Establishment profile
CP SHEET METALS INC
5820 188TH ST SW STE B, LYNNWOOD, WA, 98037
332322 — Sheet Metal Work Manufacturing
Summary
CP SHEET METALS INC has accumulated 22 OSHA violations across 2 inspections over 20 years of recorded history, with $2,280 in total assessed penalties.
The establishment sits in the 91st percentile for violations within its industry-state peer group of 511 employers. Inspection frequency runs at the 53rd percentile. The most recent enforcement activity was recorded 10 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CP SHEET METALS INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 2 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 22 citations in this view · $2,280 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 296-27-01101(1) | 2 | 1 | $400 | Dec 2015 | Dec 2015 |
| 296-27-02105(1)(B) | 2 | 1 | — | Dec 2015 | Dec 2015 |
| 296-806-20030 | 1 | 1 | $1,000 | Dec 2015 | Dec 2015 |
| 296-27-01119(2)(B) | 1 | 1 | $400 | Dec 2015 | Dec 2015 |
| 29 CFR 8001.5020 | 1 | 1 | $160 | Jan 2006 | Jan 2006 |
| 29 CFR 8001.6065 | 1 | 1 | $160 | Jan 2006 | Jan 2006 |
| 29 CFR 8002.2022 | 1 | 1 | $160 | Jan 2006 | Jan 2006 |
| 296-800-32025 | 1 | 1 | — | Dec 2015 | Dec 2015 |
| 296-800-13025(2) | 1 | 1 | — | Dec 2015 | Dec 2015 |
| 296-27-01119(2)(C) | 1 | 1 | — | Dec 2015 | Dec 2015 |
| 296-800-14005 | 1 | 1 | — | Dec 2015 | Dec 2015 |
| 296-800-14020 | 1 | 1 | — | Dec 2015 | Dec 2015 |
| 29 CFR 8001.6010 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 8001.6025 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 8064.0508 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 8064.0510 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 8002.802501 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 8001.4025 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 8002.803501 | 1 | 1 | — | Jan 2006 | Jan 2006 |
| 29 CFR 8001.6005 | 1 | 1 | — | Jan 2006 | Jan 2006 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3323 within WA. Peer group: 511 employers. This establishment has 22 OSHA violations; peer median is 4.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CP SHEET METALS INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CP SHEET METALS INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 10+ years. Most recent activity: 10 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CP SHEET METALS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CP SHEET METALS INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CP SHEET METALS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CP SHEET METALS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CP SHEET METALS INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CP SHEET METALS INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2015-10-06 | Referral | 11 | 1 | $1,800 | |
| 2005-10-26 | Planned | 11 | 6 | $480 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in sheet metal work manufacturing within WA, ordered by federal enforcement volume:
- STEELER INCSEATTLE — 3 federal enforcement records
- GENERAL SHEET METAL INCOLYMPIA — 3 federal enforcement records
- NOLL NORWESCO LLCFIFE — 3 federal enforcement records
- GENERAL SHEET METAL INCYELM — 2 federal enforcement records
- PRECISION FABRICATORS LLCSEATTLE — 2 federal enforcement records
- NOLL/NORWESCO LLCFIFE — 2 federal enforcement records
- STEELER INCBELLEVUE — 2 federal enforcement records
- ROOFING SERVICES INCMOUNT VERNON — 2 federal enforcement records
- WEST COAST MANUFACTURINGEVERETT — 2 federal enforcement records
- STEPHENS METAL PRODUCTS INCYAKIMA — 2 federal enforcement records
Related searches
- Sheet Metal Work ManufacturingAll employers in this industry
- Employers in WAState-wide enforcement data
- Sheet Metal Work in WAIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CP SHEET METALS INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CP SHEET METALS INC's OSHA violation history?
- CP SHEET METALS INC has 2 OSHA inspections on record with 22 violations and $2,280 in total penalties.
- How does CP SHEET METALS INC's safety record compare to its industry?
- CP SHEET METALS INC operates in the sheet metal work manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 3.3.