Establishment profile
GENERAL MACHINE SHOP, INC.
6000 COLUMBIA PARK ROAD, LANDOVER, MD, 20785
332710 — Machine Shops
Summary
GENERAL MACHINE SHOP, INC. has accumulated 73 OSHA violations across 6 inspections over 31 years of recorded history, with $9,707 in total assessed penalties.
The establishment sits in the 99th percentile for violations within its industry-state peer group of 83 employers. Inspection frequency runs at the 89th percentile. The most recent enforcement activity was recorded 7 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
GENERAL MACHINE SHOP, INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.
OSHA workplace safety
83% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Peer comparison
Worse on violations than nearly every other employer in NAICS 3327 within MD. Peer group: 83 employers. This establishment has 73 OSHA violations; peer median is 14.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for GENERAL MACHINE SHOP, INC.. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for GENERAL MACHINE SHOP, INC.. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 7+ years. Most recent activity: 7 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for GENERAL MACHINE SHOP, INC.. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for GENERAL MACHINE SHOP, INC.. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for GENERAL MACHINE SHOP, INC.. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for GENERAL MACHINE SHOP, INC.. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for GENERAL MACHINE SHOP, INC.. Verify directly with Environmental Protection Agency →
EPA-registered facilities
Every EPA ECHO facility associated with this employer, sorted most-significant first. Each row links to EPA’s Detailed Facility Report for the source-of-truth record. Permits column lists active programs (Air = Clean Air Act, Water = Clean Water Act, RCRA = hazardous waste, TRI = Toxics Release Inventory reporting). 1 facility.
| Facility | Permits | Status | Inspections | Formal actions | Penalties | Last inspected | ECHO |
|---|---|---|---|---|---|---|---|
GENERAL MACHINE SHOP, INC. 6000 COLUMBIA PARK ROAD · LANDOVER, MD, 20785 | Water | No Violation Identified | 0 | 0 | — | — | View → |
Source: EPA ECHO (Enforcement and Compliance History Online). Compliance status follows EPA’s own labels (“Sig Violation” = significant noncompliance; QNCR = quarters of noncompliance over the recent reporting window). Inactive facilities (struck through) retain historical enforcement records even after operations ceased.
Motor carrier safety (FMCSA)
Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for GENERAL MACHINE SHOP, INC.. Verify directly with UVA Corporate Prosecution Registry →
Federal contracts
This location
- Department of the TreasuryIGF::OT::IGF BEP IS IN NEED OF SERVICES TO DISMANTLE TWO (2) COPES WITHIN THE FACILITY, AS WELL AS RELOCATING COPE 48 FROM THE WESTERN CURRENCY FACILITY AND INSTALLING IT IN THE WASHINGTON DC CURRENCY FACILITY.contract · Last action 2016-09-30$598,800
- Department of the TreasuryREMOVAL AND TRANSPORT OF SECURITY PRESSEScontract · Last action 2008-04-30$500,000
- Department of the TreasuryIGF::OT::IGF FOR OTHER FUNCTIONS RIGGING, DISASSEMBLY, RELOCATING AND REASSEMBLY SERVICEScontract · Last action 2013-09-10$219,500
- Department of the TreasuryRIGGING, HAULING, AND MOVING SERVICEScontract · Last action 2008-10-30$200,000
