Establishment profile
EDGE MANUFACTURING INC.
1120 MASON CIRCLE S., PEVELY, MO, 63070
332215 — Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) Manufacturing
EIN 431660398
Summary
EDGE MANUFACTURING INC. has accumulated 10 OSHA violations across 2 inspections over 6 years of recorded history, with $31,030 in total assessed penalties.
The establishment sits in the 68th percentile for violations within its industry-state peer group of 23 employers. Inspection frequency runs at the 36th percentile. The most recent enforcement activity was recorded 3 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
EDGE MANUFACTURING INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 10 distinct standards shown · 10 citations in this view · $31,030 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0147 D02 | 1 | 1 | $8,354 | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $5,968 | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0147 C06 II | 1 | 1 | $5,968 | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0335 A01 I | 1 | 1 | $5,968 | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0135 A01 | 1 | 1 | $4,773 | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0147 D04 I | 1 | 1 | — | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0147 D03 | 1 | 1 | — | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | — | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0217 B07 III | 1 | 1 | — | Jul 2019 | Jul 2019 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Jul 2019 | Jul 2019 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3322 within MO. Peer group: 23 employers. This establishment has 10 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 114 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jul 2019
Most frequent event: Struck against moving part of machinery or equipment
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jul 15, 2019 | Struck against moving part of machinery or equipment | Hand(s), except finger(s) | Hospitalized |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Jul 15, 2019 | Abrasion,Abrasive Wheel,Caught In,Contact,Contusion,Finger,Fracture,Grinder,Grinding Machine,Grinding Wheel,Laceration,Machine operator,Puncture,Steel,Thumb | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 3+ years. Most recent activity: 3 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for EDGE MANUFACTURING INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for EDGE MANUFACTURING INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for EDGE MANUFACTURING INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for EDGE MANUFACTURING INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for EDGE MANUFACTURING INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for EDGE MANUFACTURING INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2022-12-13 | Follow-up | 0 | — | $0 | |
| 2019-07-23 | Referral | 10 | 9 | $31,030 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Metal Kitchen Cookware, Utensil, Cutlery, and Flatware (except Precious) ManufacturingAll employers in this industry
- Employers in MOState-wide enforcement data
- Metal Kitchen Cookware, in MOIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on EDGE MANUFACTURING INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is EDGE MANUFACTURING INC.'s OSHA violation history?
- EDGE MANUFACTURING INC. has 2 OSHA inspections on record with 10 violations and $31,029.6 in total penalties.
- How does EDGE MANUFACTURING INC.'s safety record compare to its industry?
- EDGE MANUFACTURING INC. operates in the metal kitchen cookware, utensil, cutlery, and flatware (except precious) manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.6. EDGE MANUFACTURING INC.'s self-reported DART rate is 1.8 compared to an industry average of 2.2.