Establishment profile
D&D CNC MACHINING INC
43150 QUARTZ ROAD, STAPLES, MN, 56479
332710 — Machine Shops
Summary
D&D CNC MACHINING INC has accumulated 15 OSHA violations across 3 inspections over 28 years of recorded history, with $2,862 in total assessed penalties.
The establishment sits in the 85th percentile for violations within its industry-state peer group of 803 employers. Inspection frequency runs at the 60th percentile. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
D&D CNC MACHINING INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 12 distinct standards shown · 15 citations in this view · $2,862 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1820.65308 | 3 | 3 | $500 | May 1998 | May 2015 |
| 29 CFR 5206.070001 | 2 | 2 | $570 | May 1998 | May 2015 |
| 29 CFR 5205.0720 | 1 | 1 | $500 | Sep 2011 | Sep 2011 |
| 29 CFR 1910.0242 B | 1 | 1 | $500 | Sep 2011 | Sep 2011 |
| 29 CFR 1910.1200 H03 IV | 1 | 1 | $250 | May 2015 | May 2015 |
| 29 CFR 1910.0178 E01 | 1 | 1 | $158 | May 1998 | May 1998 |
| 29 CFR 1910.0212 A01 | 1 | 1 | $157 | May 1998 | May 1998 |
| 29 CFR 1910.0212 A05 | 1 | 1 | $157 | May 1998 | May 1998 |
| 29 CFR 1910.0305 G02 III | 1 | 1 | $70 | May 1998 | May 1998 |
| 29 CFR 1910.0157 C04 | 1 | 1 | — | May 1998 | May 1998 |
| 29 CFR 1910.0157 G01 | 1 | 1 | — | May 1998 | May 1998 |
| 29 CFR 1910.0157 E03 | 1 | 1 | — | May 1998 | May 1998 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within MN. Peer group: 803 employers. This establishment has 15 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for D&D CNC MACHINING INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for D&D CNC MACHINING INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for D&D CNC MACHINING INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for D&D CNC MACHINING INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for D&D CNC MACHINING INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for D&D CNC MACHINING INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for D&D CNC MACHINING INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
D&D CNC MACHINING INC 43150 QUARTZ RD · STAPLES, MN, 56479 | RCRA | No Violation Identified | 0 | 0 | — | Nov 2011 | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-05-18 | Planned | 3 | 2 | $1,000 | |
| 2011-08-17 | Planned | 3 | 3 | $1,250 | |
| 1998-04-22 | Planned | 9 | 4 | $612 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MN, ordered by federal enforcement volume:
- CHANDLER INDUSTRIES INCBETHEL — 2 federal enforcement records
- CHANDLER INDUSTRIES INCMONTEVIDEO — 2 federal enforcement records
- RIVERSIDE MANUFACTURING INCRAMSEY — 2 federal enforcement records
- AITKIN IRON WORKS INCAITKIN — 2 federal enforcement records
- THE HUSTAD COMPANYMINNEAPLOIS — 2 federal enforcement records
- ELK RIVER MACHINE COMPANY LLCELK RIVER — 2 federal enforcement records
- CHANDLER INDUSTRIES LLCLONG PRAIRIE — 2 federal enforcement records
- DENTIM INC DBA ETCHITBUFFALO — 2 federal enforcement records
- BOWMAN TOOL AND MACHINING COMPANYROCHESTER — 2 federal enforcement records
- TOOLKRAFT INCMINNEAPOLIS — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MNState-wide enforcement data
- Machine Shops in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on D&D CNC MACHINING INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is D&D CNC MACHINING INC's OSHA violation history?
- D&D CNC MACHINING INC has 3 OSHA inspections on record with 15 violations and $2,862 in total penalties.
- How does D&D CNC MACHINING INC's safety record compare to its industry?
- D&D CNC MACHINING INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.