Establishment profile
CONTROL CONCEPTS INC
7870 PARK DR, CHANHASSEN, MN, 55317
Operated by Comfort Systems USA · 1 of 1,023 establishments
333514 — Special Die and Tool, Die Set, Jig, and Fixture Manufacturing
EIN 411379624
Summary
CONTROL CONCEPTS INC has accumulated 4 OSHA violations across 3 inspections over 21 years of recorded history, with $500 in total assessed penalties.
The establishment sits in the 38th percentile for violations within its industry-state peer group of 237 employers. Inspection frequency runs at the 61st percentile. The most recent enforcement activity was recorded 14 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CONTROL CONCEPTS INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
67% of inspections at this establishment produced violations,
Peer comparison
Below average violations in NAICS 3335 within MN. Peer group: 237 employers. This establishment has 4 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 50 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CONTROL CONCEPTS INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 14+ years. Most recent activity: 14 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CONTROL CONCEPTS INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CONTROL CONCEPTS INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CONTROL CONCEPTS INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CONTROL CONCEPTS INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CONTROL CONCEPTS INC. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
CONTROL CONCEPTS INC. 8077 CENTURY BLVD · CHANHASSEN, MN, 55317 | RCRA | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CONTROL CONCEPTS INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseETC POWER CONTROLLER UPGRADEcontract · Last action 2020-03-04$175,340
- National Aeronautics and Space AdministrationCONTROL CONCEPTS INC. HARDWAREcontract · Last action 2018-08-10$63,038
- National Aeronautics and Space AdministrationPURCHASE OF SCR POWERS CONTROLERS(10) AND REMOTE DISPLAY KITS(10) END USER: HENRY SPEIER ANTICIPATED DELIVERY DATE: 10/02/2013 SPECIFICATIONS INCORPORATED BY REFERENCE AND ATTACHED.contract · Last action 2014-05-02$35,450
- Department of DefenseNON-ACAT; AFRL/RQOC; ADP HARDWAREcontract · Last action 2017-08-21$17,275
- National Aeronautics and Space AdministrationMICROFUSION CONTROLLERS&ACCESSORIES FOR THE HEAT CONTROL SYSTEM FOR CRYOGENIC OPERATIONScontract · Last action 2019-08-29$14,546
- Department of the InteriorREQUIREMENT FOR ELECTRIC BOILER CONTROLLERcontract · Last action 2018-02-08$10,400
- Department of DefenseSCR CONTROLLERcontract · Last action 2014-05-15$8,322
- Department of Defense8502665066!SCR POWER CONTROLLERcontract · Last action 2015-11-06$7,110
Federal contract dollars to this establishment. Primary NAICS: 335314 - RELAY AND INDUSTRIAL CONTROL MANUFACTURING. Last action: 2020-03-04. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2011-09-01 | Planned | 0 | — | $0 | |
| 2008-11-05 | Planned | 2 | — | $0 | |
| 2004-09-29 | Planned | 2 | 2 | $500 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
CONTROL CONCEPTS INC is one of 1,023 establishments rolled up under the parent organization Comfort Systems USA.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Comfort Systems USA across all 1,023 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in special die and tool, die set, jig, and fixture manufacturing within MN, ordered by federal enforcement volume:
- JOSTENS INCEAGAN — 2 federal enforcement records
- TRW AUTOMOTIVE INCWINONA — 2 federal enforcement records
- ERICKSON AUTOMATIC INCISANTI — 1 federal enforcement record
- HOUSEWRIGHT DIES INCMINNEAPOLIS — 1 federal enforcement record
- TRIANGLE DIES AND SUPPLIES INCMINNEAPOLIS — 1 federal enforcement record
- QUALITEK ENGINEERING & MFG INCGOLDEN VALLEY — 1 federal enforcement record
- METRO MOLD & DESIGN LLC - BUILDING 1ROGERS — 1 federal enforcement record
- IN TECH INDUSTRIES INCANOKA — 1 federal enforcement record
- MRG TOOL AND DIE CORPFARIBAULT — 1 federal enforcement record
- DIE CONCEPTS INCELK RIVER — 1 federal enforcement record
Other locations under this parent
Other establishments operated by Comfort Systems USA, ordered by federal enforcement volume:
- COMFORT SYSTEMS USA (SOUTHWEST), INC.CHANDLER, AZ — 4 federal enforcement records
- EASTERN HEATING & COOLING COMPANY INC.COLONIE, NY — 3 federal enforcement records
- COMFORT SYSTEMS USA (SOUTHWEST), INC.GOODYEAR, AZ — 3 federal enforcement records
- COMFORT SYSTEMS USA (SOUTHWEST), INC.MARANA, AZ — 3 federal enforcement records
- COMFORT SYSTEMS USA (SOUTHWEST), INC.PHOENIX, AZ — 3 federal enforcement records
- EASTERN HEATING & COOLING COMPANY INC.ALBANY, NY — 3 federal enforcement records
- COMFORT SYSTEMS USA (SOUTHWEST), INC.TUCSON, AZ — 3 federal enforcement records
- EASTERN HEATING AND COOLING, INC.MALTA, NY — 3 federal enforcement records
- Comfort Systems USA Midsouth, IncMontgomery, AL — 2 federal enforcement records
- AIR SYSTEMS ENGINEERING INCTACOMA, WA — 2 federal enforcement records
Related searches
- All Comfort Systems USA locationsParent rollup
- Special Die and Tool, Die Set, Jig, and Fixture ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Special Die and in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CONTROL CONCEPTS INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Comfort Systems USA, which operates 1,023 establishments in our dataset.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CONTROL CONCEPTS INC's OSHA violation history?
- CONTROL CONCEPTS INC has 3 OSHA inspections on record with 4 violations and $500 in total penalties.
- How does CONTROL CONCEPTS INC's safety record compare to its industry?
- CONTROL CONCEPTS INC operates in the special die and tool, die set, jig, and fixture manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 2.8. CONTROL CONCEPTS INC's self-reported DART rate is 0 compared to an industry average of 1.4.