Establishment profile
CONTINENTAL ENGINEERING & MANUFACTURING INC
1145 STOUGHTON AVE, CHASKA, MN, 55318
Operated by Continental Engineering and Manufacturing, Inc
333613 — Mechanical Power Transmission Equipment Manufacturing
Summary
CONTINENTAL ENGINEERING & MANUFACTURING INC has accumulated 41 OSHA violations across 8 inspections over 31 years of recorded history, with $17,625 in total assessed penalties.
The establishment sits in the 100th percentile for violations within its industry-state peer group of 33 employers. Inspection frequency runs at the 91st percentile. The most recent enforcement activity was recorded 13 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CONTINENTAL ENGINEERING & MANUFACTURING INC appears in OSHA workplace safety and UVA Corporate Prosecution Registry records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
75% of inspections at this establishment produced violations, with 6 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 28 citations in this view · $15,590 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 5206.070001 G | 3 | 3 | $3,560 | Oct 2006 | Jun 2013 |
| 29 CFR 1910.0212 A01 | 3 | 3 | $1,220 | Jun 2001 | Sep 2010 |
| 29 CFR 1910.0215 A04 | 2 | 2 | $1,010 | Jun 2001 | Sep 2010 |
| 29 CFR 5205.120003 | 2 | 2 | $670 | Jun 2001 | Sep 2010 |
| 29 CFR 5210.063001 | 2 | 2 | $150 | May 1995 | Jun 2001 |
| 29 CFR 1820.65308 | 2 | 2 | — | Jun 2001 | Jun 2001 |
| 29 CFR 5205.0890 | 1 | 1 | $800 | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0305 D | 1 | 1 | $800 | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $800 | Jun 2001 | Jun 2001 |
| 29 CFR 1820.65302 | 1 | 1 | $800 | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0253 B04 III | 1 | 1 | $800 | Jun 2001 | Jun 2001 |
| 29 CFR 5206.070001 | 1 | 1 | $800 | Jun 2001 | Jun 2001 |
| 29 CFR 5206.080001 | 1 | 1 | $800 | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0219 D01 | 1 | 1 | $600 | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0178 L | 1 | 1 | $600 | Jun 2001 | Jun 2001 |
| 29 CFR 5205.1210 | 1 | 1 | $600 | Jun 2001 | Jun 2001 |
| 29 CFR 1910.1052 D02 | 1 | 1 | $450 | Jun 2013 | Jun 2013 |
| 29 CFR 1910.1052 L03 I | 1 | 1 | $450 | Jun 2013 | Jun 2013 |
| 29 CFR 5205.011601 | 1 | 1 | $400 | Jun 2001 | Jun 2001 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $280 | Oct 2006 | Oct 2006 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3336 within MN. Peer group: 33 employers. This establishment has 41 OSHA violations; peer median is 7.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 12 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CONTINENTAL ENGINEERING & MANUFACTURING INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 13+ years. Most recent activity: 13 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CONTINENTAL ENGINEERING & MANUFACTURING INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CONTINENTAL ENGINEERING & MANUFACTURING INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CONTINENTAL ENGINEERING & MANUFACTURING INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CONTINENTAL ENGINEERING & MANUFACTURING INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CONTINENTAL ENGINEERING & MANUFACTURING INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
First case: 2001-07-20. Most recent: 2001-07-20. Source: UVA Corporate Prosecution Registry — federal pleas, DPAs, and NPAs.
Federal prosecution case file
Federal corporate prosecution records from the University of Virginia Corporate Prosecution Registry. DPA = Deferred Prosecution Agreement; NPA = Non-Prosecution Agreement; both are pre-trial settlements where the defendant accepts terms but avoids conviction. Monitor = court-appointed compliance oversight, usually 2-5 years. 1 case · 1 plea/conviction · $55,000 in penalties / restitution.
| Case | Date | Disposition | Crime | Jurisdiction | Total payment | Monitor |
|---|---|---|---|---|---|---|
USA v. Continental Eng Continental Engineering and Manufacturing, Inc. | Oct 2003 | plea | Environmental | Minnesota | $55,000 | No |
Source: University of Virginia Corporate Prosecution Registry (maintained by Prof. Brandon L. Garrett, Duke University). The registry has no state or jurisdiction-of-incorporation field on the company side, so same-name employers in different states may mis-attribute -- verify against the source case documents when precision matters.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2013-05-16 | Planned | 4 | 2 | $4,050 | |
| 2010-09-01 | Planned | 5 | 3 | $840 | |
| 2006-09-27 | Planned | 10 | 7 | $1,960 | |
| 2002-02-28 | Follow-up | 0 | — | $0 | |
| 2001-04-25 | Complaint | 11 | 9 | $6,000 | |
| 2001-04-25 | Complaint | 9 | 7 | $4,400 | |
| 1995-04-25 | Complaint | 0 | — | $0 | |
| 1995-04-25 | Complaint | 2 | 1 | $375 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Part of a larger organization
CONTINENTAL ENGINEERING & MANUFACTURING INC is one of 1 establishments rolled up under the parent organization Continental Engineering and Manufacturing, Inc.
Federal enforcement records on this page represent activity at this specific establishment only. The full enforcement footprint of Continental Engineering and Manufacturing, Inc across all 1 of its tracked locations is viewable on the parent profile.
Other employers in this industry and state
Other employers in mechanical power transmission equipment manufacturing within MN, ordered by federal enforcement volume:
- P & F MACHININGMAPLE GROVE — 1 federal enforcement record
- HI-LO MANUFACTURING COSTACY — 1 federal enforcement record
- ZERO MAX INCMINNEAPOLIS — 1 federal enforcement record
- REELL PRECISION MANUFACTURING CORPVADNAIS HEIGHTS — 1 federal enforcement record
- TUTHILL LINKAGE GROUPMENDOTA HEIGHTS — 1 federal enforcement record
- REELL PRECISION MANUFACTURING CORPORATIONWHITE BEAR LAKE — 1 federal enforcement record
- HI-LO MANUFACTURING COMPANYMINNEAPOLIS — 1 federal enforcement record
- CONTINENTAL ENGINEERING - MANUFACTURING INCCHASKA — 0 federal enforcement records
Related searches
- All Continental Engineering and Manufacturing, Inc locationsParent rollup
- Mechanical Power Transmission Equipment ManufacturingAll employers in this industry
- Employers in MNState-wide enforcement data
- Mechanical Power Transmission in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CONTINENTAL ENGINEERING & MANUFACTURING INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code. This establishment resolves to the parent rollup Continental Engineering and Manufacturing, Inc.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CONTINENTAL ENGINEERING & MANUFACTURING INC's OSHA violation history?
- CONTINENTAL ENGINEERING & MANUFACTURING INC has 8 OSHA inspections on record with 41 violations and $17,625 in total penalties.
- How does CONTINENTAL ENGINEERING & MANUFACTURING INC's safety record compare to its industry?
- CONTINENTAL ENGINEERING & MANUFACTURING INC operates in the mechanical power transmission equipment manufacturing industry. The industry average Total Recordable Incident Rate (TRIR) is 4. CONTINENTAL ENGINEERING & MANUFACTURING INC's self-reported DART rate is 0 compared to an industry average of 2.6.