Establishment profile
CENTRAL MINNESOTA TOOL & STAMPING INC
408 NW 13TH AVENUE, LITTLE FALLS, MN, 56345
Summary
CENTRAL MINNESOTA TOOL & STAMPING INC has accumulated 23 OSHA violations across 4 inspections over 28 years of recorded history, with $3,990 in total assessed penalties.
The establishment sits in the 74th percentile for violations within its industry-state peer group of 100 employers. Inspection frequency runs at the 46th percentile. The most recent enforcement activity was recorded 16 years ago.
Federal records were found in 1 of 15 sources. Sources without matching records returned empty for this establishment.
Agency coverage
CENTRAL MINNESOTA TOOL & STAMPING INC appears in OSHA workplace safety record only. No matching records were found in WHD wage enforcement, MSHA mine safety, EPA environmental compliance, NLRB labor relations, OFLC visa and labor certification (historical), FMCSA motor carrier registration, SAM.gov federal debarment, CMS nursing home enforcement, UVA Corporate Prosecution Registry, CPSC product recalls, or NHTSA vehicle recalls. Single-agency enforcement records typically indicate either a discrete incident-based inspection or a low-risk operational profile.
OSHA workplace safety
100% of inspections at this establishment produced violations, with 4 inspections producing serious-or-greater violations.
Most-cited OSHA standards
Top OSHA standards cited at this employer, ranked by citation count. Standards (CFR sections) cluster citations into safety themes -- machine guarding, lockout-tagout, hazard communication, fall protection, process safety, etc. A concentration on one or two sections reveals a pattern that individual citations don’t. 20 distinct standards shown · 21 citations in this view · $3,990 in penalties.
| CFR section | Citations | Inspections | Total penalty | First cited | Last cited |
|---|---|---|---|---|---|
| 29 CFR 1910.0215 B09 | 2 | 2 | $140 | Feb 1998 | Oct 2005 |
| 29 CFR 1910.0095 C01 | 1 | 1 | $600 | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0095 B01 | 1 | 1 | $600 | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0215 B05 | 1 | 1 | $600 | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0147 C04 I | 1 | 1 | $420 | Oct 2005 | Oct 2005 |
| 29 CFR 1910.0305 D | 1 | 1 | $280 | Oct 2005 | Oct 2005 |
| 29 CFR 1910.0217 C02 IA | 1 | 1 | $280 | Feb 1998 | Feb 1998 |
| 29 CFR 1910.0242 B | 1 | 1 | $210 | Oct 2005 | Oct 2005 |
| 29 CFR 1910.0303 B01 | 1 | 1 | $150 | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0305 G01 IV | 1 | 1 | $150 | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0219 B02 | 1 | 1 | $105 | Feb 1998 | Feb 1998 |
| 29 CFR 1910.0243 C01 | 1 | 1 | $105 | Feb 1998 | Feb 1998 |
| 29 CFR 1910.0304 F05 V | 1 | 1 | $105 | Feb 1998 | Feb 1998 |
| 29 CFR 1910.0147 C01 | 1 | 1 | $105 | Jan 1998 | Jan 1998 |
| 29 CFR 5205.1210 | 1 | 1 | $70 | Feb 1998 | Feb 1998 |
| 29 CFR 1910.0305 A01 I | 1 | 1 | $70 | Feb 1998 | Feb 1998 |
| 29 CFR 1820.65308 | 1 | 1 | — | Feb 2010 | Feb 2010 |
| 29 CFR 1910.0147 C07 I | 1 | 1 | — | Oct 2005 | Oct 2005 |
| 29 CFR 1910.0147 C06 I | 1 | 1 | — | Oct 2005 | Oct 2005 |
| 29 CFR 1910.0217 E01 I | 1 | 1 | — | Feb 1998 | Feb 1998 |
Source: OSHA inspection citations (violation_detail). CFR section codes can be looked up at osha.gov/laws-regs for the formal standard text. Per-inspection detail and the specific violation descriptions are available by expanding individual inspections below.
Peer comparison
Above average violations in NAICS 3321 within MN. Peer group: 100 employers. This establishment has 23 OSHA violations; peer median is 11.
Safety self-report (OSHA 300A)
No self-reported injury rates filed with OSHA's Injury Tracking Application for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with OSHA Injury Tracking Application →
Industry benchmark
BLS rates reflect industry-wide averages. Self-reported figures come from OSHA’s Injury Tracking Application; absence of self-reported data does not necessarily indicate non-compliance — many establishments fall below the ITA reporting threshold.
