Skip to main content

Establishment profile

ELECTRO CHEMICAL FINISHING CO

2610 REMICO SW, WYOMING, MI, 49509
Operated by Electro Chemical Finishing · 1 of 2 establishments
332813Electroplating, Plating, Polishing, Anodizing, and Coloring
EIN 382181195

Download as PDF →

OSHA inspections
5
over 34 years
Violations
40
$7,390 in penalties
SVEP
YES
Severe violator program

Summary

ELECTRO CHEMICAL FINISHING CO has accumulated 40 OSHA violations across 5 inspections over 34 years of recorded history, with $7,390 in total assessed penalties.

The establishment sits in the 84th percentile for violations within its industry-state peer group of 525 employers. Inspection frequency runs at the 72nd percentile. The most recent enforcement activity was recorded 18 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

ELECTRO CHEMICAL FINISHING CO appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
5
0.1 / yr · last 34 yrs
Violations
40
1.2 / yr
Penalties
$7,390
$185 avg / violation
25% serious75% other
Inspection trigger · planned
4 of 5
Inspection trigger · complaint
1 of 5

80% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 24 citations in this view · $7,390 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 4081.14420222$1,600Mar 1992Mar 1994
29 CFR 1910.0147 C04 I22$1,150Mar 1994Dec 2001
29 CFR 1910.0147 C07 IA22$1,150Mar 1994Dec 2001
29 CFR 1910.1200 F0422Oct 1991Mar 1992
29 CFR 1910.0146 C0411$600Mar 1994Mar 1994
29 CFR 4081.02130211$600Mar 1994Mar 1994
29 CFR 4081.07270111$600Mar 1994Mar 1994
29 CFR 4081.40020211$550Dec 2001Dec 2001
29 CFR 4081.14210411$550Dec 2001Dec 2001
29 CFR 4081.40040211$550Dec 2001Dec 2001
29 CFR 4082.211104 B11$40Oct 1991Oct 1991
29 CFR 4081.12220511Dec 2001Dec 2001
29 CFR 1910.0305 B0111Dec 2001Dec 2001
29 CFR 4081.00360111Dec 2001Dec 2001
29 CFR 4081.02310611Dec 2001Dec 2001
29 CFR 4081.06320511Dec 2001Dec 2001
29 CFR 4081.12220611Dec 2001Dec 2001
29 CFR 4081.21760111Dec 2001Dec 2001
29 CFR 4081.33080111Dec 2001Dec 2001
29 CFR 4081.76100511Dec 2001Dec 2001

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

84th

Worse on violations than most other employers in NAICS 3328 within MI. Peer group: 525 employers. This establishment has 40 OSHA violations; peer median is 10.

Fewer violationsMore violations
Penalty percentile
82nd
peer median: $1,500
Inspection frequency
72nd
peer median: 2

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
14.5
vs industry
+12.2
TRIR
14.5
vs industry
+10.4

Reported for 58 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
4.1
BLS SOII 2024
Industry avg DART
2.3
BLS SOII 2024
Self-reported TRIR
14.5
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
4
Complaint
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ELECTRO CHEMICAL FINISHING CO. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
18 years ago

No federal enforcement activity has been recorded against this establishment in 18+ years. Most recent activity: 18 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for ELECTRO CHEMICAL FINISHING CO. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for ELECTRO CHEMICAL FINISHING CO. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for ELECTRO CHEMICAL FINISHING CO. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ELECTRO CHEMICAL FINISHING CO. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for ELECTRO CHEMICAL FINISHING CO. Verify directly with Environmental Protection Agency

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for ELECTRO CHEMICAL FINISHING CO. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2007-10-02Planned0$0
2001-10-15Planned145$2,750
1994-02-16Planned115$4,600
1992-02-03Planned7$0
1991-08-08Complaint8$40

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Part of a larger organization

ELECTRO CHEMICAL FINISHING CO is one of 2 establishments rolled up under the parent organization Electro Chemical Finishing.

Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Electro Chemical Finishing across all 2 of its tracked locations is viewable on the parent profile.

Other employers in this industry and state

Other employers in electroplating, plating, polishing, anodizing, and coloring within MI, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on ELECTRO CHEMICAL FINISHING CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Electro Chemical Finishing, which operates 2 establishments in our dataset.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is ELECTRO CHEMICAL FINISHING CO's OSHA violation history?
ELECTRO CHEMICAL FINISHING CO has 5 OSHA inspections on record with 40 violations and $7,390 in total penalties.
How does ELECTRO CHEMICAL FINISHING CO's safety record compare to its industry?
ELECTRO CHEMICAL FINISHING CO operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. ELECTRO CHEMICAL FINISHING CO's self-reported DART rate is 14.46 compared to an industry average of 2.3.