Skip to main content

Establishment profile

CENTRAL SHEET METAL CO. INC.

4444 KELLY STREET, COLUMBUS, IN, 47201
238220Plumbing, Heating, and Air-Conditioning Contractors
EIN 351726031

Download as PDF →

OSHA inspections
10
over 52 years
Violations
25
$1,805 in penalties
Penalties
$1,805
$72 avg
Accident investigations on record
1 National Emphasis Program inspections · 1 OSHA follow-up

Summary

CENTRAL SHEET METAL CO. INC. has accumulated 25 OSHA violations across 10 inspections over 52 years of recorded history, with $1,805 in total assessed penalties.

The establishment sits in the 99th percentile for violations within its industry-state peer group of 3,010 employers. Inspection frequency runs at the 99th percentile. The most recent enforcement activity was recorded 15 years ago.

Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.

Agency coverage

CENTRAL SHEET METAL CO. INC. appears in OSHA workplace safety and FMCSA motor carrier registration records only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls.

OSHA workplace safety

Inspections
10
0.2 / yr · last 52 yrs
Violations
25
0.5 / yr
Penalties
$1,805
$72 avg / violation
16% serious84% other
Inspection trigger · planned
8 of 10
Inspection trigger · follow-up
1 of 10

80% of inspections at this establishment produced violations, with 3 inspections producing serious-or-greater violations.

Most-cited OSHA standards

Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $1,805 in penalties.

CFR sectionCitationsInspectionsTotal penaltyFirst citedLast cited
29 CFR 4000.40222$300Sep 1983Sep 1992
29 CFR 1910.0147 C0111$450Sep 1992Sep 1992
29 CFR 1910.1200 E0111$450Sep 1992Sep 1992
29 CFR 4000.40511$300Sep 1992Sep 1992
29 CFR 1904.000211$100Jul 1973Jul 1973
29 CFR 1926.0451 E0111$90Mar 1989Mar 1989
29 CFR 1926.0100 A11$90Aug 1984Aug 1984
29 CFR 1910.0025 D01 X11$25Jul 1973Jul 1973
29 CFR 1910.0212 B11Sep 1992Sep 1992
29 CFR 1926.0404 A0211Sep 1991Sep 1991
29 CFR 1926.0403 H11Jan 1988Jan 1988
29 CFR 1926.0401 C11Aug 1984Aug 1984
29 CFR 1926.0350 F0611Apr 1983Apr 1983
29 CFR 1910.0157 C02 I11Jul 1973Jul 1973
29 CFR 1910.0106 E06 I11Jul 1973Jul 1973
29 CFR 1910.0106 E02 IVD011Jul 1973Jul 1973
29 CFR 1910.0252 D02 II11Jul 1973Jul 1973
29 CFR 1910.0157 D03 IV11Jul 1973Jul 1973
29 CFR 1910.0178 Q0111Jul 1973Jul 1973
29 CFR 1910.0219 D0111Jul 1973Jul 1973

Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.

Peer comparison

99th

Worse on violations than nearly every other employer in NAICS 2382 within IN. Peer group: 3,010 employers. This establishment has 25 OSHA violations; peer median is 0.

Fewer violationsMore violations
Penalty percentile
93rd
peer median: $0
Inspection frequency
99th
peer median: 1

Safety self-report (OSHA 300A)

Recordable injury rates the employer filed with OSHA’s Injury Tracking Application. DART covers cases with days away, restricted, or transferred; TRIR is the total recordable case rate.

DART rate
0.0
vs industry
−1.7
TRIR
0.0
vs industry
−3.0

Reported for 36 average annual employees at this establishment.

Source: OSHA ITA Form 300A (employer self-reported). Rates are per 100 full-time equivalent workers. Establishments below the ~10-FTE threshold are not required to report.

Industry benchmark

Industry avg TRIR
3.0
BLS SOII 2024
Industry avg DART
1.7
BLS SOII 2024
Self-reported TRIR
0.0
OSHA ITA Form 300A (employer self-reported)

BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.

Inspection breakdown

Planned
8
Follow-up
1

Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.

OSHA severe injury reports

No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CENTRAL SHEET METAL CO. INC.. Verify directly with Occupational Safety and Health Administration

Activity timeline

Data refreshed
Weekly
First OSHA inspection
Most recent activity
15 years ago

No federal enforcement activity has been recorded against this establishment in 15+ years. Most recent activity: 15 years ago. Data on this page is refreshed weekly.

Wage & Hour Division (WHD)

No WHD wage, overtime, or child-labor enforcement cases on file for CENTRAL SHEET METAL CO. INC.. Verify directly with Wage and Hour Division

Mine safety (MSHA)

No MSHA mine safety violations on file for CENTRAL SHEET METAL CO. INC.. Verify directly with Mine Safety and Health Administration

Labor relations (NLRB)

No NLRB unfair labor practice charges or union representation cases on file for CENTRAL SHEET METAL CO. INC.. Verify directly with National Labor Relations Board

Visa & labor certification (OFLC) — historical

No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENTRAL SHEET METAL CO. INC.. Verify directly with Office of Foreign Labor Certification

Environmental compliance (EPA)

No EPA inspections or formal enforcement actions on file for CENTRAL SHEET METAL CO. INC.. Verify directly with Environmental Protection Agency

Motor carrier safety (FMCSA)

DOT number
1414153
Operation
A

Federal Motor Carrier Safety Administration — DOT-regulated carrier registration and fleet data.

Federal criminal prosecution record

No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CENTRAL SHEET METAL CO. INC.. Verify directly with UVA Corporate Prosecution Registry

Inspection history

DateTriggerViolationsSeriousPenalty
2010-08-12Programmed Related0$0
1992-07-22Planned52$1,500
1991-06-03Unprogrammed Related1$0
1989-02-13Planned11$90
1988-03-14Follow-up0$0
1987-12-08Planned1$0
1984-07-26Planned21$90
1983-09-07Planned1$0
1983-04-05Planned1$0
1973-07-19Planned13$125

Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.

In the news

Other employers in this industry and state

Other employers in plumbing, heating, and air-conditioning contractors within IN, ordered by federal enforcement volume:

Related searches

About this data

This profile aggregates federal enforcement records on CENTRAL SHEET METAL CO. INC. from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.

Establishments are matched across agencies using normalized employer name, state, and ZIP code.

OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.

Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.

Contact sales →

Frequently asked

What is CENTRAL SHEET METAL CO. INC.'s OSHA violation history?
CENTRAL SHEET METAL CO. INC. has 10 OSHA inspections on record with 25 violations and $1,805 in total penalties.
How does CENTRAL SHEET METAL CO. INC.'s safety record compare to its industry?
CENTRAL SHEET METAL CO. INC. operates in the plumbing, heating, and air-conditioning contractors industry. The industry average Total Recordable Incident Rate (TRIR) is 3. CENTRAL SHEET METAL CO. INC.'s self-reported DART rate is 0 compared to an industry average of 1.7.