 | $320 | Oct 1989 | Oct 2008 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $450 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0217 D09 I | 1 | 1 | $250 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $250 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $250 | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0110 E04 III | 1 | 1 | $70 | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0217 B04 I | 1 | 1 | $70 | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $70 | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0305 B02 | 1 | 1 | $70 | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0178 P01 | 1 | 1 | $70 | Oct 1989 | Oct 1989 |
| 29 CFR 1910.1200 H | 1 | 1 | $70 | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0219 B01 | 1 | 1 | $70 | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0037 B02 | 1 | 1 | — | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0022 D01 | 1 | 1 | — | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Oct 2008 | Oct 2008 |
| 29 CFR 1910.0217 B07 VA | 1 | 1 | — | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0217 B04 II | 1 | 1 | — | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0217 B07 II | 1 | 1 | — | Oct 1989 | Oct 1989 |
| 29 CFR 1910.0020 G02 | 1 | 1 | — | Oct 1989 | Oct 1989 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3325 within OH. Peer group: 41 employers. This establishment has 25 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for FAULL & SON TOOL & DIE CO.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for FAULL & SON TOOL & DIE CO.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 17+ years. Most recent activity: 17 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for FAULL & SON TOOL & DIE CO.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for FAULL & SON TOOL & DIE CO.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for FAULL & SON TOOL & DIE CO.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for FAULL & SON TOOL & DIE CO.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for FAULL & SON TOOL & DIE CO.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for FAULL & SON TOOL & DIE CO.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2008-08-22 | Complaint | 9 | 6 | $1,450 | |
| 1989-10-13 | Complaint | 16 | 8 | $560 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in hardware manufacturing within OH, ordered by federal enforcement volume:
- HBD INDUSTRIES INC.BELLEFONTAINE — 3 federal enforcement records
- MURPHY INDUSTRIESMARION — 2 federal enforcement records
- GENERAL MOTORS LLCDEFIANCE — 2 federal enforcement records
- EBERHARD MANUFACTURING CO.STRONGSVILLE — 2 federal enforcement records
- AMITY MOLD CORPORATION, INC.TIPP CITY — 2 federal enforcement records
- VOSS INDUSTRIES, LLCCLEVELAND — 2 federal enforcement records
- WELDCRAFT PRODUCTS CO, INC.DAYTON — 1 federal enforcement record
- CLAMPCO PRODUCTS INC.WADSWORTH — 1 federal enforcement record
- NVENTSOLON — 1 federal enforcement record
- MIDLAKE PRODUCTS & MFG. CO. INC.LOUISVILLE — 1 federal enforcement record
Related searches
- Hardware ManufacturingAll employers in this industry
- Employers in OHState-wide enforcement data
- Hardware Manufacturing in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on FAULL & SON TOOL & DIE CO. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is FAULL & SON TOOL & DIE CO.'s OSHA violation history?
- FAULL & SON TOOL & DIE CO. has 2 OSHA inspections on record with 25 violations and $2,010 in total penalties.
- How does FAULL & SON TOOL & DIE CO.'s safety record compare to its industry?
- FAULL & SON TOOL & DIE CO. operates in the hardware manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.9.