Inspection breakdown
Complaint- and accident-triggered inspections are stronger risk signals than routine planned inspections.
OSHA severe injury reports
No severe injury reports (hospitalization, amputation, or loss of an eye) on file under 29 CFR 1904.39 for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with Occupational Safety and Health Administration →
Activity timeline
No federal enforcement activity has been recorded against this establishment in 16+ years. Most recent activity: 16 years ago. Data on this page is refreshed weekly.
Wage & Hour Division (WHD)
No WHD wage, overtime, or child-labor enforcement cases on file for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with Wage and Hour Division →
Mine safety (MSHA)
No MSHA mine safety violations on file for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with Mine Safety and Health Administration →
Labor relations (NLRB)
No NLRB unfair labor practice charges or union representation cases on file for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with National Labor Relations Board →
Visa & labor certification (OFLC) — historical
No H-1B, H-2A, or H-2B labor condition applications on file (historical data only — DOL ended OFLC publication) for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with Office of Foreign Labor Certification →
Environmental compliance (EPA)
No EPA inspections or formal enforcement actions on file for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with Environmental Protection Agency →
Federal criminal prosecution record
No federal criminal prosecutions, plea agreements, or deferred-prosecution agreements on file for CENTRAL MINNESOTA TOOL & STAMPING INC. Verify directly with UVA Corporate Prosecution Registry →
Inspection history
| Date | Trigger | Violations | Serious | Penalty | |
|---|---|---|---|---|---|
| 2010-02-04 | Referral | 2 | 2 | $1,200 | |
| 2010-01-21 | Planned | 4 | 2 | $900 | |
| 2005-09-28 | Planned | 6 | 5 | $980 | |
| 1998-01-21 | Planned | 11 | 5 | $910 |
Source: OSHA IMIS. Citation amounts reflect initially assessed penalties; final amounts after appeal may differ.
In the news
Other employers in this industry and state
Other employers in this industry within MN, ordered by federal enforcement volume:
- CRENLO LLCROCHESTER — 2 federal enforcement records
- HARVEY VOGEL MANUFACTURING COMPANYSAINT PAUL — 2 federal enforcement records
- CRENLO LLCROCHESTER — 2 federal enforcement records
- WB TOOLINGBLOOMINGTON — 1 federal enforcement record
- NELSON STAMPINGS INCBLOOMINGTON — 1 federal enforcement record
- TRIANGLE INDUSTRIES INCMINNEAPOLIS — 1 federal enforcement record
- GREATBATCH - GLOBE TOOLMINNEAPOLIS — 1 federal enforcement record
- CHASKA MACHINE & TOOL INCCHANHASSEN — 1 federal enforcement record
- PRODUCTION STAMPING INCMONTICELLO — 1 federal enforcement record
- STENCIL CUTTING & SUPPLY CORED WING — 1 federal enforcement record
Related searches
- NAICS 332All employers in this industry
- Employers in MNState-wide enforcement data
- Industry in MNIndustry × state cross-filter
About this data
This profile aggregates federal enforcement records on CENTRAL MINNESOTA TOOL & STAMPING INC from every major federal compliance and enforcement source plus the UVA Corporate Prosecution Registry. OSHA workplace safety inspections, WHD wage cases, MSHA mine safety, EPA environmental enforcement, NLRB labor relations, OFLC visa/labor certification, FMCSA motor carrier registration, SAM.gov debarments, CMS nursing-home records, BLS industry safety benchmarks, OSHA ITA self-reported injury rates, SEC enforcement and financial disclosures, CPSC and NHTSA recalls.
Establishments are matched across agencies using normalized employer name, state, and ZIP code.
OSHA citations typically appear 3–8 months after the inspection, so very recent enforcement actions may not yet be reflected. Profiles may be incomplete if the establishment operates under multiple legal names or files under variations our entity-matching rules don’t yet cover. To report a missing record or correction, email corrections@fastdol.com.
Need API access, bulk download, or licensed redistribution? The website is free. Programmatic and licensed access is handled separately.
Contact sales →Frequently asked
- What is CENTRAL MINNESOTA TOOL & STAMPING INC's OSHA violation history?
- CENTRAL MINNESOTA TOOL & STAMPING INC has 4 OSHA inspections on record with 23 violations and $3,990 in total penalties.