Establishment profile
FAMPEC TECHNOLOGY LLC
427 N FRONT ST, MURFREESBORO, TN, 37130
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
FAMPEC TECHNOLOGY LLC has accumulated 16 OSHA violations across 2 inspections over 16 years of recorded history, with $650 in total assessed penalties.
The establishment sits in the 68th percentile for violations within its industry-state peer group of 114 employers. Inspection frequency runs at the 52nd percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
FAMPEC TECHNOLOGY LLC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 16 distinct standards shown · 16 citations in this view · $650 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $400 | Feb 2014 | Feb 2014 |
| 29 CFR 1910.0215 A02 | 1 | 1 | $250 | May 2010 | May 2010 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | — | Feb 2014 | Feb 2014 |
| 29 CFR 1910.1200 J01 | 1 | 1 | — | Feb 2014 | Feb 2014 |
| 29 CFR 1910.1200 G08 | 1 | 1 | — | Feb 2014 | Feb 2014 |
| 29 CFR 9000.7 | 1 | 1 | — | Feb 2014 | Feb 2014 |
| 29 CFR 1910.0157 E02 | 1 | 1 | — | Feb 2014 | Feb 2014 |
| 29 CFR 9000.602 | 1 | 1 | — | Feb 2014 | Feb 2014 |
| 29 CFR 1910.0157 G02 | 1 | 1 | — | Feb 2014 | Feb 2014 |
| 29 CFR 9000.704 | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.0215 A04 | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.1200 E01 | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.1200 E01 I | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.1200 H02 III | 1 | 1 | — | May 2010 | May 2010 |
| 29 CFR 1910.1200 H03 IV | 1 | 1 | — | May 2010 | May 2010 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3335 within TN. Peer group: 114 employers. This establishment has 16 OSHA violations; peer median is 8.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for FAMPEC TECHNOLOGY LLC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for FAMPEC TECHNOLOGY LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for FAMPEC TECHNOLOGY LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for FAMPEC TECHNOLOGY LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for FAMPEC TECHNOLOGY LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for FAMPEC TECHNOLOGY LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for FAMPEC TECHNOLOGY LLC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for FAMPEC TECHNOLOGY LLC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-01-14 | Planned | 8 | 1 | $400 | |
| 2010-04-07 | Programmed Related | 8 | 3 | $250 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within TN, ordered by federal enforcement volume:
- VAUGHN MANUFACTURING CO INCNASHVILLE — 2 federal enforcement records
- WINSETT TOOL INCPARIS — 1 federal enforcement record
- INDUSTRIAL MACHINE SERVICES INCALEXANDRIA — 1 federal enforcement record
- BLUE STEEL TOOL & DIE INCUNION CITY — 1 federal enforcement record
- HI-TECH MANUFACTURING CO INCLEXINGTON — 1 federal enforcement record
- MOELLER AEROSPACE TECHNOLOGY INC DBA METAL WORKINGBRENTWOOD — 1 federal enforcement record
- ACU-CAST TECHNOLOGIES LLCLAWRENCEBURG — 1 federal enforcement record
- J & J TOOL AND DIE, INC.GREENEVILLE — 1 federal enforcement record
- HALEY TOOL AND STAMPING, INC.FRANKLIN — 1 federal enforcement record
- AXIS FABRICATION & MACHINE CO., LLCROCKFORD — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in TNState-wide enforcement data
- Special Die and in TNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on FAMPEC TECHNOLOGY LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is FAMPEC TECHNOLOGY LLC's OSHA violation history?
- FAMPEC TECHNOLOGY LLC has 2 OSHA inspections on record with 16 violations and $650 in total penalties.
- How does FAMPEC TECHNOLOGY LLC's safety record compare to its industry?
- FAMPEC TECHNOLOGY LLC operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.