Establishment profile
DEKALB TOOL & DIE, INC
2220 STEPHENS STREET, TUCKER, GA, 30084
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
EIN 581031619
Summary
DEKALB TOOL & DIE, INC has accumulated 24 OSHA violations across 5 inspections over 35 years of recorded history, with $22,170 in total assessed penalties.
The establishment sits in the 97th percentile for violations within its industry-state peer group of 37 employers. Inspection frequency runs at the 89th percentile. The most recent enforcement activity was recorded 8 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DEKALB TOOL & DIE, INC appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $22,170 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 5A0001 | 2 | 1 | $4,735 | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $4,880 | Dec 2017 | Dec 2017 |
| 29 CFR 1910.0101 B | 1 | 1 | $2,975 | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0215 A04 | 1 | 1 | $2,975 | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $2,975 | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,340 | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $1,000 | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $425 | Mar 2000 | Mar 2000 |
| 29 CFR 1910.0038 A01 | 1 | 1 | $425 | Mar 2000 | Mar 2000 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $100 | Feb 1991 | Feb 1991 |
| 29 CFR 1910.1200 H | 1 | 1 | $100 | Feb 1991 | Feb 1991 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $100 | Feb 1991 | Feb 1991 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | $80 | Feb 1991 | Feb 1991 |
| 29 CFR 1904.0005 A | 1 | 1 | $40 | Feb 1991 | Feb 1991 |
| 29 CFR 1903.0002 A01 | 1 | 1 | $20 | Feb 1991 | Feb 1991 |
| 29 CFR 1910.0215 B09 | 1 | 1 | — | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0037 A04 | 1 | 1 | — | Sep 2015 | Sep 2015 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | Sep 2015 | Sep 2015 |
| 29 CFR 1910.1200 H01 | 1 | 1 | — | Mar 2000 | Mar 2000 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | — | Mar 2000 | Mar 2000 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3335 within GA. Peer group: 37 employers. This establishment has 24 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 37 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Aug 2017
Most frequent event: Caught in running equipment or machinery during regular operation
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Aug 11, 2017 | Caught in running equipment or machinery during regular operation | Finger(s), fingernail(s), unspecified | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Aug 11, 2017 | Amputated,Amputation,Die Cutting Press,Finger,Machine Guarding | 1 | 1 | — |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 8+ years. Most recent activity: 8 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DEKALB TOOL & DIE, INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DEKALB TOOL & DIE, INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DEKALB TOOL & DIE, INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DEKALB TOOL & DIE, INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DEKALB TOOL & DIE, INC. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DEKALB TOOL & DIE, INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of Defense4510566108!FITTING,STRUCTURALcontract · Last action 2009-04-18$78,126
- Department of Defense4511221648!FITTING,STRUCTURALcontract · Last action 2009-06-26$59,320
- Department of Defense4511221660!FITTING,STRUCTURALcontract · Last action 2009-06-26$59,320
- Department of Defense4511220864!FITTING,STRUCTURALcontract · Last action 2009-06-26$59,320
- Department of Defense4511221820!GOVERNMENT FIRST ARcontract · Last action 2009-06-26$50,690
- Department of Defense4510559925!FITTING,STRUCTURALcontract · Last action 2012-08-30$0
Federal contract dollars to this establishment. Primary NAICS: 336413 - OTHER AIRCRAFT PARTS AND AUXILIARY EQUIPMENT MANUFACTURING. Last action: 2012-08-30. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2017-08-22 | Referral | 1 | 1 | $4,880 | |
| 2015-05-05 | Referral | 2 | — | $1,000 | |
| 2015-04-20 | Complaint | 8 | 7 | $15,000 | |
| 2000-03-02 | Planned | 5 | 2 | $850 | |
| 1991-01-07 | Complaint | 8 | 5 | $440 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within GA, ordered by federal enforcement volume:
- MASTER GRAPHIC SERVICESCHAMBLEE — 2 federal enforcement records
- ONEDA CORPORATIONCOLUMBUS — 1 federal enforcement record
- COBB TOOL, INC.MABLETON — 1 federal enforcement record
- A & A DIES, INC.ATLANTA — 1 federal enforcement record
- DALTON DIECUTTING SERVICE INC.DALTON — 1 federal enforcement record
- IMPACT ALLIANCE, LLCALPHARETTA — 1 federal enforcement record
- ROSEY STEEL RULE DIE CO., INC.DALTON — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in GAState-wide enforcement data
- Special Die and in GAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DEKALB TOOL & DIE, INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DEKALB TOOL & DIE, INC's OSHA violation history?
- DEKALB TOOL & DIE, INC has 5 OSHA inspections on record with 24 violations and $22,170 in total penalties.
- How does DEKALB TOOL & DIE, INC's safety record compare to its industry?
- DEKALB TOOL & DIE, INC operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. DEKALB TOOL & DIE, INC's self-reported DART rate is 0 compared to an industry average of 1.4.