Establishment profile
CONTINENTAL MACHINE & ENGINEERING CO., INC
4949 HUISH DRIVE, EAST CHICAGO, IN, 46312
Summary
CONTINENTAL MACHINE & ENGINEERING CO., INC has accumulated 19 OSHA violations across 7 inspections over 41 years of recorded history, with $10,150 in total assessed penalties.
The establishment sits in the 96th percentile for violations within its industry-state peer group of 59,154 employers. Inspection frequency runs at the 98th percentile. The most recent enforcement activity was recorded 25 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CONTINENTAL MACHINE & ENGINEERING CO., INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
71% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 18 distinct standards shown · 19 citations in this view · $10,150 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 2 | 2 | $1,600 | Sep 1994 | Sep 2001 |
| 29 CFR 1910.0176 B | 1 | 1 | $1,750 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $1,750 | Jul 1993 | Jul 1993 |
| 29 CFR 1910.0179 G01 V | 1 | 1 | $1,225 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.1200 H | 1 | 1 | $1,050 | Jul 1993 | Jul 1993 |
| 29 CFR 1910.0252 B02 III | 1 | 1 | $1,050 | Jul 1993 | Jul 1993 |
| 29 CFR 1910.0303 G02 I | 1 | 1 | $525 | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $450 | Jul 1988 | Jul 1988 |
| 29 CFR 1910.0215 B09 | 1 | 1 | $375 | Sep 2001 | Sep 2001 |
| 29 CFR 1910.0106 D02 I | 1 | 1 | $375 | Sep 2001 | Sep 2001 |
| 29 CFR 1910.0242 B | 1 | 1 | — | Sep 2001 | Sep 2001 |
| 29 CFR 1910.0022 D01 | 1 | 1 | — | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0303 E | 1 | 1 | — | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0178 A04 | 1 | 1 | — | Sep 1994 | Sep 1994 |
| 29 CFR 1910.1200 E01 II | 1 | 1 | — | Sep 1994 | Sep 1994 |
| 29 CFR 1910.0134 B01 | 1 | 1 | — | Jul 1993 | Jul 1993 |
| 29 CFR 1910.0252 E A III | 1 | 1 | — | Jun 1989 | Jun 1989 |
| 29 CFR 1910.0305 B02 | 1 | 1 | — | Jul 1988 | Jul 1988 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer. Peer group: 59,154 employers. This establishment has 19 OSHA violations; peer median is 3.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CONTINENTAL MACHINE & ENGINEERING CO., INC. Verify directly with OSHA Injury Tracking Application →
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CONTINENTAL MACHINE & ENGINEERING CO., INC. Verify directly with Occupational Safety and Health Administration →
OSHA accident events
Accidents, fatalities, and catastrophes documented during OSHA inspections at this employer. Each entry links to the inspection that recorded it.
| Date | Event | Injuries | Hospitalized | Fatalities | |
|---|---|---|---|---|---|
| Aug 8, 1994 | CHEST,UNSECURED,LOAD SHIFT,CAUGHT BETWEEN,CRUSHED,OFF LOADING,STORAGE RACK,UNSTABLE LOAD | 1 | 1 | — | |
| Jun 14, 1988 | NECK,STRUCK BY,FLYING OBJECT,HYDRAULIC PRESS,FACEFatality | 1 | — | 1 |
Source: OSHA accident investigations. Narratives are recorded by the inspecting officer and may be truncated.
Activity timeline
No federal enforcement activity has been recorded against this establishment in 25+ years. Most recent activity: 25 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CONTINENTAL MACHINE & ENGINEERING CO., INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CONTINENTAL MACHINE & ENGINEERING CO., INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CONTINENTAL MACHINE & ENGINEERING CO., INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CONTINENTAL MACHINE & ENGINEERING CO., INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CONTINENTAL MACHINE & ENGINEERING CO., INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2001-09-06 | Planned | 4 | 3 | $1,125 | |
| 1999-03-17 | Planned | 0 | — | $0 | |
| 1994-08-12 | Accident | 8 | 4 | $4,725 | |
| 1993-05-18 | Complaint | 4 | 2 | $3,850 | |
| 1989-04-20 | Follow-up | 1 | — | $0 | |
| 1988-06-15 | Accident | 2 | 1 | $450 | |
| 1985-02-26 | Planned | 0 | — | $0 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Related searches
- Employers in INState-wide enforcement data
About this data
This profile aggregates federal enforcement records on CONTINENTAL MACHINE & ENGINEERING CO., INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CONTINENTAL MACHINE & ENGINEERING CO., INC's OSHA violation history?
- CONTINENTAL MACHINE & ENGINEERING CO., INC has 7 OSHA inspections on record with 19 violations and $10,150 in total penalties.
- Has CONTINENTAL MACHINE & ENGINEERING CO., INC had any workplace fatalities?
- Yes. Federal records show 1 fatality investigation involving CONTINENTAL MACHINE & ENGINEERING CO., INC.