Establishment profile
CUSTOM CUTTING MILLWORKS, INC.
3905 AMELIA AVENUE, OKLAHOMA CITY, OK, 73112
321918 — Other Millwork (including Flooring)
Summary
CUSTOM CUTTING MILLWORKS, INC. has accumulated 20 OSHA violations across 3 inspections over 18 years of recorded history, with $6,035 in total assessed penalties.
The establishment sits in the 92nd percentile for violations within its industry-state peer group of 53 employers. Inspection frequency runs at the 75th percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CUSTOM CUTTING MILLWORKS, INC. appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $6,035 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0213 C01 | 1 | 1 | $2,608 | May 2017 | May 2017 |
| 29 CFR 1910.0305 B01 II | 1 | 1 | $1,304 | May 2017 | May 2017 |
| 29 CFR 1910.0213 N03 | 1 | 1 | $1,304 | May 2017 | May 2017 |
| 29 CFR 1910.0213 B01 | 1 | 1 | $190 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0219 F03 | 1 | 1 | $150 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $150 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0303 G01 I | 1 | 1 | $110 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0305 B02 | 1 | 1 | $110 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0242 B | 1 | 1 | $110 | Jun 2008 | Jun 2008 |
| 29 CFR 1910.1200 H02 | 1 | 1 | — | May 2017 | May 2017 |
| 29 CFR 1910.0213 C02 | 1 | 1 | — | May 2017 | May 2017 |
| 29 CFR 1910.0213 C03 | 1 | 1 | — | May 2017 | May 2017 |
| 29 CFR 1910.0305 B02 I | 1 | 1 | — | May 2017 | May 2017 |
| 29 CFR 1910.0212 B | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0157 C01 | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0147 F02 I | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0037 B02 | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0022 A01 | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1904.0004 | 1 | 1 | — | Jun 2008 | Jun 2008 |
| 29 CFR 1910.0213 I01 | 1 | 1 | — | Jun 2008 | Jun 2008 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3219 within OK. Peer group: 53 employers. This establishment has 20 OSHA violations; peer median is 2.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CUSTOM CUTTING MILLWORKS, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
Self-reported events under 29 CFR 1904.39 (24-hour notification of hospitalization, amputation, or loss of an eye) · Jun 2019
Most frequent event: Caught in running equipment or machinery during maintenance, cleaning
Source: OSHA Severe Injury Reports (federal OSHA only; state-plan states like California, Oregon, and Washington maintain their own programs and do not consistently report into this feed).
Severe injury reports — events
Each row is a hospitalization, amputation, or eye-loss event the employer self-reported to OSHA under 29 CFR 1904.39. Narratives are written by the reporting employer.
| Date | Event | Body part | Outcome | |
|---|---|---|---|---|
| Jun 11, 2019 | Caught in running equipment or machinery during maintenance, cleaning | Finger(s), fingernail(s), n.e.c. | Amputation |
Source: OSHA Severe Injury Reports. Federal-OSHA jurisdiction only by default; some state-plan programs report voluntarily.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CUSTOM CUTTING MILLWORKS, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CUSTOM CUTTING MILLWORKS, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CUSTOM CUTTING MILLWORKS, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CUSTOM CUTTING MILLWORKS, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CUSTOM CUTTING MILLWORKS, INC.. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CUSTOM CUTTING MILLWORKS, INC.. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2019-01-17 | Follow-up | 0 | — | $0 | |
| 2017-02-08 | Planned | 7 | 6 | $5,215 | |
| 2008-05-28 | Planned | 13 | 8 | $820 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in other millwork (including flooring) within OK, ordered by federal enforcement volume:
- WOOD SYSTEMS, INC.TULSA — 2 federal enforcement records
- PENLOYD LLCTULSA — 2 federal enforcement records
- SOUTHERN MILLWORK CO., INC.TULSA — 1 federal enforcement record
- AMERICAN MILLWORK CO., INC.OKLAHOMA CITY — 1 federal enforcement record
- TOM HOCH INTERIOR DESIGNSOKLAHOMA CITY — 1 federal enforcement record
- SHUTTER MILL INC DBA KIRTZ SHUTTERSSTILLWATER — 1 federal enforcement record
- WOODGRAIN MILLWORK INCORPORATEDOKLAHOMA CITY — 1 federal enforcement record
Related searches
- Other Millwork (including Flooring)All employers in this industry
- Employers in OKState-wide enforcement data
- Other Millwork (including in OKIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CUSTOM CUTTING MILLWORKS, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CUSTOM CUTTING MILLWORKS, INC.'s OSHA violation history?
- CUSTOM CUTTING MILLWORKS, INC. has 3 OSHA inspections on record with 20 violations and $6,035.2 in total penalties.
- How does CUSTOM CUTTING MILLWORKS, INC.'s safety record compare to its industry?
- CUSTOM CUTTING MILLWORKS, INC. operates in the other millwork (including flooring) industry. The industry average Total Recordable Incident Rate (TRIR) is 4.