Skip to main content

Establishment profile

DESIGN & MANUFACTURING

2000 ILLINOIS, CONNERSVILLE, IN, 47331

Download as PDF →

OSHA inspections
12
over 48 years
Violations
47
$4,145 in penalties
Severe violator (proxy)
YES
FastDOL heuristic — not confirmation of formal OSHA SVEP listing.
Accident investigations on record
1 hospitalizations · 1 OSHA follow-up

Summary

DESIGN & MANUFACTURING has accumulated 47 OSHA violations across 12 inspections over 48 years of recorded history, with $4,145 in total assessed penalties.

The establishment sits in the 99th percentile for violations within its industry-state peer group of 59,153 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 38 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

DESIGN & MANUFACTURING appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.

OSHA workplace safety

Inspections
12
0.3 / yr · last 48 yrs
Violations
47
1.0 / yr
Penalties
$4,145
$88 avg / violation
45% serious55% other
Inspection trigger · complaint
7 of 12
Inspection trigger · planned
3 of 12

67% of inspections at this establishment produced violations, with 5 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $4,145 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 1926.0400 A21$180Apr 1985Apr 1985
29 CFR 1910.0095 B0111$1,600Apr 1978Apr 1978
29 CFR 1910.0217 B07 IV11$225Apr 1987Apr 1987
29 CFR 1910.0176 A11$200Jun 1986Jun 1986
29 CFR 1910.0023 C0111$180Sep 1987Sep 1987
29 CFR 2200.08010111$180Sep 1987Sep 1987
29 CFR 1910.0212 A0511$180Sep 1987Sep 1987
29 CFR 1910.0023 C0211$180Sep 1987Sep 1987
29 CFR 1910.0022 B0111$180Sep 1987Sep 1987
29 CFR 1926.0028 A11$180Apr 1985Apr 1985
29 CFR 1926.0302 B0111$180Apr 1985Apr 1985
29 CFR 1926.0250 B08 I11$180Apr 1985Apr 1985
29 CFR 1926.0700 B0211$180Apr 1985Apr 1985
29 CFR 1910.0217 D0411$160Jun 1986Jun 1986
29 CFR 1910.0217 C01 I11$160Jun 1986Jun 1986
29 CFR 1910.0027 B0311Aug 1987Aug 1987
29 CFR 1910.0219 D0111Aug 1987Aug 1987
29 CFR 1910.0027 B0211Aug 1987Aug 1987
29 CFR 1910.0304 F0411Aug 1987Aug 1987
29 CFR 1910.0305 G02 III11Aug 1987Aug 1987

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

99th

Worse on violations than nearly every other employer. Peer group: 59,153 employers. This establishment has 47 OSHA violations; peer median is 3.

Fewer violationsMore violations
Penalty percentile
96th
peer median: $0
Inspection frequency
99th
peer median: 1

Safety self-report (OSHA 300A)

No self-reported injury rates filed with OSHA's Injury Tracking Application for DESIGN & MANUFACTURING. Verify directly with OSHA Injury Tracking Application

Inspection breakdown

Planned
3
Complaint
7
Accident
1
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DESIGN & MANUFACTURING. Verify directly with Occupational Safety and Health Administration

OSHA accident events

Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.

DateEventInjuriesHospitalizedFatalities
Mar 12, 1987POWER PRESS,WORK RULES,CAUGHT BETWEEN,POINT OF OPERATION,STRUCK BY,ARM,PRESS OPERATOR,RAM11

Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
38 years ago

No federal enforcement activity has been recorded against this establishment in 38+ years. Most recent activity: 38 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for DESIGN & MANUFACTURING. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for DESIGN & MANUFACTURING. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for DESIGN & MANUFACTURING. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DESIGN & MANUFACTURING. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for DESIGN & MANUFACTURING. Verify directly with Environmental Protection Agency

Inspection history

DateTriggerViolationsSeriousPenalty
1987-10-23Follow-up0$0
1987-06-23Complaint157$900
1987-06-03Complaint3$0
1987-04-06Complaint1$0
1987-03-12Accident22$225
1986-06-02Complaint62$520
1985-12-19Planned0$0
1985-11-19Complaint0$0
1985-04-17Planned1510$900
1984-09-11Complaint4$0
1984-06-21Planned0$0
1978-03-21Complaint1$1,600

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Related searches

About this data

This profile aggregates federal enforcement records on DESIGN & MANUFACTURING from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is DESIGN & MANUFACTURING's OSHA violation history?
DESIGN & MANUFACTURING has 12 OSHA inspections on record with 47 violations and $4,145 in total penalties.