- Department of the TreasuryRIGGING SERVICES TO BE PERFORMED BY GENERAL MACHINE SHOP, INC. UNDER BPA NO. 2031ZA21A00008 FOR CUTTING AND DISPOSAL OF COPE 15 PRESS IN B200Mcontract · Last action 2024-06-11$199,700
- Department of the TreasuryMOVING, HAULING SERVICEScontract · Last action 2010-08-02$125,000
- Department of the TreasuryEXERCISE OPTION YEAR 002 RIGGING, HAULING AND MOVING SERVICES.contract · Last action 2008-10-27$100,000
- Department of the TreasuryMOVING, HAULING, RIGGING SERVICE FOR BEP MACHINERY.contract · Last action 2007-11-15$100,000
- Department of the TreasuryRIGGING, HAULING, MOVING, RELOCTION OF MATERIAL AND EQUIPMENT SERVICES.contract · Last action 2009-10-14$95,000
- Department of the TreasuryRIGGING THREE GRINDERScontract · Last action 2021-08-31$66,700
- Department of the TreasuryREMOVAL SUPERNUMEROTA II EQUIPMENTcontract · Last action 2022-06-30$59,500
- Department of the TreasuryRIGGING SERVICES FOR RELOCATING EQUIPMENT FROM A-300M & B-300M AND OR SCRAPPING THE MOVED EQUIPMENT.contract · Last action 2023-08-23$56,420
- National Aeronautics and Space AdministrationIGF::OT::IGF RIGGING SERVICES, INSTALLATION OF MATERIALS. TO PROVIDE TECHNICAL CAPABILITY OF LOADING, UNLOADING, LIFTING, AND TRANSPORTING HEAVY SHIPPING CONTAINERS.contract · Last action 2018-06-14$42,000
- Department of Justice0200 - TRANSPORTATION OF TRIAL EVIDENCEcontract · Last action 2011-02-08$33,770
- Department of CommerceIGF::OT::IGF MOVING, INSTALLATION OF SENSITIVE LABORATORY EQUIPMENTcontract · Last action 2016-08-18$32,140
- Department of CommerceRIGGING SERVICES.contract · Last action 2015-11-06$28,800
- National Aeronautics and Space AdministrationRIGGING OF EQUIPMENTcontract · Last action 2010-03-29$25,080
- Department of the TreasuryOTHER- MACHINERY MOVING/RIGGINGcontract · Last action 2012-09-25$24,700
- Department of DefenseRIGGING SERVICES TO MOVE TMC OPTICAL TABLE VIBRATION CONTROL FROM LOADING DOCK TO CLEANROOM LAB, INSTALL AND EPOXY LEGS IN PLACE AS DIRECTED AT NRL.contract · Last action 2024-10-17$22,680
- Department of CommerceRIGGING SERVICES.contract · Last action 2015-09-10$21,875
- Department of CommerceRATIFICATION FOR RIGGING IGF::OT::IGFcontract · Last action 2016-11-10$14,199
- Department of the TreasuryBAUMFOLDER EQUIPMENT REMOVALcontract · Last action 2021-07-01$12,840
- Department of the TreasuryDISMANTLE, MOVE, AND REASSEMBLE SHEARcontract · Last action 2021-08-15$12,680
- Department of the TreasurySERVICE AGREEMENT FOR RIGGINGcontract · Last action 2010-07-23$10,500
- Department of DefenseLABOR FOR LIFTING OF EQUIPMENT AND SUPVcontract · Last action 2009-08-20$9,885
- Smithsonian InstitutionRIGGING SERVICES FOR NMAHcontract · Last action 2021-02-03$8,880
- Department of CommerceRELOCATION OF THREE LABORATORY ITEMScontract · Last action 2023-09-11$8,325
- Department of DefenseIGF::OT::IGF RELOCATION SERVICEScontract · Last action 2016-05-26$8,300
- Department of DefenseTHE EMERGENCY REPAIR OF AFRRI'S RADIATION SHIELD DOOR.contract · Last action 2010-06-21$8,000
- Department of CommerceIGF::OT::IGF RIGGING SERVICEScontract · Last action 2016-02-03$7,980
- Department of the TreasurySERVICES TO REMOVE EXCESS PROPERTY AT BEP LANDOVER WAREHOUSE.contract · Last action 2011-08-19$7,900
- Department of CommerceRIGGING SERVICES FOR TWO OPTICAL TABLEScontract · Last action 2020-01-16$6,840
- Department of DefenseIGF::OT::IGF 5.2.8 RIGGING OF CNC MACHINEcontract · Last action 2015-11-04$5,850
