Establishment profile
ELM PLATING CO
1319 S ELM AVE, JACKSON, MI, 49203
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
EIN 381956395
Summary
ELM PLATING CO has accumulated 16 OSHA violations across 9 inspections over 35 years of recorded history, with $10,713 in total assessed penalties.
The establishment sits in the 59th percentile for violations within its industry-state peer group of 517 employers. Inspection frequency runs at the 89th percentile. The most recent enforcement activity was recorded 4 years ago.
Federal records were found in 2 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ELM PLATING CO appears in OSHA workplace safety, WHD wage enforcement, and FMCSA motor carrier registration records only. No matching records were found in MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
44% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Peer comparison
Above average violations in NAICS 3328 within MI. Peer group: 517 employers. This establishment has 16 OSHA violations; peer median is 11.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 61 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ELM PLATING CO. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 4+ years. Most recent activity: 4 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
Department of Labor Wage & Hour Division — minimum-wage, overtime, child-labor, FMLA, and prevailing-wage enforcement.
Wage and hour breakdown by law
Per-statute totals across all closed DOL Wage & Hour cases against this employer. Backwages reflect amounts the agency assessed; civil penalty is the separate fine where applicable. Some acts (Davis-Bacon, SCA, CWHSSA, H-2B, CCPA) don't carry a civil penalty field in DOL's data. 1 statute · 13 violations · $23,819 in backwages
| Statute | Period | Cases | Violations | Workers | Backwages | Civil penalty |
|---|---|---|---|---|---|---|
| FLSA — minimum wage & overtime | Sep 2013 | 1 | 13 | 12 | $23,819 | — |
Source: DOL WHD enforcement database, aggregated per statute. Lifetime totals. A case can cite multiple statutes — so the total here may exceed the case count in the table above.
Wage and hour cases
Closed DOL Wage & Hour Division cases (FLSA, FMLA, H-2B, MSPA, and related statutes). Backwages reflect amounts the agency assessed; civil penalty (CMP) is a separate fine levied on top, where the statute provides for one (FLSA / H-1B / H-2A / MSPA / FMLA / EPPA / FLSA Child Labor; other acts have no CMP column in DOL’s data). The Statutes column lists which laws each case cited. 1 case · 13 violations · $23,819 in backwages · 12 workers affected
| Case period | Industry | Statutes | Violations | Workers | Backwages | Civil penalty |
|---|---|---|---|---|---|---|
| Oct 2011 – Sep 2013 | Electroplating, Plating, Polishing, Anodizing, and Coloring | FLSA | 13 | 12 | $23,819 | — |
Source: DOL WHD enforcement database. Cases shown reflect those the agency has closed and made public. A violation count is the agency’s tally of cited violations (one violation can affect many workers); the workers column counts distinct employees the agency found to be affected.
Mine safety (MSHA)
No MSHA mine safety violations on file for ELM PLATING CO. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ELM PLATING CO. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ELM PLATING CO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ELM PLATING CO. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2022-05-13 | Referral | 3 | 3 | $4,900 | |
| 2022-01-21 | Complaint | 0 | — | $0 | |
| 2017-12-08 | Complaint | 0 | — | $0 | |
| 2017-03-27 | Referral | 3 | 2 | $3,000 | |
| 2017-03-06 | Complaint | 0 | — | $0 | |
| 2016-10-11 | Planned | 3 | 3 | $1,500 | |
| 2006-12-13 | Planned | 0 | — | $0 | |
| 1999-07-22 | Referral | 7 | 5 | $1,313 | |
| 1990-09-26 | Complaint | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within MI, ordered by federal enforcement volume:
- REGAL FINISHING COMPANYCOLOMA — 3 federal enforcement records
- FITZGERALD FINISHING LLCDETROIT — 3 federal enforcement records
- BEACON PARK FINISHING LLCROSEVILLE — 3 federal enforcement records
- ALLIED FINISHING INCGRAND RAPIDS — 2 federal enforcement records
- FINI-FINISH PRODUCTSWARREN — 2 federal enforcement records
- GREAT LAKES METAL FINISHING LLCJACKSON — 2 federal enforcement records
- FLAT ROCK METAL INCORPORATEDFLAT ROCK — 2 federal enforcement records
- INDUSTRIAL COATING INCBRIDGEPORT — 2 federal enforcement records
- PLATING SPECIALTIES INCMADISON HEIGHTS — 2 federal enforcement records
- FINISHING SERVICES INCYPSILANTI — 2 federal enforcement records
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in MIState-wide enforcement data
- Electroplating, Plating, Polishing, in MIIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ELM PLATING CO from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ELM PLATING CO's OSHA violation history?
- ELM PLATING CO has 9 OSHA inspections on record with 16 violations and $10,712.5 in total penalties.
- How does ELM PLATING CO's safety record compare to its industry?
- ELM PLATING CO operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. ELM PLATING CO's self-reported DART rate is 3.42 compared to an industry average of 2.3.