Establishment profile
ECO FINISHING CO
5100 INDUSTRIAL BLVD NE, MINNEAPOLIS, MN, 55421
332813 — Electroplating, Plating, Polishing, Anodizing, and Coloring
Summary
ECO FINISHING CO has accumulated 19 OSHA violations across 9 inspections over 28 years of recorded history, with $5,065 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 221 employers. Inspection frequency runs at the 86th percentile. The most recent enforcement activity was recorded 1 months ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
ECO FINISHING CO appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
44% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 19 citations in this view · $5,065 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 5205.011601 | 2 | 2 | $720 | Mar 2003 | Mar 2014 |
| 29 CFR 1910.0146 C04 | 1 | 1 | $600 | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0132 D01 | 1 | 1 | $600 | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0151 C | 1 | 1 | $600 | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0134 A02 | 1 | 1 | $600 | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0176 B | 1 | 1 | $420 | May 2018 | May 2018 |
| 29 CFR 1910.0219 C03 | 1 | 1 | $315 | Mar 2014 | Mar 2014 |
| 29 CFR 1910.0134 F02 | 1 | 1 | $315 | Mar 2014 | Mar 2014 |
| 29 CFR 1910.0242 B | 1 | 1 | $315 | Mar 2014 | Mar 2014 |
| 29 CFR 5205.120003 | 1 | 1 | $300 | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0305 G01 IV | 1 | 1 | $140 | May 2018 | May 2018 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $140 | Mar 1998 | Mar 1998 |
| 29 CFR 5206.070001 B | 1 | 1 | — | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0124 G02 | 1 | 1 | — | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0133 A01 | 1 | 1 | — | Mar 2003 | Mar 2003 |
| 29 CFR 1910.0146 D03 | 1 | 1 | — | Mar 2003 | Mar 2003 |
| 29 CFR 5205.120004 | 1 | 1 | — | Mar 2003 | Mar 2003 |
| 29 CFR 1820.65308 | 1 | 1 | — | Mar 2003 | Mar 2003 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3328 within MN. Peer group: 221 employers. This establishment has 19 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 91 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for ECO FINISHING CO. Verify directly with Occupational Safety and Health Administration →
Activity timeline
Most recent federal enforcement activity recorded 1 months ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for ECO FINISHING CO. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for ECO FINISHING CO. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for ECO FINISHING CO. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for ECO FINISHING CO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for ECO FINISHING CO. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
ECO FINISHING 5100 INDUSTRIAL BLVD. · FRIDLEY, MN, 55421 | AirRCRATRI | No Violation Identified | 0 | 0 | — | Aug 2021 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2026-07-30 | Planned | 0 | — | $0 | |
| 2023-03-31 | Complaint | 0 | — | $0 | |
| 2018-05-02 | Planned | 2 | 1 | $560 | |
| 2014-03-10 | Planned | 4 | 4 | $1,365 | |
| 2007-04-03 | Planned | 0 | — | $0 | |
| 2004-02-23 | Follow-up | 0 | — | $0 | |
| 2003-06-10 | Follow-up | 0 | — | $0 | |
| 2003-01-22 | Planned | 12 | 8 | $3,000 | |
| 1998-03-11 | Planned | 1 | 1 | $140 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in electroplating, plating, polishing, anodizing, and coloring within MN, ordered by federal enforcement volume:
- PIONEER METAL FINISHING LLCMINNEAPOLIS — 2 federal enforcement records
- TWIN CITY PLATING CO.MINNEAPOLIS — 2 federal enforcement records
- HIAWATHA METALCRAFT INCMINNEAPOLIS — 2 federal enforcement records
- TWIN CITY CHROMIUM PLATING COMPANYMINNEAPOLIS — 2 federal enforcement records
- COOPERATIVE PLATING COMPANYSAINT PAUL — 2 federal enforcement records
- SPECTRUM METAL FINISHING INCISLE — 2 federal enforcement records
- PIONEER METAL FINISHING CORPORATIONMINNEAPOLIS — 2 federal enforcement records
- KEYSTONE AUTOMOTIVE INDUSTRIES INCBRAINERD — 2 federal enforcement records
- A1A MASTER SANDBLASTING SERVICE INCMINNEAPOLIS — 1 federal enforcement record
- AVTEC FINISHING SYSTEMS INCMINNEAPOLIS — 1 federal enforcement record
Related searches
- Electroplating, Plating, Polishing, Anodizing, and ColoringAll employers in this industry
- Employers in MNState-wide enforcement data
- Electroplating, Plating, Polishing, in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on ECO FINISHING CO from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is ECO FINISHING CO's OSHA violation history?
- ECO FINISHING CO has 9 OSHA inspections on record with 19 violations and $5,065 in total penalties.
- How does ECO FINISHING CO's safety record compare to its industry?
- ECO FINISHING CO operates in the electroplating, plating, polishing, anodizing, and coloring industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1. ECO FINISHING CO's self-reported DART rate is 1.04 compared to an industry average of 2.3.