Establishment profile
DESIGN ENGINEERING & MANUFACTURING CO
310 BEECHWOOD AVE S, BRAHAM, MN, 55006
332313 — Plate Work Manufacturing
Summary
DESIGN ENGINEERING & MANUFACTURING CO has accumulated 22 OSHA violations across 6 inspections over 29 years of recorded history, with $5,383 in total assessed penalties.
The establishment sits in the 85th percentile for violations within its industry-state peer group of 480 employers. Inspection frequency runs at the 80th percentile. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DESIGN ENGINEERING & MANUFACTURING CO appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
50% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 19 distinct standards shown · 22 citations in this view · $5,383 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 5206.070001 | 2 | 2 | $960 | Jun 1997 | Dec 2002 |
| 29 CFR 1910.0212 A01 | 2 | 2 | $473 | Jun 1997 | Aug 2006 |
| 29 CFR 1820.65308 | 2 | 2 | — | Jun 1997 | Dec 2002 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $750 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $420 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0217 C01 I | 1 | 1 | $420 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0023 C01 | 1 | 1 | $375 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | $315 | Jun 1997 | Jun 1997 |
| 29 CFR 5205.011601 | 1 | 1 | $250 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0332 B01 | 1 | 1 | $210 | Aug 2006 | Aug 2006 |
| 29 CFR 1910.0303 B01 I | 1 | 1 | $210 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | $210 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0036 B04 | 1 | 1 | $210 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $158 | Jun 1997 | Jun 1997 |
| 29 CFR 1910.0242 B | 1 | 1 | $157 | Aug 2006 | Aug 2006 |
| 29 CFR 1910.0178 L | 1 | 1 | $125 | Dec 2002 | Dec 2002 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | $70 | Aug 2006 | Aug 2006 |
| 29 CFR 5206.070001 G | 1 | 1 | $70 | Aug 2006 | Aug 2006 |
| 29 CFR 5210.063001 | 1 | 1 | — | Jun 1997 | Jun 1997 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3323 within MN. Peer group: 480 employers. This establishment has 22 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DESIGN ENGINEERING & MANUFACTURING CO. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-09-03 | Planned | 0 | — | $0 | |
| 2006-08-02 | Planned | 5 | 3 | $665 | |
| 2002-11-20 | Planned | 6 | 4 | $2,250 | |
| 1998-04-28 | Planned | 0 | — | $0 | |
| 1997-06-24 | Referral | 0 | — | $0 | |
| 1997-04-10 | Planned | 11 | 10 | $2,468 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in plate work manufacturing within MN, ordered by federal enforcement volume:
- ENGLE FABRICATION LLCSAUK CENTRE — 2 federal enforcement records
- MOORHEAD MACHINERY & BOILER COMINNEAPOPLIS — 2 federal enforcement records
- CHART INDUSTRIES, INC.BURNSVILLE — 1 federal enforcement record
- SYNERGIES LLC DBA IRON WORKSBECKER — 1 federal enforcement record
- ALLOY WELDING AND MANUFACTURING INCSAINT PAUL — 1 federal enforcement record
- RUFF MANUFACTURING INCFARMINGTON — 1 federal enforcement record
- NORTHLAND PROCESS PIPING INCISLE — 1 federal enforcement record
- PRO-TAINER INCALEXANDRIA — 1 federal enforcement record
- MINNESOTA METALWORKS INCDETROIT LAKES — 1 federal enforcement record
- NORTHERN UNITED INCLITTLE FALLS — 1 federal enforcement record
Related searches
- Plate Work ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Plate Work Manufacturing in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DESIGN ENGINEERING & MANUFACTURING CO from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DESIGN ENGINEERING & MANUFACTURING CO's OSHA violation history?
- DESIGN ENGINEERING & MANUFACTURING CO has 6 OSHA inspections on record with 22 violations and $5,383 in total penalties.
- How does DESIGN ENGINEERING & MANUFACTURING CO's safety record compare to its industry?
- DESIGN ENGINEERING & MANUFACTURING CO operates in the plate work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.8.