Establishment profile
COMMAND TECHNOLOGY, INC
7604 ENERGY PARKWAY, BALTIMORE, MD, 21226
332710 — Machine Shops
EIN 521459214
Summary
COMMAND TECHNOLOGY, INC has accumulated 14 OSHA violations across 1 inspection over 11 years of recorded history, with $4,050 in total assessed penalties.
The establishment sits in the 47th percentile for violations within its industry-state peer group of 82 employers. The most recent enforcement activity was recorded 11 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
COMMAND TECHNOLOGY, INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations,
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 14 distinct standards shown · 14 citations in this view · $4,050 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0212 A01 | 1 | 1 | $1,500 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.1200 E01 | 1 | 1 | $1,050 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $750 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0151 C | 1 | 1 | $750 | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C06 II | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0147 C07 IV | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.1200 F06 II | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0132 D02 | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.1200 H03 IV | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0134 C02 I | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0134 C02 II | 1 | 1 | — | Dec 2014 | Dec 2014 |
| 29 CFR 1910.0134 E01 | 1 | 1 | — | Dec 2014 | Dec 2014 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Below average violations in NAICS 3327 within MD. Peer group: 82 employers. This establishment has 14 OSHA violations; peer median is 14.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 70 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for COMMAND TECHNOLOGY, INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 11+ years. Most recent activity: 11 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for COMMAND TECHNOLOGY, INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for COMMAND TECHNOLOGY, INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for COMMAND TECHNOLOGY, INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for COMMAND TECHNOLOGY, INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for COMMAND TECHNOLOGY, INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for COMMAND TECHNOLOGY, INC. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of DefenseMACHINE PARTScontract · Last action 2008-09-10$60,800
- National Aeronautics and Space AdministrationPURCHASING OF MECHANICAL PIECE PART FABRICATION--BEARING COVERS, MOMENTUM WHEEL SHAFT BEARING I, ELECTRONICS BRACKET, LIFITING FRAME, END WALL, BASE BLOCK, SIDE WALL, AND MOMENTUM WHEEL SHAFT: GEAR INT, AND MOMENTUM WHEEL MOUNTING BASE.contract · Last action 2012-09-28$36,612
- National Aeronautics and Space AdministrationRADIO FREQUENCY (RF) CHASSIS TO SUPPORT WHITE SANDS COMPLEX (WSC) SOFTWARE DEFINED RADIO (SDR): CONTROL MODULE; CONVERSION MODULE AND CONTROL MODULE LID.contract · Last action 2012-12-19$20,465
- Department of DefenseMANUFACTURED PARTScontract · Last action 2013-07-11$13,750
- Department of DefenseSIMULATOR DRAWERcontract · Last action 2010-02-26$12,462
- Department of DefenseVIBE PLATEcontract · Last action 2008-07-18$7,975
- Department of DefenseFABRICATED PARTScontract · Last action 2009-04-20$7,410
- Department of DefenseASSEMBLYcontract · Last action 2012-08-09$7,000
- Department of DefenseMACHINED PARTScontract · Last action 2008-02-08$6,680
- Department of DefenseTHEMAL/WEDGE SPACERcontract · Last action 2008-05-01$6,650
- Department of DefenseMACHINED PARTScontract · Last action 2008-03-18$5,784
- Department of Defense82-1079-08 CRANE SUPPORTcontract · Last action 2008-08-19$4,500
- Department of DefenseMID PLATE END COVERcontract · Last action 2014-07-22$4,475
- Department of DefenseTOP & BOTTOM PLATEScontract · Last action 2009-04-02$4,457
- Department of DefenseSPACING RINGcontract · Last action 2008-01-24$4,225
- Department of DefenseMACHINED PARTScontract · Last action 2014-07-17$4,125
- Department of DefenseMACHINED PARTScontract · Last action 2007-11-19$4,100
- Department of DefensePLATEcontract · Last action 2009-06-09$3,950
- Department of DefenseFABRICATED PARTScontract · Last action 2007-11-15$3,750
- Department of DefenseVIBRATION SUPPORTcontract · Last action 2008-05-09$3,300
- Department of DefenseBOX AND COVERcontract · Last action 2007-10-15$3,120
- Department of Defense8500861646!BRACKET,VEHICULAR Ccontract · Last action 2014-09-18$0
Federal contract dollars to this establishment. Primary NAICS: 332710 - MACHINE SHOPS. Last action: 2014-09-18. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-09-19 | Complaint | 14 | 7 | $4,050 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MD, ordered by federal enforcement volume:
- COVINGTON MACHINE AND WELDING, INC.ANNAPOLIS — 2 federal enforcement records
- SERVICE MACHINE SHOP, INC.NORTH BETHESDA — 2 federal enforcement records
- CLARK MACHINE CORPORATIONROSEDALE — 2 federal enforcement records
- A.I.M., INC.PARKTON — 2 federal enforcement records
- RAY MACHINE INC.BALTIMORE — 2 federal enforcement records
- HOUSE OF BALANCE, INCELKRIDGE — 1 federal enforcement record
- GENERAL MACHINE SHOP, INC.LANDOVER — 1 federal enforcement record
- MANUFACTURING SUPPORT INDUSTRIES INCHEBRON — 1 federal enforcement record
- AEROSTAR MACHINE, INC.ARBUTUS — 1 federal enforcement record
- GREATER MARYLAND TOOL & MFG. CORP.MOUNTAIN LAKE PARK — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MDState-wide enforcement data
- Machine Shops in MDIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on COMMAND TECHNOLOGY, INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is COMMAND TECHNOLOGY, INC's OSHA violation history?
- COMMAND TECHNOLOGY, INC has 1 OSHA inspection on record with 14 violations and $4,050 in total penalties.
- How does COMMAND TECHNOLOGY, INC's safety record compare to its industry?
- COMMAND TECHNOLOGY, INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. COMMAND TECHNOLOGY, INC's self-reported DART rate is 0 compared to an industry average of 1.5.