Establishment profile
DALTON DIECUTTING SERVICE INC.
607 NORTH ELM STREET, DALTON, GA, 30721
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
Summary
DALTON DIECUTTING SERVICE INC. has accumulated 21 OSHA violations across 2 inspections over 14 years of recorded history, with $11,350 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 37 employers. Inspection frequency runs at the 58th percentile. The most recent enforcement activity was recorded 10 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DALTON DIECUTTING SERVICE INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $11,350 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0304 F01 I | 1 | 1 | $4,200 | May 2012 | May 2012 |
| 29 CFR 1910.0303 B02 | 1 | 1 | $1,050 | May 2012 | May 2012 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,050 | May 2012 | May 2012 |
| 29 CFR 1910.0178 L01 I | 1 | 1 | $750 | May 2012 | May 2012 |
| 29 CFR 1910.0305 G01 IVA | 1 | 1 | $750 | May 2012 | May 2012 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $750 | May 2012 | May 2012 |
| 29 CFR 1910.0304 G05 | 1 | 1 | $700 | May 2012 | May 2012 |
| 29 CFR 1910.0305 B01 I | 1 | 1 | $600 | May 2012 | May 2012 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $600 | May 2012 | May 2012 |
| 29 CFR 1910.0242 B | 1 | 1 | $450 | May 2012 | May 2012 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $450 | May 2012 | May 2012 |
| 29 CFR 1910.1200 H03 IV | 1 | 1 | — | Sep 2016 | Sep 2016 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Sep 2016 | Sep 2016 |
| 29 CFR 1910.0147 C06 I C | 1 | 1 | — | Sep 2016 | Sep 2016 |
| 29 CFR 1910.0178 L04 III | 1 | 1 | — | Sep 2016 | Sep 2016 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0305 G01 III | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0305 G01 IVD | 1 | 1 | — | May 2012 | May 2012 |
| 29 CFR 1910.0219 C04 I | 1 | 1 | — | May 2012 | May 2012 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3335 within GA. Peer group: 37 employers. This establishment has 21 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DALTON DIECUTTING SERVICE INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DALTON DIECUTTING SERVICE INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DALTON DIECUTTING SERVICE INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DALTON DIECUTTING SERVICE INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DALTON DIECUTTING SERVICE INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DALTON DIECUTTING SERVICE INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DALTON DIECUTTING SERVICE INC.. Verify directly with Environmental Protection Agency →
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2016-03-15 | Planned | 4 | — | $0 | |
| 2012-01-20 | Planned | 17 | 13 | $11,350 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within GA, ordered by federal enforcement volume:
- MASTER GRAPHIC SERVICESCHAMBLEE — 2 federal enforcement records
- ONEDA CORPORATIONCOLUMBUS — 1 federal enforcement record
- COBB TOOL, INC.MABLETON — 1 federal enforcement record
- A & A DIES, INC.ATLANTA — 1 federal enforcement record
- DEKALB TOOL & DIE, INCTUCKER — 1 federal enforcement record
- IMPACT ALLIANCE, LLCALPHARETTA — 1 federal enforcement record
- ROSEY STEEL RULE DIE CO., INC.DALTON — 1 federal enforcement record
Related searches
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in GAState-wide enforcement data
- Special Die and in GAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DALTON DIECUTTING SERVICE INC. from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DALTON DIECUTTING SERVICE INC.'s OSHA violation history?
- DALTON DIECUTTING SERVICE INC. has 2 OSHA inspections on record with 21 violations and $11,350 in total penalties.
- How does DALTON DIECUTTING SERVICE INC.'s safety record compare to its industry?
- DALTON DIECUTTING SERVICE INC. operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8.