- Department of the TreasuryIGF::OT::IGF FOR OTHER FUNCTIONScontract · Last action 2016-06-14$5,460
- Smithsonian InstitutionSERVICES, RELOCATION & RIGGING OF CNC ROUTERcontract · Last action 2021-02-04$5,380
- Department of Health and Human ServicesINSTALLATION OF (12) LEVELING PLATES IN ORDER TO ASSIST IN SETTING UP THE OPTICAL TABLE.contract · Last action 2024-01-19$5,300
- Department of CommerceRIGGING SERVICES.contract · Last action 2015-08-28$5,250
- Department of Health and Human ServicesREMOVE AND INSTALL NEW ISOLATION TABLE LEGScontract · Last action 2024-06-06$4,860
- Department of the TreasuryMACHINE REMOVALcontract · Last action 2009-10-15$4,800
- Department of Health and Human ServicesIGF::OT::IGFGENERAL MACHINE SHOP, INC.:1261887 [15-004519]contract · Last action 2015-08-17$4,400
- Department of the Treasury11EM-0017 RIGGING&HAULING MACHINERYcontract · Last action 2011-03-08$4,100
- Department of CommerceRIGGING OF LARGE GRANITE SLAB IGF::OT::IGFcontract · Last action 2016-01-29$3,800
- Department of CommerceMACHINE SHOP - RIGGING SERVICEcontract · Last action 2014-10-23$2,490
- Department of the TreasuryRIGGING SERVICES - DC AND LANDOVERcontract · Last action 2024-06-11$0
- Department of the TreasuryRIGGING SERVICES.contract · Last action 2021-06-28$0
- Department of Health and Human ServicesIGF::OT::IGF OTHER FUNCTIONS - RELOCATE NEWPORT OPTIC TABLE 5'X6'contract · Last action 2020-02-27$0
- Department of DefenseMACHINED PARTScontract · Last action 2011-02-02$0
Federal contract dollars to this establishment. Primary NAICS: 238290 - OTHER BUILDING EQUIPMENT CONTRACTORS. Last action: 2024-10-17. Source: USAspending.gov, net obligations. Recipient address is the SAM registration / HQ address, not necessarily the worksite.
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2018-11-28 | Planned | 28 | 16 | $7,107 | |
| 2015-07-31 | Accident | 0 | — | $0 | |
| 2004-01-29 | Referral | 2 | 1 | $525 | |
| 2003-12-16 | Planned | 12 | 2 | $525 | |
| 1995-01-31 | Referral | 4 | — | $0 | |
| 1995-01-19 | Planned | 27 | 13 | $1,550 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MD, ordered by federal enforcement volume:
- COVINGTON MACHINE AND WELDING, INC.ANNAPOLIS — 2 federal enforcement records
- RAY MACHINE INC.BALTIMORE — 2 federal enforcement records
- CLARK MACHINE CORPORATIONROSEDALE — 2 federal enforcement records
- A.I.M., INC.PARKTON — 2 federal enforcement records
- SERVICE MACHINE SHOP, INC.NORTH BETHESDA — 2 federal enforcement records
- OBOYLE ENTERPRISES, INC. DBA CUSTOM MACHINEHAGERSTOWN — 1 federal enforcement record
- HOUSE OF BALANCE, INCELKRIDGE — 1 federal enforcement record
- MANUFACTURING SUPPORT INDUSTRIES INCHEBRON — 1 federal enforcement record
- SUMATECH, INC.WHITE MARSH — 1 federal enforcement record
- GREATER MARYLAND TOOL & MFG. CORP.MOUNTAIN LAKE PARK — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MDState-wide enforcement data
- Machine Shops in MDIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on GENERAL MACHINE SHOP, INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is GENERAL MACHINE SHOP, INC.'s OSHA violation history?
- GENERAL MACHINE SHOP, INC. has 6 OSHA inspections on record with 73 violations and $9,707.25 in total penalties.
- How does GENERAL MACHINE SHOP, INC.'s safety record compare to its industry?
- GENERAL MACHINE SHOP, INC. operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7.