Establishment profile
DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS
2100 W. BROAD ST., ELIZABETHTOWN, NC, 28337
334514 — Totalizing Fluid Meter and Counting Device Manufacturing
Summary
DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS has accumulated 126 OSHA violations across 5 inspections over 26 years of recorded history, with $32,150 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 42 employers. Inspection frequency runs at the 95th percentile. The most recent enforcement activity was recorded 15 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
80% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 24 citations in this view · $30,030 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0106 E06 II | 3 | 3 | $1,750 | Jan 2000 | Sep 2005 |
| 29 CFR 1910.0212 A03 II | 2 | 2 | $2,900 | Jan 2000 | Nov 2010 |
| 29 CFR 1910.0106 E02 IVD | 2 | 2 | — | Jan 2000 | Sep 2005 |
| 29 CFR 1910.1027 D01 I | 1 | 1 | $4,900 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0146 C05 IIC | 1 | 1 | $2,240 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0305 E01 | 1 | 1 | $2,240 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0133 A01 | 1 | 1 | $2,100 | Nov 2010 | Nov 2010 |
| 29 CFR 1910.0106 E06 I | 1 | 1 | $2,100 | Sep 2005 | Sep 2005 |
| 29 CFR 1910.0132 D01 I | 1 | 1 | $1,600 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0094 D09 V | 1 | 1 | $1,200 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0304 F05 VC5 | 1 | 1 | $1,120 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0305 B01 | 1 | 1 | $1,120 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0094 D10 | 1 | 1 | $980 | Mar 2000 | Mar 2000 |
| 29 CFR 1910.1001 J02 I | 1 | 1 | $980 | Mar 2000 | Mar 2000 |
| 29 CFR 1910.0184 I09 III | 1 | 1 | $800 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $800 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0027 B01 III | 1 | 1 | $800 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $800 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0213 C01 | 1 | 1 | $800 | Jan 2000 | Jan 2000 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $800 | Jan 2000 | Jan 2000 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3345 within NC. Peer group: 42 employers. This establishment has 126 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2010-10-04 | Complaint | 6 | 4 | $9,100 | |
| 2007-03-29 | Complaint | 0 | — | $0 | |
| 2005-08-09 | Accident | 4 | 4 | $3,150 | |
| 2000-02-04 | Referral | 22 | 16 | $3,500 | |
| 1999-12-08 | Planned | 94 | 34 | $16,400 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in totalizing fluid meter and counting device manufacturing within NC, ordered by federal enforcement volume:
- MEASUREMENT CONTROLS, INC.CHARLOTTE — 1 federal enforcement record
- MUELLER WATER PRODUCTS, INC.CLEVELAND — 1 federal enforcement record
Related searches
- Totalizing Fluid Meter and Counting Device ManufacturingAll employers in this industry
- Employers in NCState-wide enforcement data
- Totalizing Fluid Meter in NCIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS's OSHA violation history?
- DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS has 5 OSHA inspections on record with 126 violations and $32,150 in total penalties.
- How does DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS's safety record compare to its industry?
- DYNAPAR CORPORATION DBA DANAHER SENSORS & CONTROLS operates in the totalizing fluid meter and counting device manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 0.9.