Establishment profile
DIENAMIC TOOLING SYSTEMS, INC.
303 SAM RAYBURN PARKWAY, LENOIR CITY, TN, 37771
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
EIN 383402959
Summary
DIENAMIC TOOLING SYSTEMS, INC. has accumulated 21 OSHA violations across 3 inspections over 16 years of recorded history, with $9,300 in total assessed penalties.
The establishment sits in the 80th percentile for violations within its industry-state peer group of 116 employers. Inspection frequency runs at the 64th percentile. The most recent enforcement activity was recorded 10 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DIENAMIC TOOLING SYSTEMS, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $9,300 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A03 II | 1 | 1 | $3,000 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0147 C06 II | 1 | 1 | $1,200 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $1,200 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0147 C04 IIB | 1 | 1 | $1,200 | Jun 2010 | Jun 2010 |
| 29 CFR 1910.0146 C01 | 1 | 1 | $1,050 | Apr 2010 | Apr 2010 |
| 29 CFR 1910.0151 C | 1 | 1 | $750 | Apr 2010 | Apr 2010 |
| RULE 800-1-3-.05(1)(A)2 | 1 | 1 | $400 | Oct 2015 | Oct 2015 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $150 | Apr 2010 | Apr 2010 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $150 | Apr 2010 | Apr 2010 |
| 29 CFR 1910.1200 F07 | 1 | 1 | $100 | Oct 2015 | Oct 2015 |
| 29 CFR 1910.0022 D01 | 1 | 1 | $100 | Apr 2010 | Apr 2010 |
| 29 CFR 1910.0146 C04 | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 1910.0303 G01 IB | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 1910.0146 C02 | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 1910.1200 F05 II | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 1910.1200 G01 | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 9000.602 | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 1910.0146 G01 | 1 | 1 | — | Apr 2010 | Apr 2010 |
| 29 CFR 1910.0146 G04 | 1 | 1 | — | Apr 2010 | Apr 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within TN. Peer group: 116 employers. This establishment has 21 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 52 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DIENAMIC TOOLING SYSTEMS, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DIENAMIC TOOLING SYSTEMS, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DIENAMIC TOOLING SYSTEMS, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DIENAMIC TOOLING SYSTEMS, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DIENAMIC TOOLING SYSTEMS, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DIENAMIC TOOLING SYSTEMS, INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-09-16 | Referral | 2 | — | $500 | |
| 2010-04-15 | Referral | 4 | 4 | $6,600 | |
| 2010-02-10 | Planned | 15 | 6 | $2,200 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within TN, ordered by federal enforcement volume:
- VAUGHN MANUFACTURING CO INCNASHVILLE — 2 federal enforcement records
- WINSETT TOOL INCPARIS — 1 federal enforcement record
- INDUSTRIAL MACHINE SERVICES INCALEXANDRIA — 1 federal enforcement record
- BLUE STEEL TOOL & DIE INCUNION CITY — 1 federal enforcement record
- HI-TECH MANUFACTURING CO INCLEXINGTON — 1 federal enforcement record
- MOELLER AEROSPACE TECHNOLOGY INC DBA METAL WORKINGBRENTWOOD — 1 federal enforcement record
- ACU-CAST TECHNOLOGIES LLCLAWRENCEBURG — 1 federal enforcement record
- J & J TOOL AND DIE, INC.GREENEVILLE — 1 federal enforcement record
- FAMPEC TECHNOLOGY LLCMURFREESBORO — 1 federal enforcement record
- AXIS FABRICATION & MACHINE CO., LLCROCKFORD — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in TNState-wide enforcement data
- Special Die and in TNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DIENAMIC TOOLING SYSTEMS, INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DIENAMIC TOOLING SYSTEMS, INC.'s OSHA violation history?
- DIENAMIC TOOLING SYSTEMS, INC. has 3 OSHA inspections on record with 21 violations and $9,300 in total penalties.
- How does DIENAMIC TOOLING SYSTEMS, INC.'s safety record compare to its industry?
- DIENAMIC TOOLING SYSTEMS, INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. DIENAMIC TOOLING SYSTEMS, INC.'s self-reported DART rate is 1.67 compared to an industry average of 1.4.