Establishment profile
DAYTON COATING TECHNOLOGIES, LLC
1926 E. SIEBENTHALER AVE., DAYTON, OH, 45414
332812 — Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers
Summary
DAYTON COATING TECHNOLOGIES, LLC has accumulated 6 OSHA violations across 2 inspections over 14 years of recorded history, with $6,069 in total assessed penalties.
The establishment sits in the 48th percentile for violations within its industry-state peer group of 333 employers. Inspection frequency runs at the 46th percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
DAYTON COATING TECHNOLOGIES, LLC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Peer comparison
Below average violations in NAICS 3328 within OH. Peer group: 333 employers. This establishment has 6 OSHA violations; peer median is 6.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for DAYTON COATING TECHNOLOGIES, LLC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- National Aeronautics and Space AdministrationBORIDE DOPED TI TARGETS THE COATINGS SHALL BE ALTERNATING LAYER, MULTI-COMPONENT TIN- AND ZRN-BASED COATINGS. THE THICKNESS OF EACH INDIVIDUAL LAYER IS EXPECTED TO BE ON THE ORDER OF 100 NANOMETERS. TOTAL COATING THICKNESS SHALL BE 10-20 MICRONS. THE COATINGS SHALL BE PREPARED IN 5 RUNS 3 OF WHICH SHALL BE USING CATHODIC ARC TECHNIQUES AND 2 SHALL BE BY MAGNETRON SPUTTERING. A MINIMUM OF 40 NASA-SUPPLIED TI-6AL-4V SPECIMENS SHALL BE PREPARED PER RUN. SPECIMENS WILL BE A COMBINATION OF 1 DIAM DISCS AND X 4 BARS. THESE SPECIMENS SHALL BE COATED ON ALL SURFACES EXCEPT WHERE THE SPECIMEN IS BEING HELD BY THE FIXTURE THE COATERS USED TO DEPOSIT THESE COATINGS SHALL USE MULTIPLE, INDEPENDENTLY CONTROLLED SOURCES WITH SHUTTERING AND WITH CONTROL OF INDIVIDUAL, ALTERNATING LAYER COMPOSITIONS THE COATERS SHALL BE COMMERCIAL FACILITIES WITH AUTOMATED EQUIPMENT AND STATE-OF-THE-ART DATA ACQUISITION WELL-ESTABLISHED CLEANING PROCEDURES THAT ARE ENVIRONMENTALLY FRIENDLY SHALL BE EMPLOYED. AN IN-CHAMBER PLASMA PRE-TREATMENT SHALL BE EMPLOYED THE OFFEROR SHALL HAVE HAD PRIOR EXPERIENCE WITH US GOVERNMENT CONTRACTS AND HAVE ISO9001:2000 CERTIFICATION OR EQUIVALENT UP TO THREE COATING RUNS TO PRODUCE PROPRIETARY COATINGS TO BE TESTED AT NASA MAY BE OFFERED AS BASELINEScontract · Last action 2007-11-01$39,555
- National Aeronautics and Space AdministrationRESEARCH COMPRESSOR COATINGcontract · Last action 2007-10-29$0
Federal contract dollars to this establishment. Primary NAICS: 332812 - METAL COATING, ENGRAVING (EXCEPT JEWELRY AND SILVERWARE), AND ALLIED SERVICES TO MANUFACTURERS. Last action: 2007-11-01. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-09-08 | Complaint | 3 | 3 | $2,856 | |
| 2011-09-08 | Complaint | 3 | 3 | $3,213 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in metal coating, engraving (except jewelry and silverware), and allied services to manufacturers within OH, ordered by federal enforcement volume:
- ROEMER INDUSTRIESMASURY — 3 federal enforcement records
- NOVELIS ALR ROLLED PRODUCTS, INC.ASHVILLE — 2 federal enforcement records
- METOKOTE CORPORATIONSHEFFIELD VILLAGE — 2 federal enforcement records
- PKI, INC.CINCINNATI — 2 federal enforcement records
- THE CUBBISON COMPANYYOUNGSTOWN — 2 federal enforcement records
- METOKOTE CORP.LIMA — 2 federal enforcement records
- DOWNEY PAINTINGCOLUMBUS — 2 federal enforcement records
- SPRINGCO METAL COATINGS INC.CLEVELAND — 2 federal enforcement records
- SPECTRUM METAL FINISHING INC.YOUNGSTOWN — 2 federal enforcement records
- HERITAGE INDUSTRIAL FINISHING, INC.AKRON — 2 federal enforcement records
Related searches
- Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to ManufacturersAll employers in this industry
- Employers in OHState-wide enforcement data
- Metal Coating, Engraving in OHIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on DAYTON COATING TECHNOLOGIES, LLC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is DAYTON COATING TECHNOLOGIES, LLC's OSHA violation history?
- DAYTON COATING TECHNOLOGIES, LLC has 2 OSHA inspections on record with 6 violations and $6,069 in total penalties.
- How does DAYTON COATING TECHNOLOGIES, LLC's safety record compare to its industry?
- DAYTON COATING TECHNOLOGIES, LLC operates in the metal coating, engraving (except jewelry and silverware), and allied services to manufacturers industry. The industry average Total Recordable Incident Rate (TRIR) is 4.1.