Establishment profile
CODE WELDING & MFG INC
3151 101ST AVENUE NE, BLAINE, MN, 55449
332710 — Machine Shops
Summary
CODE WELDING & MFG INC has accumulated 21 OSHA violations across 3 inspections over 19 years of recorded history, with $7,025 in total assessed penalties.
The establishment sits in the 93rd percentile for violations within its industry-state peer group of 803 employers. Inspection frequency runs at the 60th percentile. The most recent enforcement activity was recorded 12 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CODE WELDING & MFG INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 20 citations in this view · $7,025 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0095 C01 | 1 | 1 | $750 | Mar 2014 | Mar 2014 |
| 29 CFR 1910.0095 B01 | 1 | 1 | $750 | Mar 2014 | Mar 2014 |
| 29 CFR 1910.0134 A02 | 1 | 1 | $500 | Mar 2014 | Mar 2014 |
| 29 CFR 1910.1052 L01 | 1 | 1 | $500 | Mar 2014 | Mar 2014 |
| 29 CFR 5206.070001 G | 1 | 1 | $500 | Mar 2014 | Mar 2014 |
| 29 CFR 1910.1052 D02 | 1 | 1 | $500 | Nov 2008 | Nov 2008 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | $500 | Nov 2008 | Nov 2008 |
| 29 CFR 1820.65302 | 1 | 1 | $438 | May 2007 | May 2007 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $375 | Nov 2008 | Nov 2008 |
| 29 CFR 1910.1052 I03 I | 1 | 1 | $375 | Nov 2008 | Nov 2008 |
| 29 CFR 1910.0213 H01 | 1 | 1 | $350 | May 2007 | May 2007 |
| 29 CFR 1910.0178 L | 1 | 1 | $350 | May 2007 | May 2007 |
| 29 CFR 1910.0212 A03 II | 1 | 1 | $350 | May 2007 | May 2007 |
| 29 CFR 5206.070001 | 1 | 1 | $326 | May 2007 | May 2007 |
| 29 CFR 1910.0242 B | 1 | 1 | $231 | May 2007 | May 2007 |
| 29 CFR 5205.011601 | 1 | 1 | $230 | May 2007 | May 2007 |
| 29 CFR 1910.1052 D03 | 1 | 1 | — | Nov 2008 | Nov 2008 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Nov 2008 | Nov 2008 |
| 29 CFR 1910.1052 L03 II | 1 | 1 | — | Nov 2008 | Nov 2008 |
| 29 CFR 5206.070001 B | 1 | 1 | — | May 2007 | May 2007 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Worse on violations than most other employers in NAICS 3327 within MN. Peer group: 803 employers. This establishment has 21 OSHA violations; peer median is 5.
Safety self-report (OSHA 300A)
Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.
Reported for 23 average annual employees at this establishment.
Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CODE WELDING & MFG INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 12+ years. Most recent activity: 12 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CODE WELDING & MFG INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CODE WELDING & MFG INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CODE WELDING & MFG INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CODE WELDING & MFG INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CODE WELDING & MFG INC. Verify directly with Environmental Protection Agency →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2014-02-04 | Planned | 5 | 5 | $3,000 | |
| 2008-10-08 | Planned | 7 | 6 | $1,750 | |
| 2007-04-16 | Planned | 9 | 8 | $2,275 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in machine shops within MN, ordered by federal enforcement volume:
- CHANDLER INDUSTRIES INCBETHEL — 2 federal enforcement records
- CHANDLER INDUSTRIES INCMONTEVIDEO — 2 federal enforcement records
- RIVERSIDE MANUFACTURING INCRAMSEY — 2 federal enforcement records
- AITKIN IRON WORKS INCAITKIN — 2 federal enforcement records
- THE HUSTAD COMPANYMINNEAPLOIS — 2 federal enforcement records
- ELK RIVER MACHINE COMPANY LLCELK RIVER — 2 federal enforcement records
- CHANDLER INDUSTRIES LLCLONG PRAIRIE — 2 federal enforcement records
- DENTIM INC DBA ETCHITBUFFALO — 2 federal enforcement records
- BOWMAN TOOL AND MACHINING COMPANYROCHESTER — 2 federal enforcement records
- TOOLKRAFT INCMINNEAPOLIS — 1 federal enforcement record
Related searches
- Machine ShopsAll employers in this industry
- Employers in MNState-wide enforcement data
- Machine Shops in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CODE WELDING & MFG INC from every major federal compliance and enforcement source. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CODE WELDING & MFG INC's OSHA violation history?
- CODE WELDING & MFG INC has 3 OSHA inspections on record with 21 violations and $7,025 in total penalties.
- How does CODE WELDING & MFG INC's safety record compare to its industry?
- CODE WELDING & MFG INC operates in the machine shops industry. The industry average Total Recordable Incident Rate (TRIR) is 2.7. CODE WELDING & MFG INC's self-reported DART rate is 4.35 compared to an industry average of 1.5.